How Do I Connect My Smartcam To Wi-Fi?

How do I reset my Smart Camera WiFi?

Press and hold the Reset button located on the back side of the camera for 15 seconds, and then release the button. The camera will make a “click” sound and then the status LED will blink green, indicating the camera was reset.

How do I setup my smart camera?

How to set up a smart home security camera

1. Download the appropriate app on your phone.
2. Create an account if you don’t have one already.
3. Connect the power supply to the camera and wait for it to be ready to set up.
4. Use the ‘add camera’ option in the app and follow the instructions.

Why won’t my security camera connect to my WiFi?

If the connection is poor, if possible, reduce the distance between the camera and your Wi-Fi router. Consider a wired installation or consult your internet provider for solutions. If the camera is online you can check the Wi-Fi strength in the app. Go to ‘Options’ in the list view of the camera.

What is Smartcam password?

Next. Ready. Register a product in use > Register using cables. » The LED is yellow Press the home button and access the Wi-Fi Settings. Turn on Wi-Fi and select the last 4 digits of the product’s serial#. Enter “smartcam” for the password.

Why won’t my IP camera connect?

Make Sure There Is No Signal Interference. If there is a bad reach, the IP camera can’t find your WiFi signal, and it cannot connect to the WiFi. The IP camera should not be too far from the router. Check the distance between the IP camera and the router.

How do I add SmartCam to SmartThings?

From the Home screen in the SmartThings app, tap the Menu (three horizontal lines) icon, and select Devices. Tap the + (plus) icon from the top right corner, and then tap SmartThings > Camera > SmartThings Cam.

Why isn’t my camera working on my Samsung phone?

Restart the phone. If restarting doesn’t work, clear the cache and data of the camera app by Settings > Applications > Application manager > Camera app. Then tap Force Stop, and go to the Storage menu, where you select Clear Data and Clear Cache.

How do I change WiFi on SmartThings?

In the SmartThings app:

1. Make sure the SmartThings Hub is plugged in, powered up and also plugged into a router or switch for internet connectivity.
2. On your device touch [Menu] in the top left hand corner of your screen.
3. Touch the [Settings Gear] icon.
4. Touch [Update Wi-Fi] Information.

What app can I use for my WiFi camera?

The Best IP Camera Apps for Android

1. tinyCAM Monitor. Features. 2-way audio on selected models. Motion detection (both in-app and on-camera), face detection.
2. IP Cam Viewer Pro. Features. 1600+ devices supported including NVRs and DVRs.
3. ONVIF IP Camera Monitor (Onvifer) Features. Supports ONVIF, RTSP/MJPEG/H.264.

How do I connect my Wi-Fi camera to my phone?

(This can be done by going to the settings in your Android phone and turning on the “hotspot” function—usually called “mobile hotspot” or “portable hotspot”. Set a password for the hotspot connection.) Connect the camera to the Android phone’s hotspot-enabled Wi-Fi network.

How can I get WiFi camera on my phone?

Follow the steps below to connect to an IP Camera using your mobile phone: 1. Open the internet browser of your smartphone. 2.

How do I know my WiFi IP address?

Find your IP address in Windows

1. Select Start > Settings > Network & internet > Wi-Fi and then select the Wi-Fi network you’re connected to.
2. Under Properties, look for your IP address listed next to IPv4 address.

How can I access my security cameras remotely over the Internet?

How to view your IP camera remotely via a web browser

1. Find your camera’s IP address.
2. Open a web browser and type the IP address.
3. Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.
4. After you change the port, you will need to reboot the camera in order to save the changes.

Can’t connect to my 2.4 GHz WiFi?

If your WiFi network name or SSID doesn’t indicate whether it’s 2.4 GHz or 5 GHz: Try opening your router settings, and look for a 2.4 GHz WiFi network that your mobile device can connect to.Contact your Internet Service Provider (ISP), and ask for help connecting your mobile device to a 2.4 GHz WiFi network.

How do WiFi cameras work?

Wireless cameras work by transmitting the camera’s video through a radio (RF) transmitter. The video is sent to a receiver that is connected to a built-in storage device or through cloud storage. Through your monitor or receiver, you’ll have an easy link to access all of your image or video clips.wireless technology.

How do I connect my IP camera to my new WiFi?

Select Obtain an IP address automatically (DHCP) and Obtain DNS server addresses automatically. Click OK and the camera will start to connect to the router wirelessly. Go to SETTING->BASIC->Initialize, then Click Reboot button to reboot this IP Camera. A confirmation dialogue will appear and then click OK to process.

How do I change my SmartCam app password?

2

1. On the Top Menu Bar click My Account.
2. In the My Account Details section, click Change My Password. Enter your old password. Enter your new password. Enter your new password again.
3. Click Change.

How do I download videos from my Samsung SmartCam?

Downloading the video footage

1. Remove the microSD card from your camera.
2. Insert it into your adapter / reader (depending on what you have)
3. Insert it into your computer.
4. Select the video footage based on date or all of it if you so please.
5. Upload to YouTube, to Vine, to your phone, or wherever you like.

Why is my Samsung SmartCam flashing blue?

You can Do a Foogle search for the Samsung Smartcam manual and on page seven it indicates that a blue blinking LED indicates that you are connecting to the network and a solid blue indicates you have been successful in making a connection. 1 of 1 found this helpful.

Can’t connect to SmartThings?

SmartThings Does Not Connect or Discover LAN Wi-Fi Devices

1. Make sure both devices are connected to the same local network.
2. Check if the device has a native app.
3. Restart the device, the SmartThings app, and your phone.
4. Connect the LAN device directly to the router.
5. Reboot the router.