How Do I Connect My Lutron To Wifi?

Tap on the Lutron Connect app in the search results. Tap on the Install button and then choose to Accept the access request. The Lutron Connect app will then begin to download onto the device. Make sure that the mobile device is connected to the local Wi-Fi network that the Lutron Connect Bridge resides on.

How do I connect my Lutron bridge to my router?

Connect the bridge to the router
Using an ethernet cable connect your Lutron Smart Bridge to an open LAN port on your router. If you do not have an open port, you can add additional ethernet connections by purchasing an unmanaged ethernet switch and plugging that into your router.

How do I connect my Lutron to a new Wi-Fi?

1. Make sure your Smart Bridge is connected to the new router.
2. Connect the ethernet cable from the bridge directly to a LAN port on the new router.
3. Re-set your router by cycling power off for 10 seconds and then turn it back on.
4. Re-set your Smart Bridge by cycling power off for 10 seconds and then turn it back on.

Can I use Lutron without bridge?

Do I need to have a Smart Bridge to use Cas?ta products? Cas?ta dimmers & switches are able to communicate directly to Lutron Pico remotes and do not require a bridge or wifi to function.

What is Lutron Clear Connect?

Clear Connect RF technology is Lutron’s latest advancement of our highly reliable RF technology that ensures seamless communication between our system components.A dedicated network ensures communication between systems devices are reliably delivered and group commands ensure a smooth, simultaneous system response.

How do I find my Lutron IP address?

The Lutron App will walk you through the initial system setup and adding devices. The integration report and IP address settings are found in the Settings ->Advanced menu of the app. Tap the icon in upper left corner to access the Settings menu.

How do I reset my Lutron Connect bridge?

Step 1: Quickly triple tap and hold any button on the keypad. DO NOT release after third tap. Step 2: Keep the button pressed after the third tap for a few seconds until all the status LEDs start to flash slowly (approximately once per second). The keypad has now been returned to Factory Default Settings.

How do I connect my Lutron Caseta hub?

This is pretty easy. Just take the included power and ethernet cables and connect them to the hub. After that, plug the power into a free outlet and the ethernet into an open ethernet port on your router. From there, lights will begin to blink on the hub to let you know it’s ready for use.

How do I add Lutron to my home assistant?

Configuration

1. Browse to your Home Assistant instance.
2. In the sidebar click on Configuration.
3. From the configuration menu select: Integrations.
4. In the bottom right, click on the Add Integration button.
5. From the list, search and select “Lutron Cas?ta”.
6. Follow the instruction on screen to complete the set up.

How do I connect Lutron to Apple HomeKit?

Set Up

1. Download the newest version of the Apple iOS Lutron app.
2. Go into Settings on the Lutron app.
3. Click on “HomeKit & Siri”
4. Click on “Add Home”
5. Enter the code on the bottom of your Smart Bridge.
6. Go back to Settings on the Lutron app.
7. Click on “HomeKit & Siri”
8. Click on “Rooms”

Does Lutron Caseta use WIFI?

Since Cas?ta Wireless uses Clear Connect wireless technology, the system does not use up any Wi-Fi bandwidth and will not affect the general internet performance in your home. How does the Lutron App connect to the Smart Bridge?

How do I connect my Lutron to my phone?

Tap on the Lutron Connect app in the search results. Tap on the Install button and then choose to Accept the access request. The Lutron Connect app will then begin to download onto the device. Make sure that the mobile device is connected to the local Wi-Fi network that the Lutron Connect Bridge resides on.

How do I connect my SmartThings to Lutron?

Setup

1. Plug in the Smart Bridge and connect it to the router.
2. Download the Lutron app and follow the direction.
3. Set up your Samsung SmartThings system and SmartThings app.
4. Once both apps are setup, follow Samsung’s instructions to integrate the Cas?ta devices to SamrtThings. For steps in their app, click here .

How many Lutron bridges do I need?

While the Lutron app can only connect to one Bridge at a time, any HomeKit app can connect to any amount of Bridges simultaneously. So while you will need the Lutron app to setup your devices, you do not need it to control your devices. I strongly recommend producing a Caseta Smart Bridge Extender/repeater.

Does Caseta use ZigBee?

Lutron Caseta does not use Z-Wave or ZigBee, but instead uses their own patented, proprietary wireless protocol which they call Clear Connect.

How does Caseta communicate?

The system communicates using the proprietary Lutron Clear Connect protocol. Clear Connect is a wireless technology that works in the low-use 434 MHz frequency band to communicate with individual control devices. It also uses Wi-Fi to connect to other systems, like Nest.You can only extend the range once per system.

How do I reset my Lutron app?

You can do a ‘reset’ of sorts, which is similar to most Lutron products. The BLACK button on the back – you can perform the standard 3-press-hold-3-press reset. I have had success with this method after speaking with Lutron regarding a few issues we were having.

How do you reset Lutron homework?

Reset Factory Default performs the same function as a triple-tap, hold, triple-tap (see page 6). To access the Maintenance screen, hold the ON and OFF buttons down simultaneously for 10 seconds, then release. Restoring the Dynamic Keypad to factory settings will remove it from the system and will clear its programming.