How Do I Format A Reolink Hard Drive?

How to Check/Format HDD via Reolink App

1. Applies to: All Reolink NVRs.
2. Log in your NVR via Reolink App, go to Device Settings->Device Info page.
3. Choose the HDD you want to format and click on the Format button to format it.

How do I format my NVR hard drive?

How to Format a Hard Drive (DVR/NVR)

1. Step 2: On the main menu, click on Management and access the Storage menu.
2. Step 3: In the Storage menu, click on HDD Manager and select the hard drive you wish to format. Click Format.
3. Step 4: Click Save to format the hard drive.

How do I delete Reolink recordings?

Step 1: Launch Reolink App and log in to your cloud account, then click Cloud Recording and turn to the recording page. Step 2: Select the videos you need to delete, and then click on the Delete icon.

What happens when Reolink NVR is full?

If you enable overwrite function, Reolink NVR’HDD will overwrite old files when it’s full, covering 64GB at a time.

What hard drive is in Reolink?

Reolink 4K 8CH NVR Specifications

HDMI Output	3840×2160, 1920×1080, 1440×900, 1280×1024, 1280×800, 1280×720, 1024×768
HDD Installed	Pre-installed a 2TB HDD
HDD Capacity	1x internal port, 1x external port, 6TB for each port (support up to 12TB in total)

How do I add memory to Reolink?

Method 1: Add an external HDD via eSATA port. Method 2: Replace the existing HDD with another HDD with higher storage. Method 3: Place another HDD inside the NVR.
Note: The existing HDD storage for these models:

1. Reolink RLN8-410 ? 2TB.
2. Reolink RLN16-410 ? 3TB.
3. Reolink WiFi NVR ? 1TB.

How do I format a Reolink SD card?

Step 1: Launch Reolink App, then click the button in the picture below to go to the Device Settings-> Device Information-> Storage page. Step 2: Select the SD card, then tap on Format to format the SD card. Note: Please wait for a few minutes for the camera to reboot after tapping on the Format.

How do I delete a Reolink camera?

How to Delete Devices from Reolink Client (New Client)

1. Right-click on the name of the camera and click on Delete to delete the device from the list.
2. Click OK to delete the device.

How do I delete a video in Reolink NVR?

Launch Reolink App and log in to your cloud account, then click Cloud Storage and go to the recording page. Step 2. Long press any video you want to delete, select the videos you need to delete, and then click on the Delete icon.

Do I need an SD card for Reolink?

Applies to: All Reolink cameras supporting SD card. Reolink cameras support the TF type SD, SDHC, SDXC micro SD card, but please make sure that the SD card you used meets the requirements in the below table.
The Recommended SD Card Format/Type/Size for Reolink Camera.

Item	Requirement
Read and Write Speed	Class 10 or higher/ ?26Mbps
Format	FAT32

Why does Reolink connection fail?

Check whether your computer has been connected to Internet successfully. Check if the computer’s firewall has been configured properly. If you haven’t set the VPN, please also close the VPN on your computer. Refer to How to Allow Reolink Client Pass Through the Firewall on your PC.

How long does Reolink record for?

The Record Length on Reolink Client can be set to 5~60 minutes.

What format are DVR hard drives?

FAT32 is the most common file system to format a hard drive for DVR since it is universally accepted and simple to use.

Why does my DVR Say No HDD?

A Hard Drive just isn’t detected error message indicates a tough disk drive (HDD) problem inside your DVR / NVR system. To resolve the error, reseat your HDD to ensure the cable connections are safe.

How do I add a second camera to my Reolink?

Launch Reolink App, click “+” on the top right of the Devices page to add a new device. Step 2. For local access, we recommend you to add device by scanning the QR code. Note: You may tap Light to enable flash light when setting up in a dark environment.

How do I extend my Reolink camera?

WiFi Battery-powered camera: Go to Device setting -> Camera Recording -> Record Settings page, click the Post-Motion Recording Duration to choose the time 8s/15s/30s. Reolink GO PT: Go to Device setting -> Camera Recording -> Record Settings page, click the Post-Motion Recording Duration to choose the time 10s/15s/30s.

Is Reolink any good?

That process, we calculated, only took about five minutes. That’s the beauty of DIY home security products these days: Nice and speedy. Pro Tip: If you don’t have Wi-Fi, we recommend the Reolink Go cam, which is 4G LTE-enabled and can stream and record videos from virtually anywhere.

What does HDD mean on security cameras?

Security camera hard drive, or known as a surveillance-rated hard disk drive (HDD), is primarily used for surveillance video footage storage 24/7 locally.

How do I stop Reolink beeping?

Applies to: All Reolink NVR. Log in your NVR via Reolink App and go to the Device Settings page. Go to Device Settings->Alarm settings->Alarm Sound, and you can enable the Alarm Sound in this page.

How is CCTV storage calculated?

Storage Space (GB) = Bitrate (Kbps) * 1000/8 * 3600 * 24 * Cameras * Days/1000 000 000

1. *1000/8 = to convert kbps to Bytes.
2. *3600 = to convert from seconds to hour.
3. *24 = to convert from hour to day.
4. Cameras = total number of cameras.
5. Days = total number of days you want to record.

How do I Reolink playback?

Note: The playback interface may vary depending on the specific camera model. The following steps describe how to playback recorded videos via a web browser. Step 1.