How Do I Find My Somfy Pin?

First, navigate to the main menu and into the Mobile PIN section. Once in that section, you should see your four-digit PIN: Once there, select Change PIN. You’ll have the opportunity to create a new PIN for your myLink system.

How do I reset my somfy link?

How do I reset the Link?

1. unplug the Link, the Link indicator light must be off.
2. if the Link indicator light is still on:
3. plug the Link back in while holding the button down for 8 seconds, then release the button.

How do I reset my somfy myLink pin?

If you need to change your myLink PIN for any reason, you can easily reset it the it in the myLink app. First, navigate to the main menu and into the Mobile PIN section. Once in that section, you should see your four-digit PIN: Once there, select Change PIN.

Does Somfy have an app?

iOS (iPhone/iPod Touch and iPad) & Android (phones and tablet), and both are free.

How do I pair my Somfy remote?

To enable user mode, you need your Somfy remote and a paperclip or similar device. With the paperclip, press and hold the programming button on the back of the transmitter until the window covering jogs. The window covering is now in user mode.

How do I change my WiFi connection?

To change the name of your WiFi network (also known as SSID, or Service Set Identifier), you need to enter your router’s admin page.

1. Enter your router’s IP address into your favorite web browser.
2. Log in as the administrator.
3. Go to settings and look for an option titled “WiFi name” or “SSID”.
4. Enter your new WiFi name.

How do I update Somfy?

Let’s get started.
When you get the update alert, go into the myLink app and go into the update section. Then run the update. This process is the same on iPhone and Android devices. After you hit to run the update, your myLink light will change from green to orange.

How do I add shades to my somfy myLink?

Make sure the remote/controller is operating the shade properly and that when you press UP button the shade goes up, and when you press DOWN, the shade goes down. Go to the main menu of you myLink app and click Edit. If you have multiple myLinks, select the one you wish to add to. Click on the Plus Sign.

How do I put my somfy myLink in setup mode?

First, put the myLink back into setup mode by pressing the programming button on the bottom of the myLink with a small paper clip or similar item. Confirm the status LED is solid red, indicating that the myLink is in setup mode. Next, go to your network settings and connect to the Somfy network.

Does Somfy work with HomeKit?

At presents, only the Somfy Indoor Camera is compatible with HomeKit. You must also have the QR code to connect the equipment to HomeKit. This can be found on the product, its instructions, and in the Somfy Protect app.

Is Somfy compatible with HomeKit?

A selection of Somfy equipment is compatible with HomeKit technology through TaHoma, as per Apple approval: Using io-homecontrol® protocol only HomeKit only allows 2-way radio control of equipment via smart home systems. Consequently: RTS equipment are not compatible with HomeKit (1-way radio control).

How do I use somfy myLink?

Go to network settings on your device and connect to the myLink network. Return to the myLink app and press the Search for myLink button. For local time and sunset/sunrise myLink schedules, you will need to allow the app to use your location. Choose your network, enter the WiFi network password and press Next.

What is somfy MyLink compatible with?

Compatible with Control4, Crestron, Savant, Elan, RTI, URC, Brilliant Tech and other automation systems. Control Somfy-powered solutions with any Alexa-enabled or Google Home device.

Is Control IV compatible with Somfy?

Compatible with Control4 processors running OS 2.6 and higher. Somfy Connect UAI Plus motor position feedback available on systems running OS 2.9 or higher. Integration requires both the Control4 UAI Plus driver and blinds driver.

How do I reset my somfy awning remote?

On the back of the remote control, press the prog button with a ballpoint pen and hold it. While still pressing the prog, watch out for a response from the motor. It should respond twice for a full reset.

How do I reset my somfy battery motor?

To reset the motor, press and hold the motor head programming button until the driven product briefly moves Up and Down 3 times. All the settings are erased. The driven product must be programmed.

Why is my Somfy remote blinking red?

Once you plug-in the device and switch it on the myLink will blink red. Open the myLink app and press Start New System. Follow the prompts for setup as they appear on screen. The solid red LED light is an indicator that the myLink is in setup mode.

What is my Wi-Fi password?

In Network and Sharing Center, next to Connections, select your Wi-Fi network name. In Wi-Fi Status, select Wireless Properties. In Wireless Network Properties, select the Security tab, then select the Show characters check box. Your Wi-Fi network password is displayed in the Network security key box.

How do I retrieve my Wi-Fi password?

In your router’s web interface, head to the Wi-Fi settings and look for the Wi-Fi password. If your router gives you the option to see the password, then you’ve got what you need. Otherwise, you can just change the password and then connect using the new one.

How do I find my router password?

First: Check Your Router’s Default Password

1. Check your router’s default password, usually printed on a sticker on the router.
2. In Windows, head to Network and Sharing Center, click on your Wi-Fi network, and head to Wireless Properties > Security to see your Network Security Key.