How do you sync a Hunter Douglas remote?
Press and hold the STOP button on the remote module. for approximately three seconds. NOTE: The Group Numbers (16) will flash to indicate that the remote module has been paired to the PowerView Shade Network. A duplicate remote will operate the same set of window coverings and GROUPS as the original remote.
How do I reset my Hunter Douglas remote?
Remove the battery cover from the duplicate remote. 3. With a paperclip, press and hold the MASTER RESET button on the backup remote for approximately 10 seconds. The Indicator Light on the front of the remote starts flashing red.
Why does my Hunter Douglas remote not work?
Most issues can be resolved with a motor reset or changing the batteries. Here is a link to the Hunter Douglas motorization support page with additional resources.If your remote is not lighting up, then try changing the remote batteries (2-CR2032): Remote Battery Instructions here.
How do I reset my Hunter Douglas motorized shades?
Basically, it boils down to doing a manual reset.
- Press and hold the manual button on the headrail gently for 6-10 seconds. When the shade jogs, immediately release the button. I suggest turning off all noise in the room.
- Watch the shade go completely up and down while it sets new limits.
- Repeat as necessary.
On all Hunter Douglas PowerView window coverings there is a manual button. On most types of blinds or shades the manual button is attached to the headrail of the shade. The exception is where the manual button is attached to a satellite eye. This is a button and receiver that is at the end of a wire.
How do I connect my Hunter Douglas hub to WIFI?
Open Menu > Select your Hub > Select the info button > Select Hub Wi-Fi Set Up and follow the wizard. Connect the power cable of the Hub to a power outlet . Watch out for the colour of the LED. Open the app and select Connect to Hub .
Does the Hunter Douglas remote have batteries?
The remote uses two CR 2032 batteries. indentation, gently lift and remove the remote module from the Pebble.
How long do batteries last in motorized blinds?
A – Battery life isn’t guaranteed as it will vary depending upon how large your window covering is and how often you use it, but should last from 12-18 months in optimal usage conditions.
How do you change the battery in a Hunter Douglas skylight?
Step 1: Using the ladder, reach up to the skylight to get a hold of the battery holder. You will find it at the bottom of the skylight, nicely tucked out of view but easily accessible. Step 2: Take the battery case out of the holder. Step 3: Detach the case from the wire that connects it to the shade.
How much is a Hunter Douglas PowerView hub?
The PowerView Hub required for smart home integration costs an additional $285, the wireless repeater is another $60, and the Pebble remote and scene controller go for $70 and $100 respectively. That brings the total cost for this project to an eye-popping $1,789.
What is a Power View Hub?
The PowerView Hub connects to a Wi-Fi router, and communicates with Hunter Douglas window coverings that feature PowerView Automation. It stores user-defined data, such as Scene and Automation information, and provides control of window coverings from anywhere in the world using the RemoteConnect feature.