How Do I Dim My Vivint Panel?

Control panel, follow these steps:

1. From the home screen of your Go! Control, tap Security.
2. Tap Menu.
3. Tap Toolbox.
4. Tap brightness/volume.
5. Use the buttons on the right and left to increase or decrease the volume and brightness setting on your panel.
6. Tap ok to save the settings.

How do I dim the light on my Vivint panel?

Vivint Smart Hub – Adjust Brightness

1. From the home screen of the Smart Hub display, tap the Menu icon in the bottom right corner.
2. Tap Devices.
3. Enter 4-digit PIN.
4. Tap Smart Hub and then tap Display.
5. In the display menu, use the slider to adjust the brightness of the screen.

How do I turn off the light on my vivint?

Tap Settings. Enter your 4-digit PIN. Tap Panel. Under Display, tap Brightness and use the slider to adjust the brightness of the panel.

How does vivint lamp module work?

The module plugs into a wall outlet and the lamp or appliance is plugged into the module’s side outlet. It controls any small appliance that can be plugged in such as lamps, curling irons, toasters, coffee pots, televisions etc.

What does silent exit mean on vivint?

On the Exit Delay screen, a Silent Exit button is displayed. Selecting any of these options silences the Exit Delay beeps while the system is being armed. When arming, selecting this option doubles the length of the Exit Delay.

How do I turn off the night light on my Vivint?

Go! Control – Adjust Back-Light

1. Go to the home screen of your Go! Control panel and tap Security.
2. Tap Menu.
3. Tap Toolbox.
4. Tap the right arrow until you can see and select backlight timeout.
5. Select the desired amount of time you’d like the backlight to remain on.

What is a Vivint repeater?

The repeater device contains a rechargeable battery that can provide up to 30 hours of backup standby power when primary (external) power is lost. This document includes installation, usage, and test instructions, as well as technical specifications and regulatory declarations.

How do I turn off vivint low battery?

You can silence the Vivint low battery notification by tapping the alert notification on the left side of the SkyControl’s home screen and reading the whole message. In rare instances, you may have a bad backup battery, and you will need to contact Vivint directly for support.

Why does my Vivint panel have a green light?

The home button on your panel will glow different colors depending on the status of your home. When the home button glows green when your home is ready to arm. When your home is armed, the home button will glow red. When your home is not ready to arm, the home button will glow orange.

Why is my Vivint panel beeping?

A panel low battery alert means that the panel backup battery is low.If you have experienced a power outage, the back up battery will keep your system working, but you may get a low battery alert. You can acknowledge the alert to stop the panel from beeping. The backup battery will re-charge once power is restored.

How do I connect Vivint lights?

At the Vivint panel, press the Home button, then select the three dots in the bottom right-hand corner of the panel. Select Software Version and enter the 4-digit code that appeared in Site Manager after unlocking the Installer Toolbox. Select Smart Home Devices > Z-wave > Add Node. Turn on the physical light switch.

Does Vivint work with Z-Wave?

Vivint works well with Z-Wave.

How do I install a Vivint light sensor?

To add a lighting module to your system, complete the following steps:

1. Go to your SkyControl panel and tap the menu button in the bottom right corner (three horizontal lines).
2. Tap Settings.
3. Enter your 4-digit PIN.
4. Call or chat in to have one of our agents unlock your Installer Toolbox.
5. Tap Z-Wave.
6. Tap Add Node.

How do I silence my Vivint alarm without the code?

To disarm your alarm, Touch the Shield icon on your home screen and drag it down to disarm. 4. Press the alarm icon in the middle to disarm the system and cancel the alarm if there is an alarm in the process.

Is there a panic button on the Vivint app?

The Vivint Smart Home app gives you access and control to your home from anywhere.? You can also activate a Panic alarm, request dispatches, and notify Vivint of false alarms.

How do I use my Vivint alarm without service?

Yes, Vivint devices can be used without being monitored. You cannot, however, use the app on your phone. You may still activate and deactivate the alarm and arrange it to automated things like the security door or the thermostats when you leave.

What does the red light mean on a vivint camera?

The Vivint Indoor Camera was previously known as the Ping Camera. White: Connected/normal operation No Light: Privacy mode enabled or no power Green: Ready to connect Yellow: Rebooting Red: Not connected to the panel Breathing White: Connected to the panel, but not connected to the internet.

Why is my vivint camera red?

Solid Red: Internal error. Unplug the device for 30 seconds, plug it back in and wait for it to boot up. Contact support if the problem persists.

How do I reset my frozen vivint panel?

Ensure the device remains in this state for at least 30 seconds after which you have to put the battery back inside. Remount the side panel and plug the panel back into your wall. After 2-3 minutes, the panel should start working again.

How do I setup my vivint repeater?

Mounting the Repeater
Connect the power supply to the back of the repeater. Push the cable snugly into the slot (under the cable retention tabs). Choose an appropriate location to mount the repeater (see Installation Tips below). Using a wall anchor, screw the back piece to the wall through the screw mounting hole.

What is a Z-wave repeater?

Strengthen Your Z-Wave Network
The repeater improves the signal strength of Z-Wave Plus networks by adding an additional Z-Wave node to pass along commands from transmitters to their intended receivers, increasing the range and signal strength of your Z-Wave Plus network.