How Do I Find My Synology Ip Address?

How do I find the IP address of my NAS?

Business Storage NAS – How to find the Hostname and IP address in Windows

1. Press the Windows key + R to open the Run window.
2. In the Run window, type: cmd. and press Enter.
3. In the command prompt window, type: ping BA-XXXXXX. BA-XXXXXX is the Hostname (HOST) on the drive label. Press Enter.

How do I access my Synology NAS?

How to connect to your Synology NAS

1. Fire up your web browser and enter find.synology.com or the IP of the enclosure. (There’s also the Synology Assistant you can download.)
2. Enter your account credentials and hit Log in.

Why can’t I see my Synology on the network?

Make sure that your Synology NAS and computer are located on the same local area network and subnet. Temporarily disable or remove firewall software on your computer. Try using other Ethernet cables to connect to your Synology NAS to check for defective cables.

How do I find my Synology NAS MAC address?

The MAC address for the device is printed on a sticker near the Ethernet port. If your department runs its own network, contact them and provide the MAC address for your new device.

Does a NAS have an IP address?

An NAS device is a “network attached storage” device.Once connected to the network, your NAS device will share the general IP address of your own computer. Therefore, if you want to find out the IP address of your NAS device you just have to find out your computer’s IP address through the Control Panel.

What is NAS IP address?

In a RADIUS Access-Request packet, the NAS-IP-Address attribute (RADIUS attribute 4) provides the identifying IP Address of the requesting Network Access Server (NAS).The source IP address of those packets are set to the IP address of the egress interface on the FirePass controller.

How do I access my NAS drive?

How to Map a NAS Storage Drive on PC

1. From your desktop, click on the start menu and search for This PC.
2. From the This PC window, right click on This PC and select Map Network Drive.
3. The Map Network Drive window will appear.

How do I connect my Synology NAS to my computer?

Overview

1. Open a Windows Explorer window and go to Computer.
2. Click Map network drive.
3. On the Map Network Drive window, choose a drive letter from the Drive drop-down menu.
4. In the Folder field, enter the server name of your Synology NAS and shared folder name preceded and separated by backslashes.

How do I reset my Synology IP address?

Locate the RESET button on your Synology NAS. Press and hold down the RESET button for about 4 seconds until you hear a beep. Release the button immediately. Within 10 seconds, press and hold down the RESET button again for 4 seconds until you hear 3 more beeps.

How do I change the IP address of my NAS?

Instructions

1. Within the GUI, Go to Settings > NAS Servers.
2. Once you are in the list of NAS Servers, Select the NAS Server you wish to modify.
3. Select the network interface and click on modify, Change the IP address. Then click on Update.
4. It will update the new IP and You will find changed IP address on NAS Server.

What is framed IP address?

This Attribute indicates the address to be configured for the user. It MAY be used in Access-Accept packets. It MAY be used in an Access-Request packet as a hint by the NAS to the server that it would prefer that address, but the server is not required to honor the hint.

How do I access a server?

How to Connect a PC to a Server

1. Open File Explorer and select This PC.
2. Select Map network drive in the toolbar.
3. Select the Drive drop-down menu and choose a letter to assign to the server.
4. Fill in the Folder field with the IP address or hostname of the server you want to access.

How do I connect a NAS to my network?

Connecting a Network Attached Storage to your router

1. Connect an Ethernet cable from the Ethernet port of your NAS to any of the numbered ports at the back of the router.
2. Ensure that the power adapter for the storage link device is properly and securely plugged in.

How do I connect my NAS to my router?

Connecting a Network Attached Storage to your router

1. Connect an Ethernet cable from the Ethernet port of your NAS to any of the numbered ports at the back of the router.
2. Ensure that the power adapter for the storage link device is properly and securely plugged in.

How do I connect my Synology NAS directly to my Mac?

Overview

1. Open Finder on your Mac computer.
2. Find the menu bar along the top of the screen.
3. Click Go and select Connect to Server.
4. Enter your DSM username and password.
5. Finally, if your user name credentials are correct, you will now see your Synology NAS listed under the Shared section of your Finder window.

What is the root password for Synology?

Enter the SSH port of your Synology device in the Port field, e.g., 22. Click Open. Enter the password of the default account “admin”. You are now signed in to your Synology device with root privilege via SSH.

What is the default admin password for Synology?

Double-click on your Synology device. Enter the system’s default username, admin, and leave the password field blank.

How do I set a static IP in Synology NAS?

Setting a Static IP

1. Head to Control center on your Synology NAS.
2. Select Network.
3. Select Lan 1 and press Edit.
4. From here enter the IP Address you want, and your Gateway and DNS Server. (
5. Press Ok and wait a little bit for your NAS to process to the changes.

What is the default IP address for QNAP NAS?

169.254.100.100:8080
Note: The default NAS IP is 169.254. 100.100:8080. If the NAS has been configured to use DHCP, you can use QNAP Qfinder to check the IP address of the NAS. Make sure the NAS and the computer that runs QNAP Qfinder are connected to the same subnet.