How Do I Factory Reset My Indoor Ring Camera?

Resetting a Ring Stick Up Cam to its factory default state will erase all its saved settings and preferences.

  1. Make sure the camera is powered up or the battery is charged.
  2. Press and hold the reset button on the back of the camera for 15 seconds.
  3. Release the button.
  4. The camera is now reset to factory defaults.

Where is the reset button on Ring indoor camera?

Ring Stick Up Cam Battery (2nd Generation)

  1. Undo the battery cover.
  2. Find the orange setup button near the battery slot.
  3. Press and hold the setup button for 10 seconds.
  4. The light on the front of the camera will flash for several minutes; when the light turns off the reset is complete.

How do I factory reset my ring without the app?

Ring Doorbell: How to Hard Reset

  1. Locate the orange button located physically on the back of the doorbell.
  2. Press and hold the orange button for more than 15 seconds.
  3. Release the button after 15 seconds.
  4. Let the device complete the reset for about 5 minutes, and the hard reset should be completed.

How do you set a ring back to factory settings?

Remove the doorbell’s faceplate then press and hold the reset button on the right side of the camera for 15 seconds. After releasing it, the ring light located on the front will flash a few times indicating the doorbell is restarting. The doorbell is now reset to factory defaults.

Can a ring camera be factory reset?

1 Factory Reset a Spotlight/Floodlight Cam
Make sure the camera is powered up.Press and hold the reset button atop the camera for 30 seconds. After releasing it, the status light located at the bottom will flash a few times indicating the camera is restarting. The camera is now reset to factory defaults.

How do I reset my ring camera from previous owner?

How Do You Reset the Ring Doorbell for a New Owner?

  1. Remove the back plate from the Ring.
  2. Hold the orange button on the back of the device for 15-20 seconds.
  3. Once you see the Ring flash a light on the front, you’ll know it has completed the hard reset successfully.
See also  Does Eufy Replace Doorbell If Stolen?

How do I set up my ring camera?

Setting Up Your Ring Stick Up Cam in the Ring App

  1. Step One – Download the Ring App.
  2. Step Two – Create or Log in to Your Account.
  3. Step Three – Tap “Set Up a Device”
  4. Step Four – Scan the QR code or MAC ID barcode on your Ring device.
  5. Step Five – Specify Your Location.
  6. Step Six – Name Your Device.

Why did my ring camera stop working?

The most common causes of not being able to do a Live View or see a recorded video are: A poor connection between your mobile device and the internet. Slow internet upload and download speeds. A poor connection between your Ring device and your router.

How do I get my ring camera back online?

Follow these steps to reconnect your doorbell or security camera wifi in the Ring App:

  1. Tap on the three lines on the top left.
  2. Tap Devices.
  3. Select doorbell or security camera you need to reconnect to wifi. The next screen is the Device Dashboard.
  4. Tap on Device Health.
  5. Tap on Reconnect to Wifi or Change Wifi Network.

How do you reset a ring chime?

Insert a pin or paperclip into the pinhole, then press and hold the reset button for 15 seconds. Release the reset button. The status light located on the front of the Chime will flash quickly a few times indicating that it is restarting. The chime is now reset to factory defaults.

How do I delete my Ring account?

Delete the account

  1. Log in to the account by clicking here and use the password you just created.
  2. Once you’re in the account, go to the Data Requests page by clicking here.
  3. Click Delete my Account.
See also  What Does A 24V Transformer Do?

How do you reset a Ring base station?

To factory reset your Keypad, press and hold the pinhole reset button in the back of the Keypad for 10 seconds, until it flashes red.
Range Extender (1st gen)

  1. Plug in the Range Extender.
  2. Press and hold the button on the right hand side of the device.
  3. When the LED begins to blink slowly, release the button.

How do you reset ring camera app?

Rebooting the Ring Spotlight Cam

  1. Press the reset button on the top of the spotlight camera.
  2. Hold down the reset button for twenty seconds.
  3. Check your Ring app to see if the spotlight cam reappears as an available device once the wireless connection is reestablished.

Can there be two owners on ring?

Ring doorbells, and Ring cameras with Shared Users. Shared Users have limited access to the Ring devices and can’t control settings. An account Owner can invite an unlimited number of Shared Users to share their Ring devices.Ring doorbells, Ring cameras, and Ring Alarm allow an unlimited number of Shared Users.

How do you set up a ring for someone else?

To add someone as a Shared User to a Ring Account:

  1. Open the Device Settings page in the Ring App for one of your Ring devices.
  2. Tap Shared Users.
  3. Tap Add User.
  4. Enter the email address of the person you want to add as a Shared User.
  5. Select the devices you want to share with this person.
  6. Tap Send Invite.

How can I talk through my indoor ring camera?

Actions in Live View

  1. Enable Sound – Listen-in on what’s going on in your property. Select the speaker button to enable.
  2. Two-Way Talk – Speak to whoever’s there. Select the microphone button to start talking.
  3. Activate Siren – Sound a security camera siren.
  4. Turn on Lights – Turn on your lights.
See also  Do Security Cameras Violate Hipaa?

What does blue light on Ring indoor camera mean?

If you see the Ring Camera blinking blue when setting up the device, there is nothing to worry about. This is the camera’s way of notifying you that it is being set up. As soon as the setup is over, the light begins to change to a solid blue, indicating that the camera is starting to function.

Can you turn off ring indoor camera?

Yes, the new-ish “mode” selection in the ring app can disable the indoor cameras for BOTH motion AND viewing.The only way to turn off motion alerts or motion recording is by setting a schedule or by manually doing it in the app.

Where is Ring camera QR code?

The QR code or MAC ID can be found on the back of your Floodlight Cam. Point the camera on your smartphone at the QR code or MAC ID barcode on your Floodlight Cam. This code can also be found on the product packaging or on the Quick Start Guide that came with your device.

How can I set my Ring camera without WiFi?

Use a Portable Hotspot if You Don’t Have a Wi-Fi Network to Connect to. You can also connect your Ring Doorbell to a WiFi hotspot if you don’t have access to a full wireless network from a router. The device will be able to function properly when connected to a hotspot.

Does Ring indoor camera need WiFi?

The Ring Indoor Cam features 1080p full HD resolution, two-way audio, HD video recording, and a wide viewing angle. It’s lightweight, compact, and has flexible mounting options.
Product Specs.

Ring Indoor Cam
Connectivity 2.4GHz Wireless 802.11 B/G/N

Contents

This entry was posted in Smart Doorbell by Ruben Horton. Bookmark the permalink.
Avatar photo

About Ruben Horton

Ruben Horton is a lover of smart devices. He always has the latest and greatest technology, and he loves to try out new gadgets. Whether it's a new phone or a new piece of software, Ruben is always on the forefront of the latest trends. He loves to stay up-to-date on the latest news and developments in the tech world, and he's always looking for ways to improve his own knowledge and skills.