How Do I Connect My Yale Lock To Smartthings?

Connect Your Yale Lock To SmartThings

1. If needed, press any key on the lock to wake it.
2. Enter the 4- to 8-digit Master PIN code followed by the # or “gear” key.
3. Press 7 followed by # or “gear”
4. Press 1 followed by # or “gear”
5. Wait up to 60 seconds.
6. When the device is discovered, it will be listed at the top of the screen.

Does Yale lock work with SmartThings?

Yale locks with Zigbee, Z-Wave or Z-Wave Plus are compatible with Samsung SmartThings hubs and the SmartThings app (both the SmartThings Classic and SmartThings Samsung Connect apps).

How do I connect smart lock to SmartThings?

Connecting to a SmartThings Z-Wave Hub

1. Open the August app.
2. Switch to the SmartThings app. Do not close the August app.
3. Select the + icon.
4. Select Add Device.
5. Select By Brand.
6. Select August Home.
7. Select Door Locks.
8. Select August Z-Wave Lock.

How do I link my Yale lock to my phone?

Tap the + icon next to your home name to add a new lock. Tap the Yale lock when it appears as an available device. Using your iPhone® or iPad®, scan the 8-digit Accessory Set-Up Code located on the back of your iM1 Installation Manual (inside the Network Module box). You can also manually enter this code in the app.

How do I connect my Yale network lock?

In the Yale Access app, go to the side menu (upper left), tap Set Up New Device. Choose Set Up A Connect. Choose a lock with which to associate your Yale Connect Wi-Fi Bridge. When prompted, plug connect into an outlet near your door and then follow the in-app instructions.

What hub do I need for Yale lock?

Yale iM1 Smart Module (Apple HomeKit)
*To be able to control your lock, and other HomeKit devices, from outside of your home, you’ll need an Apple TV 4th Gen or later, iPad or HomePod set up as a home hub.

How do I connect my Yale lock to Alexa?

How to use Alexa with your Yale Assure Lock / Lever with Z-Wave or Zigbee

1. Tap the menu (three horizontal lines in the top left)
2. Tap Smart Home.
3. Tap Devices.
4. Tap on your lock.
5. Tap Edit.
6. Tap to enable: Unlock by app will enable the ability to unlock your lock manually from the Alexa app.
7. Tap the back arrow to confirm.

How do I add lock manager to SmartThings?

1. Install the Lock Manager App.
2. Install the Lock User and Keypad Child apps.
3. Install the lock Device Type Handler (DTH)
4. Use the Lock Manager Smartapp.
5. Once you’ve done the initial setup and hit Done in the app you’ll find the Lock Manager app listed in your apps list on your SmartThings tab.

Where is QR code for Yale lock?

When setting up your product, the app will ask you to first scan your Yale Access QR Code. This code is located on either documentation insider your packaging, on your smart module, or on the battery cover of your product. If you cannot locate your QR code, you can manually enter the serial number into the app.

Can I control my Yale lock from my phone?

Together with Yale, we’ve crafted a tamper-proof, connected lock that lets you use your phone to control access to your home. You can remotely lock or unlock your door, schedule guest access, and view a history of who unlocked the door and when.

Is there an app for Yale locks?

The Yale Access App is needed to control your Yale products from your mobile device. The Yale App is available for iPhone and Android .

Can Alexa unlock nest Yale lock?

With the addition of the new unlock skill, Yale Assure Locks can now be unlocked using Alexa voice commands when used with a compatible smart home hub or the Amazon Echo Plus and a Yale Assure Lock with Zigbee.

How do I connect Yale Z-wave to SmartThings?

Yale locks with Zigbee, Z-Wave or Z-Wave Plus are compatible with Samsung SmartThings hubs and the SmartThings app.
Pin Code Management

1. Open your SmartThings app.
2. Tap the + icon.
3. Tap ‘Add Automation’
4. Tap ‘Smart Lock Guest Access’
5. Tap ‘Continue’
6. Tap ‘Allow’

What is a smart lock hub?

A Smart Hub is a small device you’ll connect to your home’s Internet. It allows you to control compatible smart devices from anywhere using an app on your phone.

What does the Schlage button do?

The alarm is disabled by default, but if you’re not sure whether the alarm is enabled or not, you can press the inside Schlage button. If it makes a loud chirp noise and lights up, then the alarm is enabled. If it’s not enabled, the lock won’t beep or light up.

Do I need August connect?

Best answer: No. The August Wi-Fi Smart Lock has everything built inside and can connect to the Internet without a Connect Bridge. If you have an August Smart Lock or a Smart Lock Pro (Generation 1, 2, or 3), your smart lock will function locally via Bluetooth connection without a Connect Bridge.

How do I add a custom code to SmartThings?

Sign in to the Developers section of the SmartThings website (link in the top right corner of this page). Choose Device Types, then Add a New Device Type from Code. Paste in the code you copied, change anything necessary based on the author’s instructions, then CREATE it for yourself.

Does SmartThings have a web interface?

Samsung’s first Wi-Fi router with its SmartThings hub built-in will soon get a web-based way to set it up. Samsung will keep improving its Wi-Fi mesh and smart home system, adding a web-based-interface to setup and control its functionality, a Samsung rep told CNET en Espa?ol.

How do you add a handler to SmartThings?

Adding And Installing A Device Handler

1. Log Into The SmartThings App. Open the app and log in with the same username and password for your smart home hub.
2. Click On My Device Handlers.
3. Click On Create New Device Handler.
4. Publish.
5. Assign The Device Handler To Your Device.
6. Test Your Custom Device Handler.

How do I connect Nest Yale lock to nest app?

How to Connect the Nest x Yale Lock to the Nest App

1. Sign into your Nest account or create one. If you’re new to Nest: Go to the Apple App Store or Google Play to download the Nest app and create a free account.
2. Scan the QR code.
3. Add the lock to your Nest account.
4. Create Nest passcodes.