How do you reset a Kwikset Smart lock 914?
You can factory default your Kwikset Z-Wave Lock by removing the lock’s cover and then removing the lock’s battery pack to power the lock down. Then press and hold the “Program” button. Keep the button held down as you reapply power to the lock. Then wait, and press one more time to reset.
How do I restore my Kwikset to factory settings?
1 Factory Reset
- Open your door.
- Extend the latch bolt.
- Slide up the cover to open the back of your lock, exposing the buttons beneath.
- Push and hold the reset button for 10 seconds, until the lock beeps.
- The light ring will flash red, then spin amber.
- The lock has now been restored and is ready to be set up again.
What app works with Kwikset 914?
The Premis App gives you control in the palm of your hand.
Manage user codes, track lock status, receive lock notifications and more through the Kwikset Premis app.
Is Kwikset 914 Bluetooth?
The SmartCode touchpad smart lock with Home Connect technology enables the lock to wirelessly communicate with other devices in home. The lock allows the user (through a web enabled device) to remotely check the door lock status, lock or unlock the door.
Brand | Kwikset |
---|---|
Controller Type | Wink, Amazon Alexa, SmartThings |
How do I reset my Kwikset Smart Code?
Hold the button continuously for 30 seconds until you hear a beeping sound and see the status LED flashing red. Press the program button once again until you see the status LED flashing green and hear two beeping sounds. The Kwikset SmartCode deadbolt has now been reset and ready to be set up again.
What is the master code for Kwikset lock?
0-0-0-0
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.
How do you reprogram a Kwikset lock?
Steps to re-keying Smart Key units (Note: You must have your Functioning Key and Learn Tool for this to work).
- Insert functioning key & turn 1/4 turn clockwise.
- Insert & remove the SmartKey learn tool. Remove functioning key.
- Insert new key & turn 1/2 turn counter-clockwise. Done. Your lock is now re-keyed! “”
How do you clear the code on a Kwikset lock?
Delete A User Code:
- Make sure the door is open.
- If you have not enabled a programming code, press and release the program button. You will hear two beeps.
- Press 2 to delete a user code.
- Press Kwikset.
- Enter the user code you wish to delete.
- Enter the user code again.
- Press Kwikset.
Does Kwikset 914 work with Alexa?
What hardware is required? To connect your SmartCode with HomeConnect to Alexa you’ll need 3 pieces of hardware: Kwikset SmartCode with HomeConnect. Shop our 910, 912, 914, and 916 product here, Kwikset smart locks.
How do I factory reset my Kwikset 913?
Press and hold the program button while reinserting the battery pack. Keep holding the button for 30 seconds until it beeps. Press the program button once more in 20 seconds the LED will flash green and you will hear a beep.
How do I update my Kwikset app?
Open the Kwikset app within Bluetooth range of the lock. Tap Settings. Available to begin the updating process. Tap Update Now to update the firmware.
Is Kwikset app free?
The Kwikset App is available for free download from Google Play or App Store by searching for “Kwikset” and installing the “Kwikset Smart Lock App”.
How do I connect my Kwikset lock to my phone?
On the Overview screen, tap the More icon, then tap Add a Device. On the Add a Device screen, tap the Kwikset model number you purchased. Tap Continue. You will be presented with tasks to complete before you can move forward with device pairing.
Does Kwikset have an app?
Meet the App. Available for iOS & select Android devices, the smart lock app controls Kevo right from your smartphone or tablet. Grant access with eKeys and monitor who is locking and unlocking.
How do I reset my Kwikset SmartKey lock without key?
What You Will Need to Follow this Tutorial
- Prepare Necessary Tools And Workspace.
- Remove The Locks From Your Door.
- Free The Cylinder From The Housing.
- Get The Plug Out Of The Cylinder.
- Pull The Plug Out Of The Core.
- Find The Reset Tab To Align The Wafers.
- Insert New Key.
- Reassemble The Lock.
Contents