How do I sync my Lutron Pico remote?
Press and hold the “Off” button on the dimmer/switch you wish to pair the Pico remote to for 6 seconds until the green indicator lights on the unit begin to flash, then release. This will place the device in pairing mode.
How do I reset my pico remote?
Pico Wireless Controller 3rd Generation (PJ2-)
Step 1: Quickly triple tap and hold the bottom button on the Pico control. DO NOT release after third tap. Step 2: Keep the button pressed after the third tap for six seconds. The Pico control has now been returned to Factory Default Settings.
How do I sync my remote to my hue?
Pull the plastic tab out of the remote to turn it on. If you don’t have a Hue Bridge, point the remote directly at each light you want to pair and press and hold the “on” button until the LED light turns green and is paired to the bulb (repeat for any other bulbs you have).
Why is my remote not connecting?
Clean the remote control terminals. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.
How do I connect my Lutron switch to my hub?
This is pretty easy. Just take the included power and ethernet cables and connect them to the hub. After that, plug the power into a free outlet and the ethernet into an open ethernet port on your router. From there, lights will begin to blink on the hub to let you know it’s ready for use.
How do I pair my Somfy remote with shade?
Press and hold the motor head button until the blinds briefly moves Up and Down. Release the button once complete. Briefly press the motor head button, the blind will briefly move Up and Down twice. Motor is in sleeping mode.
How do I pair my Lutron connected bulb remote?
Pair. Tap the ‘Next’ button until you see the green button labeled ‘Connect Now’. Press this button and then press and hold the top button of the Remote until the light turns off, which will take about 6 seconds. You may change the name of your Remote after it has paired to the Hub.
Why can’t I connect to my Lutron?
All Users: If you are still unable to connect, we recommend that you reset your router by disconnecting the power for 10 seconds. This will restart the bridge. If the Lutron App is still unable to find the bridge, this is most likely because the Bridge and your smart device are not connected to the same network.
How do I pair my Xfinity remote?
- Turn on your TV.
- Press and hold the xfinity and Mute buttons together for five seconds until the light at the top changes from red to green.
- Type the first five-digit code for the TV manufacturer. If the remote light blinks green twice, the code is correct.
- Aim the remote at the TV, and press the Power button.
How do I reset my Xfinity remote control?
Factory Reset the Xfinity Voice Remote with a Setup Button (XR11)
- Press the Setup button until the LED at the top of the remote changes from red to green.
- Press 9-8-1.
- The LED will blink green twice to indicate that the remote was reset.
How do I program my Xfinity x1 remote?
Press and hold the xfinity and Info buttons for five seconds. Wait for the Voice Remote light to change from red to green. Follow the instructions by entering the three-digit, on-screen pairing code. Once the on-screen pairing code is correctly entered, your Voice Remote is paired with the TV Box.
How do I reset my Sony remote control?
How to reset the remote control.
- On the remote control , remove the batteries .
- Press and release each button on the remote control two times.
- Install new alkaline batteries.
- Replace the battery cover .
- Ensure there are no obstructions between the satellite receiver and the remote control .
How do I pair my Sony TV remote?
How to pair a remote control with Sony’s Android TV via Bluetooth
- Press the [HOME] button, select [Settings]
- Select [Voice Remote Control] and press the [Activate button]
- Prepare Voice Remote Control.
- Press and hold down VOL- button.
- Press and hold the [Activate button] for 3 seconds while holding down VOL- button.
How do I pair my Sony Bravia remote?
Pair the remote control with the TV.
- Press the HOME button.
- Select Settings ? Network & Accessories ? Touchpad Remote Control or Voice Remote Control.
- Select Pair Touchpad Remote Control or Activate the MIC button.
- Follow the on-screen instructions.
Contents