How Do I Connect My Smart Kettle?

Or you can simply search for Smarter in the Google Play or iTunes store.

1. Create a Smarter account – Please use an active email address.
2. Tap the kettle icon then select “Setup”
3. Plug in your iKettle and tap next.
4. Ensure you are connected to your home network and press “next”
5. Go into your wifi settings on your device.

How do I connect my smarter kettle to Alexa?

To set up, please follow these steps:

1. Open the Alexa app.
2. Search Smarter in the Alexa app skill search.
3. Select the “Smarter iKettle 3.0” to open the skill.
4. Select “Enable”
5. The app will now prompt you to link your Smarter account.
6. Please login with your details.
7. Alexa will search for the devices connected in your Smarter app.

Why wont my iKettle connect?

1) Press and hold down the button on the base for 10 seconds until you hear three beeps. 2) Unplug the base, wait 10 seconds and plug it back in. 3) Delete and reinstall the app from your device.5) Turn your WIFI off for a few seconds and then on again, to refresh the connection.

How do you reset an app kettle?

To reset the kettle please remove the kettle body from the base, hold the button on the base in until you hear three beeps, unplug for about 10 seconds then plug back in. Now you can set up your iKettle 3rd generation!

How can I reconnect my WIFI?

See whether the connection works.
Add the Wi-Fi network again

1. Open your phone’s Settings app.
2. Tap Network & internet. Internet.
3. At the end of the list, tap Add network.
4. If needed, enter the network name (SSID) and other security details.
5. Tap Save. If needed, enter a password.

How do you use Kogan smart kettle?

Press button and cycle through the following temperatures: 40°C, 50°C, 60°C, 80°C, 90°C; then press the button to begin boiling. b. Once the water reaches 100°C, the blue LED light will turn off, and the kettle will display the current temperature.

How do I set up iKettle 3rd generation?

To setup your iKettle 3rd generation, you will need to place your phone directly on the connection light to BlinkUp your iKettle to your home network. The connection light on your iKettle 3rd generation will flash for 60 seconds once plugged in.

How do I add users to iKettle?

All your friend needs to do is download the Smarter app and create an account. You will then go into your network and select add user, a pop-up will appear asking you to enter their account email, the app will generate a share link then give you the option to email them the link.

Why is my app kettle not working?

The solution is to switch the kettle off at the wall plug, wait a few seconds, then power it up again. That is, get it to reset itself.

Why have I lost my Wi-Fi connection?

it could be an issue on your ISPs side. A faulty router, modem or internet adapter. it could be a hardware or a software issue on your side. or simply – the issue could be network congestion.

Why does my Wi-Fi not connect?

If your Android phone won’t connect to Wi-Fi, you should first make sure that your phone isn’t on Airplane Mode, and that Wi-Fi is enabled on your phone. If your Android phone claims it’s connected to Wi-Fi but nothing will load, you can try forgetting the Wi-Fi network and then connecting to it again.

Can’t connect to Wi-Fi even with correct password?

Make sure you select the correct wireless security option when asked for your password (for example, select WEP 40/128-bit Key if you’re typing the 40-character pass key for a WEP-encrypted connection).Try turning the card off and then on again to reset it — see Wireless network troubleshooter for more information.

How do I pair my Kogan smart heater?

Power the SmarterHome™ device on and follow the product-specific instructions to enter the Wi-Fi-connect mode. The heater will enter pairing mode automatically when turned on. If it is not, then you can power it off and on again or press and hold the mode button for approximately 5 seconds to reset it.

How do I clean my Kogan smart kettle?

Remove the power cord and allow the kettle to cool down. Wipe up the outside of bottom cover with a damp cloth, and then dry it with a dry cloth. Do not use abrasive cleaners, otherwise it will scratch the body. Soap water and mild cleaning agents can be used.

What does boil the kettle mean?

2 verb When you boil a kettle or pan, or put it on to boil, you heat the water inside it until it boils. He had nothing to do but boil the kettle and make the tea…

How do I manually use AppKettle?

Setup is a simple process. Just plugin in the base, set the kettle on top and put on the lid. Once you’ve download the free smartphone app (iOS or Android) it will walk you through the usual process of giving your WiFi password which it then in turn passes on to the Kettle to join your wireless LAN.

What has happened to AppKettle?

The company website has disappeared completely and so has their Facebook page, all that remains is the company’s Twitter account which hasn’t had a tweet since 2019.

How do you calibrate an app kettle?

Water level in app is is not accurate. What do I do?

1. Select the box that says “water” on the kettles home page.
2. Select “calibrate”
3. A pop up will appear asking you to remove the kettle body from the base.
4. Then select “calibrate”