Here are the ways you can reset an LTS recorder (DVR/NVR).
Enter the reset code via the local interface
- Click the “Menu” button on the bottom left side;
- Click “Shutdown” >> “Logout”;
- Move the mouse cursor to the bottom left corner;
- Double click to open the restore password screen;
- Enter the secure code;
- Click “OK”.
How do I reset my LTS camera?
Sapphire – Reset IP Camera to Factory Defaults
- power on the camera.
- press and hold the reset button for 10 seconds.
- the camera should reboot.
- the camera will now be factory reset to all default settings.
How do I reset my LTS DVR to factory settings?
From the Login screen double-click on the lower, left-hand corner of the box. This is a hidden button which will bring up the “Restore default password” box.
What is LTS default password?
12345
The default user name is admin and password is 12345.
How do I reset my IP camera to factory settings?
How to reset IP Camera to factory defaults
- Keep the device powered on for at least 30 seconds to complete its normal startup.
- Find something like a pin to press the Reset button on the camera and hold it for 15 seconds to restore the settings to factory defaults.
How do I connect my LTS camera?
Camera Setup
- Connect the camera and the NVR to the separate switch.
- Using the IP portal tool, find the LTS IP camera, select the device and activate the camera with a password of your choosing.
- Once the camera is activated, change the IP address to an address that is free on the network.
What is LTS camera?
LTS is a leader in video surveillance solutions in the category surveillance cameras and network video recorders.Majority of LTS growth is generated by the full video product line; network cameras, NVRs, high definition analog, HDTVI cameras and DVRs, PTZ, accessories, and free application software.
Who makes LTS NVR?
LT Security Inc is one of a group of US wholesale/distribution arms of: SHENZHEN BROVISION TECHNOLOGY CO LTD. The R&D is done here in the US – everything they ‘make’ is coming from 1 of 3 factories they have in China.
How do I reset my NVR admin password?
Reset Password of DVR/NVR by Scanning QR Code
- Tap More > Reset Device Password to enter the Reset Device Password page.
- Scan the QR code on the local GUI of the DVR or NVR.
- Go to the device’s local GUI.
- Enter the received verification code on the Verify by Reserved Email window and then click OK to continue.
What is DVR default password?
DVR default password list (2020)
| DVR | USER | PASSWORD |
|---|---|---|
| Hikvision | admin | 12345 |
| Honeywell | Admin | 123456 |
| Ivio | admin | |
| Multitoc | admin | 88888888 |
How can I reset my nvms7000 password?
If you forgot the password at the beginning Login Screen, click the Forget Password button. Copy the Encrypted String and email to LTS Support team. We can help you to generate a recovery password and email you back to unlock it.
How do I reset my Hanwha camera?
Hanwha
- Press and hold reset button for about 5 seconds to reboot the system.
- Note: If you reset the camera, the network settings will be adjusted so that DHCP can be enabled.
- If there is no DHCP server in the network, you must run the IP Installer program to change the basic network settings.
How do I factory reset my HIKVision IP camera?
To reset your camera back to factory defaults:
- Disconnect the power supply.
- Press and hold the reset button.
- Keep holding the reset button and restore the power supply.
- Continue to hold the reset button for a further 10 seconds.
- Release the button and allow the camera to complete a restart/reboot.
How do I reset my NVR to factory settings?
To factory reset the device, hold the reset button down and unplug the NVR from power. Once power is removed from the unit, continue holding the factory reset switch for 4 – 5 seconds, continue holding the reset switch and plug the power supply back into the unit. You should hear a beep if not that is alright.
Why are my LTS cameras offline?
There are several reasons why your camera may be offline, including a depleted battery, high bandwidth usage, updated router settings, or wireless interference. The camera is designed to automatically re-connect once there is internet available.The camera should turn on as soon as the power cable is connected.
What is the default IP address for a LTS camera?
For other brands usernames and passwords please see below
| Camera Manufacturer | Username | Default IP |
|---|---|---|
| IPX-DDK | root | 192.168.1.168 |
| IQInvision | root | no default/DHCP |
| JVC | admin | no default/DHCP |
| LTS Security | admin | 192.0.0.64 |
Is LTS and hikvision the same?
LTS is a Hikvision OEM
As of 2020-Q1: Another customer recently asked about LTS because he wanted to replace his Hikvision DVR. Apparently, Hikvision discontinued its DDNS service about 3 years ago.
Is LTS owned by Hikvision?
90% of LTS products are from Hikvision.
Who does hikvision make cameras for?
Hangzhou Hikvision Digital Technology Co., Ltd., often shortened to Hikvision, is a Chinese state-owned manufacturer and supplier of video surveillance equipment for civilian and military purposes, headquartered in Hangzhou, Zhejiang. Its controlling shares are owned by the Chinese government.
How do I factory reset Q See NVR?
Press and hold the reset button for 15 seconds in order to reset the camera to its original factory settings. Q-See is always here to answer your questions and take your valued suggestions.
How do I reset my ZOSI DVR to factory settings without password?
How to reset Zosi DVR to factory settings
- Click the floating “Main menu”
- Click the “Advanced” button.
- Click the “reset” button.
- Click “OK” to confirm.
Contents