How to connect Google Assistant:
- Set up your Plug with your Wyze app and name your Plug.
- Update your Plug firmware to the latest version by going to Account > Firmware Upgrade.
- Download and configure the Home app by Google.
- Launch the Home app.
- Tap Add.
- Tap Set up device.
- Tap Works with Google.
Can you control WYZE plug with Google home?
Yes, Wyze plug is compatible with Alexa and Google Assistant.
How do I connect my WYZE plug?
- Plug in your Wyze Plug into an outlet. The status light on the plug will flash blue, indicating it’s in pairing mode.
- Tap Next.
- Select your network and enter your network password. Tap Next.
- Pairing will complete automatically.
- Enter a name for your Wyze Plug, then tap Finish.
Why is my WYZE Smart Plug not connecting?
If plugged in and powered on, please try Power-Cycling the Plug next. To do this, unplug it, wait a few seconds, then plug it back in. If you’re still not seeing the Plug online after Power-Cycling, try a Factory Reset to re-add the Plug to your account.
Do WYZE plugs need a hub?
Wyze Plug connects direct to your WiFi so there’s no need for a Hub. 5GHz networks are not supported.
How do I connect my WYZE thermostat to Google home?
How Do I Sync Wyze with Google Home?
- If this is your first Wyze device, download the Wyze app onto your smartphone and create an account.
- Tap Home.
- Tap the plus sign in the top left corner.
- Select Add Device.
- Tap Home.
- Select Wyze Thermostat.
- Tap Begin Preparation.
Does Wyze Cam v3 work with Google Assistant?
Wyze Cam v3 is compatible with Alexa, Google Assistant, and IFTTT. Use your voice to control your camera, pull up the live view on your smart screens, or set up commands and actions with IFTTT.
How do WYZE plugs work?
The item works exactly as you’d expect: you plug it into a wall outlet, then plug the item you want to control into the Wyze Plug. The LED shows the plug’s status and the button enables you to put in into pairing mode.Users must add the Wyze Plug as a new device in the Wyze app before they can use it.
How do I reset my Wyze Plug?
To perform a factory reset on your Wyze Plug:
- Press and hold the on/off button on the side of the Plug until the status light begins to flash blue.
- Once the status light begins to flash blue, you can setup the Wyze Plug via the app again with the new WiFi network.
How do I use Wyze Plug in vacation mode?
Open the Wyze app and tap Wyze Plug.
To turn on Vacation Mode:
- Vacation Mode will remain enabled until you turn it off.
- Each Wyze Plug is limited to being turned on for between 5 and 60 minutes.
- Each plug with Vacation Mode enabled will turn on at least once per hour.
- Vacation Mode is has to be enabled on each plug.
How do I connect my WYZE plug to Alexa?
Link Alexa with your Wyze Account
- Open up the Wyze app, go into your Account settings, then tap on “Works With” to link Alexa to your Wyze account.
- You can also link your Wyze account by asking Alexa to Enable Wyze skill.
- Once enabled, follow the on-screen instructions to link your Wyze account to Alexa.
How do you power cycle a WYZE?
To power cycle your camera:
This can be done either from the power outlet, or from the camera itself. Allow 5-10 seconds to pass for the camera to completely discharge. Plug the camera back into the power source and allow it reinitialize.
Why does my WYZE camera say Cannot connect to local network?
Cannot connect to local network.
This can happen when the Wyze Cam is unable to acquire the IP from the router. It is most often due to an incorrect password or a special router setting. A quick troubleshooting method is to verify the password and restart your router.
Do WYZE plugs work with HomeKit?
The Wyze Plug also isn’t compatible with Apple HomeKit; if that’s important to you, check out the Wemo WiFi Smart Plug.
Does Google have a smart plug?
Geeni Smart Dot Wi-Fi Plug
Turn any lamp, appliance, or household device on or off from anywhere using your Geeni app or Hey Google.
How do I reconnect my WYZE thermostat?
Presents as: The thermostat is showing offline status in the Wyze app.
- Make sure your app is up to date.
- Force close your app.
- Power cycle the thermostat by turning the breaker off for about 30 seconds, and then turn it back on.
- Perform a factory reset, and then set it up again.
- Reboot your router.
Can the WYZE plug be used outdoors?
IP64 Rated Wyze Plug Outdoor is ready to face whatever Mother Nature throws at it. It can handle rain, wind, snow, and dust and operates from -4°F – 120°F. Wyze Plug Outdoor also has rubber outlet covers that can be used when the device doesn’t have anything plugged in to protect the hardware.
How do I connect my WYZE thermostat to a new WIFI?
Open the Wyze app back up and try to adjust the thermostat.
The setup process will be similar to when you first bought your thermostat:
- Go to thehome pageof the Wyze app.
- Tap the plus sign at the top left.
- Click Add Device.
- Follow the prompts to complete the setup process.
How do I connect my camera to Google home?
Step 3. Add your camera or doorbell to the Home app
- Open the Google Home app .
- Verify that the Google Account shown is the one linked to your speaker or display.
- Verify that the home listed is the one you want to pair your security camera to.
- At the top left, tap Add Set up device.
How do I cast my WYZE camera to chromecast?
How to view Wyze Cam on Chromecast
- Open your Google Home App and click the “+” sign.
- Click on the “+” to Set up a device.
- Choose the option that works with Google.
- Choose Wyze as the linked account.
- Enter the credentials to link to your Wyze Account.
- Add your Smart Device (Wyze Cam)
- Make sure the device is added.
Can WYZE plug turn on TV?
No, you cannot use a smart plug to turn on a TV. TVs today go into standby mode when they are turned off. Smart plugs work by cutting the power completely, so when you try to turn your TV on using a smart plug, the TV will only enter standby mode.
Contents