How Do I Connect My Magic Home To Home Assistant?

Configuration

1. Browse to your Home Assistant instance.
2. In the sidebar click on Configuration.
3. From the configuration menu select: Integrations.
4. In the bottom right, click on the Add Integration button.
5. From the list, search and select “Flux LED/MagicHome”.
6. Follow the instruction on screen to complete the set up.

Does Magic home work with home assistant?

Basically, everything you can do within the MagicHome app can be done directly within Home Assistant.According to the integration doc, as long as you can control your bulb or lightstrip via the MagicHome app, you should be able to add it to Home Assistant.

How does wifi LED controller work?

How do you wire a Wifi LED control system? A wireless lighting control system has a dimming module which is installed in a junction box such as a switch/sensor. The sensors have a wireless transmitter which sends signals to receivers that are located in gateways after which they are sent to a particular server.

Where is configuration Yaml in Hassio?

If you use Home Assistant Core, you can find configuration. yaml in the config folder passed to the hass command (default is ~/. homeassistant ).

How do I add a device to Magic home?

How to connect Smart Device to my home network?

1. Install the App? Search for “Magic Home Pro” on the App Store or Google Play Store, or scan the qr code below to download it.
2. ( Important) connect your phone to home wifi network(2.4GHz WiFi only)
3. Power on the device.

How do you connect Magic home lights to WiFi?

Plug your power source into the wall and then plug your light into the control box.

1. Download APP.
2. Wi-Fi mode:
3. Remote control via Internet:
4. 1.Create your Magic Home cloud account.
5. 2.Add your strip light and modify the name.
6. Enable Alexa Skill.
7. 4.Login and Discover Devices.
8. 1.Create your Magic Home cloud account.

What is Wled home assistant?

WLED is a fast and feature-rich implementation of an ESP8266/ESP32 webserver to control NeoPixel (WS2812B, WS2811, SK6812, APA102, and similar) LED’s. While Home Assistant supports WLED 0.8. 4 and higher, the use of WLED 0.10 and newer is recommended to get the optimal experience.

What is home assistant Hacs?

HACS is an abbreviation of “Home Assistant Community Store”. Although “Store” is not “technically” correct since nothing is sold, it’s more like a marketplace? but “HACM” didn’t have the same ring to it. HACS is a component that gives the user a powerful UI to handle downloads of custom needs.

How do I reset my magic home LED controller?

Do not connect to a 5G network as bulb will be unable to connect and then you will have to reset it. To reset a bulb you switch it on and off four times and leave it on about one to two seconds each time. After the fourth time the bulb will strobe. After strobing is done turn off and turn back on.

How do I reset my magic home controller?

You have to turn your power (light switch that controls your bulb) OFF & ON 4 times (wait about 3-5 seconds each time you power OFF & ON….don’t just flick your light switch OFF & ON super fast). At the End of the 4th time when you turn in the bulb, your bulb quickly flash for about 20 seconds then your bulb is reset.

How do I find my Home Assistant IP address?

You can find the IP address by logging into your router (typically by typing 192.168. 1.1 into the address bar of your browser), finding your Pi (should be named hassio).

How do I find my config Home Assistant?

You can verify that your changes are acceptable by running a configuration check. Do this by clicking on Configuration in the sidebar, click on “Server Controls” and click on the “CHECK configuration” button. When it’s valid, it will show the text “Configuration valid!”.

How do I connect to a smart device?

1. Pairing (Bluetooth) Pair with or connect to smart devices using Bluetooth.
2. Select to Send (Bluetooth) Select pictures for upload to a smart device or choose whether to mark pictures for upload as they are taken.
3. Wi-Fi Connection. Connect to smart devices via Wi-Fi.
4. Send While Off.

How do I connect my LED lights to my phone?

How to Use Smart LED Strip Lights with EZ Mode

1. Step 1: Download LampUX App. Android and iOS users can go to the App store and download LampUX App on your phone, then register an account.
2. Step 2: Set Up the Smart LED Light Strip. Turn on the LED strip lights and wait for 10 seconds.
3. Step 3: Connect the App.

How do I connect my magic home LED lights to Alexa?

Connecting your MagicHome device to Alexa

1. Setup the light or controller with the magic home app.
2. Set up the cloud account and enable “Remote Access.”
3. In the Alexa, app click “discover devices.”
4. Select your device.
5. Lights can now be operated via voice control.

How do I connect to 2.4 GHz WiFi?

To connect your Android device to a 2.4 GHz network:

1. Unlock your device and tap the Settings app.
2. Tap Network & Internet > Wi-Fi.
3. Enable WiFi by tapping Use WiFi at the top.
4. Select a 2.4 GHz WiFi network.
5. If prompted, enter the password for the network.

Why won’t my smart lights connect to Google home?

If the Google Home app can’t find your bulb or plug during set up. Turn the device off for 10 seconds then turn it back on. Make sure you have the latest version of the Google Home app. Reboot your speaker or display.