To install your Yale Connect: In the Yale Access app, go to the side menu (upper left), tap Set Up New Device. Choose Set Up A Connect. Choose a lock with which to associate your Yale Connect Wi-Fi Bridge. When prompted, plug connect into an outlet near your door and then follow the in-app instructions.
How do I connect my Yale lock to Bluetooth?
Trying to connect over Bluetooth
- Open the Yale Access App and go into Settings.
- Navigate to Connect Settings.
- Select Disconnect Device to unpair the Connect from the lock.
- Select Disconnect to complete the action.
Why is my Yale lock not connecting to Wi-Fi?
Reset your Smart Lock by removing and reinstalling batteries after checking battery life. Unplug the Yale Connect Wi-Fi BridgeConnect for a few seconds, and plug it back in. Configuration errors. Reset the Yale Connect Wi-Fi Bridge by holding down the button for 5 seconds and set up again using the Yale Home app.
Where is QR code on Yale lock?
When setting up your product, the app will ask you to first scan your Yale Access QR Code. This code is located on either documentation insider your packaging, on your smart module, or on the battery cover of your product. If you cannot locate your QR code, you can manually enter the serial number into the app.
Why is my Yale lock not working?
If you find that the issue is the lock, try rebooting the lock first. To reboot the lock, remove one battery from the lock and replace it. Once you have rebooted the lock, try the entry code again. If this does not work, the keypad must be reset.
How do I reset my Yale WiFi lock?
Open the Yale Access App and go to House Settings. Select the Yale Connect Bridge Settings menu. Scroll to Factory Reset. Select Reset Connect.
How do I connect to Yale WiFi?
Get This Service
- Self-service.
- Connect to the Yale Secure wireless network on your personal device. Search for WiFi networks and connect to the “YaleSecure” SSID. Enter your NetID and password to complete the connection.
How do I connect Nest Yale lock to nest app?
How to Connect the Nest x Yale Lock to the Nest App
- Sign into your Nest account or create one. If you’re new to Nest: Go to the Apple App Store or Google Play to download the Nest app and create a free account.
- Scan the QR code.
- Add the lock to your Nest account.
- Create Nest passcodes.
How do I set up Yale?
- Install Nest x Yale Lock.
- Remove your old lock. Remove the current lock and strike plate if you have one already installed on the door.
- Install the deadbolt.
- Install the strike plate.
- Install the keypad on the outside of the door.
- Install the mounting plate.
- Install the lock.
- Test and set up your lock.
Is there an app for Yale lock?
In order to provide optimal service to all our users, Yale maintains app support for the two most recent operating systems for both iOS and Android platforms. More information about compatible devices is available in this article.
How do I access my Yale lock?
With Yale Access your lock will automatically unlock as you approach, with your smartphone, via Bluetooth. You don’t even have to take your phone out of your pocket! No phone on you? No problem, you can always unlock the door by entering your entry code on the backlit keypad.
Why is my Yale lock not locking?
Try these quick fixes: Gently close your door and use the thumb turn inside your home to lock it. If there’s any friction, or if you need to push or pull on the door to get the lock to fully engage, it’s a good sign your deadbolt is misaligned. With the door open, extend the deadbolt and clean it thoroughly.
How do I reset my Yale lock?
Remove the mounting plate to reveal the reset button, which is located on the left side of the cable connector. Hold down the reset button while you put in the batteries. Keep holding down on the reset button until the light turns red and the lock says Just a moment, erasing all settings. Release the reset button.
To reset the lock to factory default, see the following:
2. The reset button (see image at right) is located above the PCB cable connector. 3. Hold down the reset button for a minimum of 3 seconds and then reinstall the batteries; once the batteries are properly installed, release the reset button.
How do I reset my Yale connect?
To perform a hard reset on your Connect, leave the device plugged in and hold the reset button down for 5 seconds, then let go. You should see a pulsating green light, which indicates that the device is back in set up mode.
How do I change the Wi-Fi on my Yale alarm?
To connect to a different Wi-Fi network, press the Reset button for 10 seconds to reset the camera then reconnect to Wi-Fi when the red and blue light flashes. Enter the App, go to the camera preview page, click the gear icon in the top right corner, then click on Wi-Fi and follow the prompts.
How do I connect my Yale lock to Alexa?
How to use Alexa with your Yale Assure Lock / Lever with Z-Wave or Zigbee
- Tap the menu (three horizontal lines in the top left)
- Tap Smart Home.
- Tap Devices.
- Tap on your lock.
- Tap Edit.
- Tap to enable: Unlock by app will enable the ability to unlock your lock manually from the Alexa app.
- Tap the back arrow to confirm.
How do I setup a wireless bridge?
Place the wireless bridge within range of your wireless router’s signal, and also within a cable’s length of your wired devices. If your router supports Wi-Fi Protected Setup, or WPS, setup is easy. Simply press the WPS buttons on your bridge and router to link them wirelessly.
How do I connect my nest Yale WIFI lock?
Your lock doesn’t connect directly to Wi-Fi. Instead, it uses a Google Nest Connect or Google Nest Guard for its internet connection. So you’ll only need to update the Wi-Fi information on your Connect or Guard in order to get your lock back online.
Is Nest connect required for Yale lock?
If you purchase the Nest ? Yale Lock from store.nest.com, you have the option to buy it with or without a Nest Connect. That way, if you already have a Google Nest Secure alarm system, you can purchase the lock without Nest Connect and you’ll still have everything you need to make it work.
Contents