How Do I Connect My Cobra Camera To My Phone?

How do I connect my Cobra dash cam to my phone?

Enter your Android device’s Bluetooth Settings Menu. Scan for devices and select Drive HD to pair. Enter the Cobra iRadar App. A “connected” chime will sound, and the Bluetooth icon will turn white on the dash cam display.

How do I pair my Cobra wireless camera?

1. Connect the camera to a power outlet and place the monitor within 1ft (30cm) of the camera.
2. Tap the Menu icon ( ) and use the joystick to select Camera > Pairing.
3. Select a channel to pair the camera with.
4. When the screen prompts press the Pair button on the camera before the timer finishes counting down.

How do I set up RXCamView app?

Open up RXCamView on your device and tap on the head and shoulders icon to open the side menu. Then tap on ‘Device List’. On the Device Manager page, tap on the ‘+’ icon then tap on ‘IPC/NVR/DVR‘. The app will request permission to use your camera, allow it to.

What app do I use for my Cobra camera?

1) Go to cobra.com/support/CobraTag in a browser on the Android phone. 2) TAP THE LINK TO DOWNLOAD THE ANDROID APP FILE (BAC11292012. APK).

What is the app for Cobra camera?

For the CDR, DASH, or CCDC Series, please download the Cobra iRadar App. RECORD YOUR RIDE! This app enables you to remotely control compatible Cobra dash cameras to view live video, upload and share videos, adjust settings, and more!

What is the default password for Cobra wireless surveillance system?

000000
Before you Begin. You will need your monitor screen and your phone with MyCamView installed so that you can check the device connects after the network password has been reset. The default password is ‘000000‘, so it’s worth trying this first.

How do I reset my cobra?

Guide To Hard Reset/Factory Reset AT Cobra

1. Step 1: Go to settings on your AT Cobra.
2. Step 2: In settings, find and select the “Restore Factory Settings” option.
3. Step 3: Now, It will ask you to type your phone password in order to proceed with the factory resettings opertion.

How do I connect my Cobra security camera to my TV?

Easiest Way to Connect Security Cameras to TV

1. Connect CCTV cameras to the NVR with Ethernet Cat 5/6 cables.
2. Connect the security camera NVR to TV with the HDMI cable.
3. Power the NVR with the power adapter.
4. Turn on the TV, and the live view will be shown on the screen.

How can I connect my security camera to my phone?

HOW TO CONNECT CCTV TO ANDROID OR IPhone ?

1. Step 1: CONNECT DVR TO MONITOR DIRECTLY.
2. Step 2: CONFIGURE CCTV DVR SETTINGS.
3. Step 3: NOW CONFIGURE WIFI ROUTER FOR DVR.
4. Step 4: CONNECT DVR TO WIFI VIA LAN CABLE.
5. Step 5: CHECK THE SETTINGS.
6. Step 6: NOW CONNECT TO ANDROID PHONE.

Why can’t I view my security cameras on my iPhone?

And here are some common troubleshooting tips if you are unable to view cameras on connected app: Check the security camera connection and power. Make sure the network connection is stable by testing with other network devices. Reboot the security camera to fix issues.

Why did my security camera stop working?

In general, the issue of “video loss” on CCTV security cameras or DVR/NVR, in many cases, comes down to several factors: insufficient power supply, unstable network, wiring problems, hardware (cameras, NVR/DVR or monitor) failures, inefficient camera software and IP address conflicts.

Where is the device ID for Cobra surveillance system?

The device ID can be used to connect a device during setup, or to recognize a device on a network where multiple devices are present. On newer systems the Device ID may be printed on the QR code sticker. This sticker is generally located on the side or base of a camera, or on the bottom of a DVR / NVR recorder.

How do I reset my Cobra 8 channel surveillance DVR?

Answer: The only reset is to shut down the unit or power down. You can due reboot from the menu guide and clear the memory on the hard drive.

How do I download Cobra?

To install COBRA:

1. Click on the “COBRA Installer” link above to download the installer.
2. Locate the file “cobradontnetv4dot0.exe” on your computer and double-click to run the installer.
3. Follow all on-screen instructions to complete the installation.
4. To run COBRA, look for the “COBRA” entry in your “Start” menu.

How do I reset my DVR admin password?

Reset Password of DVR/NVR by Scanning QR Code

1. Tap More > Reset Device Password to enter the Reset Device Password page.
2. Scan the QR code on the local GUI of the DVR or NVR.
3. Go to the device’s local GUI.
4. Enter the received verification code on the Verify by Reserved Email window and then click OK to continue.

Why does my Cobra security camera say out of range?

If your wireless camera is showing an Out of Range error message, the issue may be caused by your camera not receiving enough power, the distance between your router and cameras, or other physical barriers causing signal interference.

Why is my Cobra DVR beeping?

The beeping noise is telling you that the DVR has detected a problem somewhere in its setup. Please try to remember the last thing you changed on the DVR’s settings and try reversing it.If the camera/s and the DVR are not using the same output standard, it will cause the DVR to make an alarm or beeping noise.

How can I reset my password?

Change your password

1. On your Android phone or tablet, open your device’s Settings app Google. Manage your Google Account.
2. At the top, tap Security.
3. Under “Signing in to Google,” tap Password. You might need to sign in.
4. Enter your new password, then tap Change Password.

How do I reset my Cobra radar?

Press and hold the “PROGRAM/MUTE” button for two (2) seconds. The detector will emit Three (3) beeps and PROGRAM will appear. Then brief programming instructions will scroll through the display three (3) times. Choose “RESTORE FACTORY SETTINGS”.

How can I view my security camera on my TV?

One of the most well-established apps for viewing security footage is Tiny Cam Pro. It’s an android application packed with features to help you customize your security feed.