How Do I Connect My Kuna To Wifi?

To change the Wi-Fi network that your Kuna device is connected to, simply select “Change Wi-Fi Network” on your camera settings page in the Kuna App.

Why does my KUNA camera keep going offline?

If you find that your device is going offline frequently, this may be caused by a weak Wi-Fi signal. You can usually improve your device’s performance by moving your router closer to it, or adding a Wi-Fi extender.

How do you pair Kuna?

When you open the Kuna mobile app, you will see the Devices tab and a thumbnail from the live view of your Camera Porch Light. To pair your Companion Light with your Camera Porch Light, click the Add Device button on the top right-hand corner of the screen. Clicking the Add Device button will show your device options.

Do KUNA cameras work without WiFi?

You Are On a Non-Standard Wi-Fi Channel
Currently, Kuna Powered Devices (except for the doorbell) can only operate on 2.4 GHz 802.11b/g Wi-Fi signals. The available channels on this frequency are 1 – 14.

Why is my KUNA light blinking green?

The LED will turn flashing green when the Camera Floodlight connects to your local WiFi network.

Why is my camera not connecting to WiFi?

Forget all WiFi networks, restart your phone/tablet, then reconnect to your 2.4 GHz network. On iOS: In the Settings app, tap General > Reset > Reset Network Settings. On Android: In the Settings app, tap General management or System, tap Reset or Reset Options > Reset Network Settings. Confirm the reset.

Why wont my surveillance camera connect to WiFi?

Make Sure There Is No Signal Interference. If there is a bad reach, the IP camera can‘t find your WiFi signal, and it cannot connect to the WiFi. The IP camera should not be too far from the router. Check the distance between the IP camera and the router.

How do I reset my KUNA doorbell?

If the doorbell does not power up: please try resetting the doorbell again by disconnecting the unit from power and holding down the reset button on the back for 15 seconds using a pen or paper clip.

What is Kuna Bluetooth?

Kuna is an app-based home security platform that powers a range of DIY smart devices like outdoor cameras, lights and motion sensors so they fit seamlessly into your home.Devices talk to Kuna. Connect a variety of devices with your app and cover every angle.

How do I update my KUNA app?

Just leave it powered on overnight it will get the latest software for itself. You can also manually update your firmware by tapping on the small gear icon in the camera thumbnail (on the Devices Page) and selecting Device Health. Then, scroll to the bottom of the page and tap the Update Firmware button.

Is Kuna and Maximus the same?

The Maximus Smart Security brand was owned and managed by our global manufacturing partner, Maximus Lighting. As of Summer 2021, Kuna has taken over this part of the business. Future products will be sold under the Kuna brand.

How do you add Kuna to Alexa?

Open the Alexa mobile app and login using your Amazon account email address and password.

1. Tap on the Menu icon, and click Skills.
2. Search for “Kuna” in the Skills section and click “Enable Skill”.
3. Next, you’ll be prompted to sign in with your Kuna account email address and password.

What does a blue light on a security camera mean?

A flashing blue light on a security camera means you are ready for the WiFi protected setup. To enter the WiFi protected setup mode, push the WiFi protected setup button and release it when the light begins flashing blue (about three seconds).

What does a red light on a security camera mean?

Security Cameras have small Red Lights (sometimes Other Colors) to indicate that there is a recording in progress. For cameras that are constantly on, that light will also be on 24/7. For other Cameras, like the Blink, the light will only come on when motion is detected and a clip is recorded.

How do you install a Kuna security light?

Camera Porch Light Installation Guide

1. Step 1 – Disconnect Power and Adjust Bracket.
2. Step 2 – Fasten Bracket to Junction Box.
3. Step 3 – Adjust and Tighten Screws.
4. Step 4 – Suspend Light with Holding Hook.
5. Step 5 – Connect the Wires.
6. Step 6 – Align Fixture Screws.
7. Step 7 – Install Bulb and Reconnect Power.

How do I connect my camera to my WiFi network?

Digital Camera WiFi Connection

1. Press the Home or Menu button on your camera.
2. Open Settings, then WiFi Setup or WiFi Options, if applicable.
3. Make sure your camera’s WiFi connection is turned on.
4. Your camera may automatically connect to your WiFi network.
5. Enter your WiFi network’s password.

How do I change from 2.4 GHz to 5ghz?

To connect your Android device to a 2.4 GHz network:

1. Unlock your device and tap the Settings app.
2. Tap Network & Internet > Wi-Fi.
3. Enable WiFi by tapping Use WiFi at the top.
4. Select a 2.4 GHz WiFi network.
5. If prompted, enter the password for the network.

What is my IP address for my router?

To find your router’s IP address, type cmd in the Windows search bar and press Enter to open the command prompt. Type ipconfig in the command prompt and press Enter to run the command. Scroll through the information until you see a setting for Default Gateway under Ethernet adapter or Wireless LAN adapter.

How can I access my security cameras remotely over the Internet?

How to view your IP camera remotely via a web browser

1. Find your camera’s IP address.
2. Open a web browser and type the IP address.
3. Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.
4. After you change the port, you will need to reboot the camera in order to save the changes.

What is the kuna app?

Centralized on your mobile device, Kuna is a robust home security app that lets you control your security lights, cameras and sensors from your android or apple device. No more batteries, flimsy timer switches or obtrusive extension cords—just peace of mind. So you can react wherever you are, as it happens.

How do I turn off my KUNA camera?

If your companion light is correctly synced with your Camera Porch Light, both Status LEDs should turn off together. However, you can also turn off your companion LED manually. To do this, please insert a small pin or toothpick into the hole opposite your status LED and click the small button in there just once.