What does the numbers on a key mean?
Key Identification Numbers
Keys are typically printed with an alphanumeric code called a key identification number, a key code or a key number that allows locksmiths and companies to replicate keys without the need to install a whole new lock system. Key codes fall into two categories: blind codes and bitting codes.
How do you identify a key number?
In most cases the key number will be stamped on the front of the lock next to where the key enters. In some cases the number may also be stamped on the original key.
How do I find my key lock code?
Your key code is typically stamped on the face of the lock or key, but some manufacturers print them on a “key code card” with the printed cutting number.
How many digits is a key code?
Answer: There are five or six digits in a key bitting number because most pin tumbler locks have five or six active pin chambers.
Do master keys exist?
Any key that can open two or more locks is considered a master key. Many master keys use pin and tumbler locks. For a master key to work, though, there must be something called master wafers inside the lock.A master key is one that works with multiple master wafer configurations.
How do I know if I have master key?
“Master keys are identified with a simple test. You can test whether or not you have a Master key by watching the Security light as you insert your key into the ignition. If the Security light turns off immediately after insertion of the key, it is a Master key.
How do you identify a master key?
Each key in a Master Key system is stamped with identifying letters and numbers to match it with a door name or location. (Keys in a large MK system would be stamped with a machine.) Note the skeleton keys hanging at the top left of this photo. Any key that operates two or more unique locks can be called a master key.
Can you get key code from VIN number?
You may obtain the key code for a vehicle by providing the VIN to the vehicle manufacturer or vehicle dealer and request the key code.There are a number of “Code Brokers” who offer a service for getting the key code from the VIN.
Where is the ignition cylinder code?
The cylinder code is usually a 3 or 4 digit code on the ignition switch cylinder. It’s normally on the left side of the cylinder that you put your key into. You might have to loosen or turn the ignition cylinder to be able to see this number.
Are key codes universal?
It depends whether you’re interested in which physical key the user has pressed or which character the user has typed. If it’s the character you’re after, you can get that reliably in all major browsers (using the keypress event’s which property in most browsers or keyCode in IE <= 8), but only in the keypress event.
What is the bitting of a key?
Bitting is the depth of key cuts on a cylinder key for a pin tumbler lock, often expressed as a number. Bitting also refers to the combination of key cuts on a bit key for a warded lock or lever tumbler lock.
How can you tell if a key is antique?
If you are not sure what kind of metal your key is made of, one of the easiest ways to find out is to hold a magnet to it. If the key does not stick to a magnet, it is likely stainless steel or brass. If the key does stick to a magnet, it is most likely made out of steel and iron.
What is a Y11 key used for?
The HY-KO Y11 Blank Yale Lock Key is a nickel-plated brass, precision-milled replacement key. The key is designed for use with compatible Yale locks and padlocks.
Can you duplicate a key that says do not duplicate?
The truth is there’s no law regarding do not duplicate keys. The engraved message found on many business keys is not legally binding it’s just a recommendation. Though many chain hardware stores, such as Ace, may refuse to cut a copy of these keys, a locksmith can easily duplicate them.
Are all Schlage keys the same?
Please note, products are not keyed alike across functions. Schlage Rekeying Kits provide everything you need to get the job doneincluding all the tools and parts you need for repinning the cylinders of most Schlage locksets so that they work with a single key. Navigating your way through the Kit tray.
What’s a 999 key?
Bump keys are specially cut keys that can bypass the security mechanisms built into traditional pin and tumbler locks. Bump keys are also referred to as 999 keys because all of their ridges are cut to the maximum depth (999) in a key-making machine.
Are skeleton keys illegal?
In order to prevent skeleton keys from allowing illegal entry, lock manufactures began to add wards around the outside of the lock as well as in the center. This prevented the successful use of skeleton keys. Skeleton keys of this sort are no longer in common usage, other than in furniture such as china cabinets.
Are bump keys legal?
California. It’s not illegal to purchase and own lock pick tools, Bump keys, bolt cutters, and the like in California. But a person is charged with a misdemeanor if there’s intent to use the tools to break or enter a building without due permission.
Who can cut a master key?
Master Locksmith
Restricted master key systems which provide the best level of security with the ability to provide tiered access for individuals and robust key control. Keys can only be cut by the Master Locksmith who provided your system and then only with the authorization of a registered signatory.
What is grand master key?
A grand master key system is an extensive system that requires locks to be master keyed in groups, with a master key to operate all locks within its own group but no other group and has a grand master key which will operate all locks in every group.
Contents