You need to connect to the Kasa Cam’s Wi-Fi network manually, please go to Settings->Wi-Fi on your smartphone and manually connect to Kasa Cam’s Wi-Fi network (which is named Kasa_Cam_xxxx), and then go back to the Kasa app to continue the setup process.
How do I change my Wi-Fi on my Kasa camera?
Unfortunately, there is no straightforward way to change the Wi-Fi on a Kasa smart plug from within the app. To change the Wi-Fi, you‘ll need to perform a factory reset on the device and then set it up again as if it were a brand new device.
Why is my Kasa camera not connecting to Wi-Fi?
Check the system LED status of the Kasa Cam and make sure it’s flashing orange and green. Otherwise, reset the device as per QIG/UG. iOS: Go to the Settings page, click on the Wi-Fi option to connect to the Kasa Cam’s Wi-Fi manually. Android: Go to the Settings page to connect to the Kasa Cam’s Wi-Fi network.
How do I connect my TP-Link camera to a new Wi-Fi?
How to set up cloud camera with tpCamera APP?
- Connect your camera to your router by an Ethernet cable, then connect the phone to the Wi-Fi network of same router.
- Log in the tpCamera app with your cloud account, choose + to add a new device.
- You need to choose the model number of your camera before adding it.
Does Kasa camera need Wi-Fi?
The Kasa Cam can be installed and used anywhere you have a wireless Internet connection.
How do I reconnect my Kasa smart bulb to WIFI?
You need to connect Smart Bulb’s Wi-Fi manually, please go to Settings->Wi-Fi on your smart phone and manually connect to smart bulb’s Wi-Fi network (which named as TP-LINK_Smart Bulb_xxxx), and then go back to the Kasa APP to continue the setup process. d. Connect your Smart Bulb to your home network.
How do I reconnect my Kasa Smart Switch?
Press RESTART button and reboot the Smart Switch. The Wi-Fi status LED will be amber and turns to be blinking green until successful reconnection. 2. Press RESET button and hold (about 5 seconds) until the Wi-Fi status LED blinks amber and green alternately to initiate App-Config mode.
How do I reset my Kasa camera?
Press and hold the RESET button for at least 15 seconds until the LED blinks amber quickly. While the camera is powered on, press and hold the sync button on the back of the camera for at least 15 seconds until the LED blinks amber quickly. The camera will reset and reboot.
How do I find my Kasa smart plug?
Connect Kasa device to Amazon Alexa:
- Open Amazon Alexa App, tap on “Home” icon in bottom right corner.
- Select “Kasa Smart” and tap on “Continue”.
- Tap on “ENABLE TO USE”, type in your Kasa account and password, and then click “Authorize”.
- Tap on “DISCOVER DEVICES” or use voice command “Alexa, discover devices”.
Why is my Kasa blinking red and green?
A solid red indicates no network connection, or that the App-Config process has failed.Wi-Fi Blinking Amber and Green: App-Config mode initiated. Quick Blinking Green: Connecting to the network. Solid Green: Connected to the network.
How do I connect my TP Link camera?
On a desktop or laptop which is connected to the same wireless router, open Intelligent IP Installer (you can find it in the Resource CD) and then highlight your camera. Click Link to IE button, IE will automatically started and the login window will be prompted.
How do I view my Kasa camera?
Launch the Kasa Smart app. When you launch the app, it will show all your smart home devices including your cameras. From this view you can turn the cameras on or off by tapping the toggle buttons on the right side. To view the cameras only, go to the Cameras tab.
Why is my smart bulb not connecting?
Make sure the Wi-Fi network is a 2.4 GHz network. The Smart Wi-Fi Light will not connect to a 5 GHz network. If your Smart Wi-Fi Light is already on the right frequency, make sure that your phone is not using a VPN app in the background.The Wi-Fi connection may not have good coverage during set up.
How do I reset my Kasa WIFI?
Press and hold the reset button for 5 seconds or until the Wi-Fi LED blinks amber and green to initiate the app-config process. To reset the smart switch/plug to factory defaults: Press and hold the reset button until the Wi-Fi LED blinks amber rapidly (about 10 seconds) to reset the Smart switch to factory defaults.
How do I connect my Smart Life app to WIFI?
Download & register an account on the Smart Life or Tuya App. Open app then select +. Now follow the instructions on the app. Enter your WIFI credentials to connect to your home network.
How do I reset my Legrand WIFI switch?
Press and hold the device for 10 seconds. See attachment for instructions as to where to press and hold on each device. The locator light will flash amber when the device has been reset.
How do I connect my tp link nc450 to WiFi?
Press the WPS or QSS button on your router. Within 2 minutes, press the WPS/Reset button on the back of the camera for about 2 seconds, then the LED above this button will start flashing quickly. When this LED becomes solid on, the WPS is successful and the camera is connected to the router wirelessly.
How do I use Kasa plug with Alexa?
About Alexa
- Launch the Alexa app on your mobile device.
- Go to Devices in the bottom right.
- Tap the plus sign in the top right to add a new device.
- Select Add Device from the pop-up menu.
- Select the Kasa Smart brand.
- Tap Continue.
- Tap Enable to Use to activate the TP-Link Kasa skill for Alexa.
Why is my Kasa plug blinking blue and orange?
Flashing amber and blue: Configuring. Flashing blue rapidly: Connecting to the network. Solid blue: Connected to the network. Flashing amber rapidly: Factory resetting.
How do I reconnect my Kasa device?
Step 1 With your camera plugged in, remove the back cover. Step 2 Using a paperclip to press and hold the reset button for 5 seconds. Step 3 Wait till the LED is blinking amber and green, then launch the Kasa App and click on Add device. Step 4 tap Choose from Pre-configured Devices.
Contents