How Do I Connect My Dahua Dvr To Wifi Without Cable?

Posted on by

Step by Step Instructions

  1. Plug in the USB Wifi Adapter.
  2. The WiFi interface will appear.
  3. A list of discovered wireless networks will appear.
  4. Select the Verification and Encryption type of the WiFi network using the dropdown boxes.
  5. Click the field next to ‘Input Password’ and enter the password for the network.

Can a DVR use a WiFi dongle?

In order for the DVR to communicate with an internet connection so that the DVR interface can be viewed online or from a smartphone, the DVR must be connected to a router.Other WiFi adapters will not work because your DVR is not capable of downloading the necessary drivers that other WiFi adapters need.

How can I connect my phone to Dahua DVR online?

How to set up the Dahua DVR on a mobile phone

  1. Download and install the gDMSS App on your mobile phone;
  2. Open the App and go to the “Device Manager” menu;
  3. Click the add (+) button;
  4. Choose the type of device you are using;
  5. Select the type of connection;
  6. Insert the camera information;
  7. Press “Start Live Preview”;

How do I connect NVR to wireless router?

To connect using WPS, power the NVR up without the Ethernet cable attached, then on your router press the WPS button for the specified time, (check your router for this) usually five seconds, then press the WPS button on the rear of the NVR for 2-4 seconds. Leave the NVR for a few moments and it should connect.

How do I connect my Dahua DVR to the Internet?

Step by Step Instructions

  1. Connect the NVR and IP Camera directly to your router or modem with a CAT5 cable.
  2. Open the ConfigTool and locate your NVR and IP Camera.
  3. Login to both using Internet Explorer.
  4. On the NVR, go to Settings->Network->WiFi Device Manage.
  5. On the IP Camera, go to Setup->Network->WiFi.

How can I connect my DVR to my laptop for internet?

Open up your Internet Browser and type in the new Static IP Address of the DVR in the address bar and press enter. The Web UI will be revealed. You may need to install the plugins and allow them to use this feature. After the plugins are installed on your computer allow the plugins to be run on this website.

See also  Which Is Best Quad Or Triple Camera?

Why is my DVR not connected to network?

In the DVR / NVR Network menu, ensure your system is set to DHCP instead of Static. Restore the Network settings to default in the Network menu in your DVR / NVR. Ensure your subnet mask is not set to 0.If you are using a network switch, eliminate the connection and try a direct connection to your router.

How do I connect my DVR to my local network?

If you are unsure of what your DVR LAN IP address is, you can find this by accessing the Network Setup menu from the DVR. Press the ‘Setup’ button. Enter the system password and press ‘Enter’. Select ‘System Setup’ and press ‘Enter’.

What app do you use for Dahua?

IDMSS
With Dahua’s mobile application IDMSS(IOS)/GDMSS(Android) allows you to add Dahua recorders and cameras to the mobile app using P2P. IDMSS/GDMSS already downloaded in your mobile device.

How do I connect my Dahua DVR to my computer?

How to Use Dahua SmartPSS on PC

  1. Download the latest version of Dahua SmartPSS here.
  2. After installation, click the icon to launch the SmartPSS.
  3. You will be asked to enter password.
  4. You will be asked to set answers to the security questions.
  5. Login the Dahua SmartPSS.

How do I connect my DVR to my router?

Getting Started

  1. Make sure that your Modem is connected to the internet.
  2. Connect your modem to the internet port on your router.
  3. Connect your DVR to one of the data ports of your router.
  4. Connect your DVR to your monitor.
See also  Which Job Is Best After 10Th?

How can I access my DVR from outside network?

DVR Viewer Software Setup for Network / Remote Internet Camera View

  1. DVR Viewer Setup.
  2. Assign an IP Address to your Surveillance DVR.
  3. Local Area Network (LAN) DVR Viewer Access.
  4. Setup Port Forwarding on your Router.
  5. Setup static DHCP IP Address.
  6. Setup Dynamic DNS on your Router.
  7. Setup Internet Connection to your DVR.

How do you use Dahua DDNS?

How to Setup DDNS in a Dahua Device

  1. This guide will help you setup and configure Dynamic DNS within your Dahua device.
  2. Step 1: Log in to the camera using the local IP address.
  3. Step 2: Click “Network.”
  4. Step 3: Click “DDNS” and then click “Enable.”
  5. Step 4: Select No-IP from the “DDNS Type” drop down.

What is the default password of Dahua DVR?

If you firstly use the Dahua DVR, but don’t know the default account info, please try the following default accounts: admin/admin admin/123456 (master account of local and network accessing) 888888/888888 (local administrator) 666666/666666 (restricted user)

How do I reset my Dahua DVR?

Step by Step Instructions

  1. From Live View. Right click select Main Menu.
  2. Under Setting. Click System.
  3. Click Default.
  4. Click Factory Reset.
  5. A prompt will appear to confirm the factory default.
  6. The unit will default and reboot.
  7. When the device has booted back up it will be factory reset and is now ready for device initialization.

How can I connect my CCTV laptop with wifi?

How to connect a wireless camera to your computer?

  1. Plug your wireless security camera’s power adapter into an electrical outlet to turn the camera on.
  2. Log on to your PC.
  3. Open any standard web browser on your computer and enter the IP address of the camera into the address bar at the top of the window.
See also  How Do I Track Ae?

How can I connect my CCTV laptop to the Internet?

Here is how:

  1. Get your security camera charged. Use the power adapter to get the camera plugged-in and charged.
  2. Use the network cable to connect to the camera and the computer.
  3. Scan and find out the security camera’s IP address on the computer.
  4. Change the computer’s IP address to the same network prefix of the IP camera.

How do I watch my DVR on my computer?

Web Browser Remote Access Setup Instruction

  1. Connect your DVR to your router with a CAT-5 network cable.
  2. Connect a monitor to your DVR if you have not already done so and power your DVR up.
  3. Access the DVRs menu system using a mouse or the wireless remote control.
  4. On the DVR System Menu click the Network Sub-Menu.

How do I connect my CCTV DVR to my TV wirelessly?

Step-By-Step Instructions

  1. Directly connecting your CCTV camera to your TV is fairly straightforward.
  2. Connect your camera to your CCTV DVR or NVR.
  3. After you connect your camera to your recorder, connect your recorder to your TV.
  4. Attach the power adapter to your DVR/ NVR and turn on your TV.

Can you connect a DVR to a smart TV?

Connect one end of a full-size HDMI cable to the HDMI 1 Out port on the back of the DVR box. Connect the other end of the cord to the TV. Plug the other end of the same HDMI cable into the HDMI 1 In port on the back or side of your television. Turn on the equipment.

Can you use a DVR with a smart TV?

What is this? Samsung smart TVs have just the DVR software. You will need to plug in a storage device using the USB port on the TV to store your recordings. You can use either a flash drive or a hard disk for storage.

Contents

This entry was posted in Smart Camera by Warren Daniel. Bookmark the permalink.
Avatar photo

About Warren Daniel

Warren Daniel is an avid fan of smart devices. He truly enjoys the interconnected lifestyle that these gadgets provide, and he loves to try out all the latest and greatest innovations. Warren is always on the lookout for new ways to improve his life through technology, and he can't wait to see what comes next!