How Do I Connect To Yale Wi-Fi?

In the Yale Access app, go to the side menu (upper left), tap Set Up New Device. Choose Set Up A Connect. Choose a lock with which to associate your Yale Connect Wi-Fi Bridge. When prompted, plug connect into an outlet near your door and then follow the in-app instructions.

https://www.youtube.com/watch?v=rF5de008J0Y

How does Yale Connect work?

How does Yale Connect work? Yale Connect plugs into any power outlet near your Yale Access Smart Lock and uses your home’s Wi-Fi and Internet connection to control your Yale Access Smart Lock.

How do I connect to my Wi-Fi network?

Connecting to a Wi-Fi network

1. Open the Settings app. It’s found in the apps drawer, but you’ll also find a shortcut in the quick actions drawer.
2. Choose Wi-Fi or Wireless & Networks.
3. Choose a wireless network from the list.
4. If prompted, type the network password.
5. Touch the Connect button.

How do I connect my camera to my wireless router?

Simple steps to connect camera to WiFi network via PC or Mac:

1. Connect camera to power using 12V DC power adapter and wait approx.
2. Connect camera to WiFi router using Ethernet Cable.
3. Download and install IP Search Tool (Platinum IP Portal) for PC/Mac from.

Why wont my surveillance camera connect to WiFi?

My camera cannot connect to Wi-Fi
Consult the settings of your router or contact your internet service provider to enable the 2.4Ghz b / g / n network. There may be complications with the Wi-Fi connection if you want to use the camera on a guest network.

How do I set up Yale access?

How to Set up a Device in the Yale Access App

1. Download the Yale Access App. Download the free Yale Access App on your smartphone and create an account.
2. Enable Bluetooth.
3. Set up the Device in the Yale Access App.
4. Scan the QR Code.
5. Install Your Assure Lock.
6. Power Your Assure Lock.
7. Create Master Entry Code.
8. Remove the Batteries.

How do I setup my Yale Smart Lock?

1. Install Nest x Yale Lock.
2. Remove your old lock. Remove the current lock and strike plate if you have one already installed on the door.
3. Install the deadbolt.
4. Install the strike plate.
5. Install the keypad on the outside of the door.
6. Install the mounting plate.
7. Install the lock.
8. Test and set up your lock.

What does a Yale WIFI bridge do?

YALE CONNECT WI-FI BRIDGE – Enables integrations like Voice Assistant and remote functionalities of your Yale Smart Lock from your phone, such as lock/unlock your door remotely and instant alerts.

How do I connect my iPhone to my WiFi?

Connect to Wi-Fi on your iPhone, iPad, or iPod touch

1. From your Home screen, go to Settings > Wi-Fi.
2. Turn on Wi-Fi. Your device will automatically search for available Wi-Fi networks.
3. Tap the name of the Wi-Fi network that you want to join.

How do I connect my iPhone to wi-fi?

Connect to Wi-Fi on your iPhone, iPad or iPod touch

1. From your Home screen, go to Settings > Wi-Fi.
2. Turn on Wi-Fi. Your device will automatically search for available Wi-Fi networks.
3. Tap the name of the Wi-Fi network that you want to join.

Why is my phone not connecting to WiFi?

Reset your phone’s network and OS settings
Restarting your phone can clear glitches and help it reconnect to Wi-Fi. If your phone still won’t connect, then it’s time to do some resetting. In the Settings app, go to “General Management.” There, tap “Reset.”Your phone will restart — try connecting to Wi-Fi again.

How do I connect my wireless camera to my phone?

Enable Wi-Fi in the Android Settings app.

1. Tap the app Settings icon.
2. Tap Wi-Fi in the Settings app.
3. Enable Wi-Fi.
4. Press the button to which WIRELESS COMMUNICATION has been assigned or select WIRELESS COMMUNICATION in the camera menus.
5. Highlight a camera and tap CONNECT to connect.

Why does my security camera Say no signal?

One of the most common problems when a camera is not displaying video is a bad cable or BNC connection.If you do not get a video signal, disconnect the power cable from your camera. If you have a test monitor that can supply power to your camera, connect the power output of the monitor to your camera.

How do I install Yale Access Module?

Installing the Module

1. Remove battery cover. Using a Phillips-head screwdriver, loosen the battery cover screw.
2. Remove a battery.
3. Insert the module.
4. Replace the battery.
5. Replace the cover.
6. Registering the Module.
7. Set up your lock in the Yale Access App.
8. Set up the Yale Connect Wi-Fi Bridge.

How do I connect my Yale Smart lock to my iPhone?

Tap the + icon next to your home name to add a new lock. Tap the Yale lock when it appears as an available device. Using your iPhone® or iPad®, scan the 8-digit Accessory Set-Up Code located on the back of your iM1 Installation Manual (inside the Network Module box). You can also manually enter this code in the app.

Why is my Yale lock not working?

If you find that the issue is the lock, try rebooting the lock first. To reboot the lock, remove one battery from the lock and replace it. Once you have rebooted the lock, try the entry code again. If this does not work, the keypad must be reset.

How do I connect my Yale lock to Google home?

Under Assistant, go to Home Control. Tap the plus sign icon in the bottom right corner to Add devices. Select Yale. Sign in with your Yale Access account information to see your lock(s) listed in Google Assistant’s Devices section.

How do I setup a wireless bridge?

Place the wireless bridge within range of your wireless router’s signal, and also within a cable’s length of your wired devices. If your router supports Wi-Fi Protected Setup, or WPS, setup is easy. Simply press the WPS buttons on your bridge and router to link them wirelessly.

How do I reset my Yale connect?

To perform a hard reset on your Connect, leave the device plugged in and hold the reset button down for 5 seconds, then let go. You should see a pulsating green light, which indicates that the device is back in set up mode.

How do I connect my Yale lock to my nest?

How to Connect the Nest x Yale Lock to the Nest App

1. Sign into your Nest account or create one. If you’re new to Nest: Go to the Apple App Store or Google Play to download the Nest app and create a free account.
2. Scan the QR code.
3. Add the lock to your Nest account.
4. Create Nest passcodes.

Can’t connect to Wi-Fi on iPhone?

How to Fix iPhone Wi-Fi Problems

1. Make sure Wi-Fi is on.
2. Check if airplane mode is on.
3. Check if the Wi-Fi network is password protected.
4. Check for iOS updates.
5. Restart your iPhone.
6. Reset iPhone network settings.
7. Turn off location services.
8. Restore your iPhone to factory settings.