A: Go to Settings > Camera > Pairing. Press the number of the camera to pair, then press the pairing button on the camera within 30 seconds.
How do I connect my Uniden camera to my app?
If you are connecting wirelessly, from your device’s settings, go to WiFi. Select the Guardian App Cam 24 to connect your device to it. The camera listing will be HD-XXXXXX where XXXXXX are the last 6 digits on the camera label. Enter the default password, 12345678.
Why won’t my Uniden camera connect?
Make sure the camera is properly powered on. Make sure the WiFi router has enabled SSID broadcasting. The camera does not find the router to connect to Make sure you selected the correct router in your device WiFi setting. Make sure you entered the correct password for the router you selected.
How do I connect to Uniden WiFi?
You must have your router password.
- STEP 1 – SET UP CAMERA AND APP. Attach the stand to the camera.
- STEP 2 – CONNECT TO CAMERA’S WIFI APP.
- STEP 3 – CONNECT DEVICE TO ROUTER. Select the router you want the camera to use to connect to the internet and then enter the router’s password.
- STEP 4 – SAVE CAMERA ONTO NETWORK.
How do I connect my Uniden camera to my Iphone?
A: Go to Settings > Camera > Pairing. Press the number of the camera to pair, then press the pairing button on the camera within 30 seconds.
Why is my Uniden camera offline?
If the camera is still offline, there may be a problem with your home network. You can reset your home router and/or modem. A) Power off the camera (unplug the camera, or hold the button down for 5 seconds until the lights turn off; press it to turn it back on after about 1 minute.)
What is the default password for Uniden camera?
User By default, the user is admin. Password In the Password box, enter the password for admin.
How do I connect my Uniden baby monitor to WiFi?
To pair a device, tap the “Add Device” button or the “+” button on the top right-hand side of the screen if you already have shared access or a paired device. Once you have tapped the Add Device button, tap the Baby Monitor icon to set up the BW140R camera.
How do I set up my Uniden solo?
Search “AppCam Solo” in App Store (for iOS) download and install the app. Search “AppCam Solo” in Google Play (for Android), download and install the app. Please run App. Click the “Add New Device” button, and follow the instructions to set up the camera.
How do I connect my Uniden baby monitor?
Connect the USB power adaptor into a 240 volt AC (standard indoor) power outlet. Switch on the plug and allow the camera to power up. This can take up to a minute. When the camera starts flashing red, it is ready to be paired with your Wi-Fi network.
How do I reset my Uniden AppCam?
On the Devices Page, tap and choose to delete camera from the list. To rest the camera, use the provided reset needle to hold the reset button for 5 seconds. A voice prompt “ factory resets succeeds ” indicates the camera has been reset successfully. The field of view of Uniden Solo is 130° diagonally.
How do I get my camera back online?
Disconnect the Camera from the Power Source and Power Cycle it. The very first thing to try in order to get your camera back online is to disconnect it from the power source. Unplug the camera and let it sit for a few minutes and after a few minutes have passed, plug the camera back in.
Why is my WiFi camera not working?
Reboot the device. Rebooting your security camera will release its cache to flush, re-calibrate the settings, and revise connections. Directly unplug the security camera from its power supply then wait for a few seconds before plugging it again. This will reboot it.
Why does my IP camera lost connection?
Surveillance Station may lose connection to your camera when the Internet connection is poor or if changes are made to bandwidth, firewall, or IP address settings.
What DVR is compatible with Uniden camera?
Uniden has 3 series of wired DVR/NVR. UDVR/UNVR series and the Guardian B & G series. Download the firmware to a USB2. 0 compatible flash drive.
Compatible systems:
- UDVR45x4, UDVR85x4, UDVR85x8.
- Guardian G6 Series.
- Guardian G7 Series.
How do I update my Uniden Guardian firmware?
- Download the firmware to your computer.
- Insert a USB flash drive into the “rear” USB2. 0 slot of the DVR or the front USB port.
- Unplug the mouse from the back of the DVR during the update process.
- Shut down the DVR.
- Unplug the power from the DVR.
- The screen should say “Updating” instead of the Uniden logo.
What is Uniden app dock?
App Dock for the BW 31xx Series of Uniden Baby Watch Products – Allows your Baby Monitor to have remote access through an App on the Smartphone. App Dock for the BW 31xx Series of Uniden Baby Watch Products – Allows your Baby Monitor to have remote access through an App on the Smartphone.
How do I find my Uniden baby monitor password?
If you forgotten the password, please press and hold the reset button at the back of the App Dock for 5 seconds. Tap on the Advanced Setting option to display the Advanced Setting screen below. Tap on the Change Password option to key in and confirm the new password.
How do I charge my Uniden solo battery?
The Battery can be charged via a power outlet or Uniden App Cam Solo Solar Panel.
Contents