To change the Wi-Fi network, tap the reset button located in the small hole on the back of the camera. Insert a paperclip into the hole and press firmly. The camera restarts and the indicator light pulses blue and green. Complete camera setup to change the Wi-Fi network.
How do I reset my cloud edge camera WiFi?
Using Reset Switch
- Turn off the Cloud Edge appliance.
- Long press the Reset switch located at the back of the Cloud Edge device.
- Turn on the Cloud Edge appliance.
- After 10 seconds, the LED on the back will blink. Once it blinked, release the Reset switch.
How do I connect my camera to my WiFi network?
Digital Camera WiFi Connection
- Press the Home or Menu button on your camera.
- Open Settings, then WiFi Setup or WiFi Options, if applicable.
- Make sure your camera’s WiFi connection is turned on.
- Your camera may automatically connect to your WiFi network.
- Enter your WiFi network’s password.
Why is my CloudEdge camera not working?
1) Press and hold the power button for 5 seconds. If the device still has power, the work indicator will slowly flash red light, which indicates that the WIFI is waiting to be configured. 2) If the device does not respond when you press the power button, which indicates the power is not enough to start.
How do I setup a wireless cloud camera?
To set up your Amazon Cloud Cam:
- Download the Amazon Cloud Cam app from your device’s appstore.
- Follow the instructions in the Amazon Cloud Cam app to connect to Wi-Fi and register your device.
- Complete setup and monitor your live view.
Why is my IP camera offline?
Occasionally, your camera may go offline due to network connectivity.Even if your camera is not too far from your router, there may be different materials (walls, floors, metal, concrete, plaster) that can block the WiFi signal. Minimize the number of physical obstructions between the camera and router.
How do I update cloud edge app?
Find the Cloud Edge firmware package you downloaded earlier, and then click Upload on the Device List column. Select the edited Cloud Edge device list and click Deploy. Go to Customers and select the necessary customers. Click Cloud Edge Firmware and click Update Now.
How do I connect NVR to wireless router?
To connect using WPS, power the NVR up without the Ethernet cable attached, then on your router press the WPS button for the specified time, (check your router for this) usually five seconds, then press the WPS button on the rear of the NVR for 2-4 seconds. Leave the NVR for a few moments and it should connect.
How do I connect my wireless camera to my phone?
How can I connect my Android phone to my camera via Wi-Fi?
- Enable the hotspot function in your Android phone, i.e., you set up a Wi-Fi network on your Android phone.
- Connect the camera to the Android phone’s hotspot-enabled Wi-Fi network.
How do I use the cloud edge app?
Setup is incredibly easy. Download the CloudEdge app, open the app and follow the instructions, press the start button for 5 or 6 seconds until the red light flashes, select your wifi router and put in the password, point the camera at the QR code, the camera beeps and you’re up and running.
What is the cloud edge app?
CloudEdge is established for providing a set of video service platform for family and enterprise.
Do you have to pay for CloudEdge?
It’s free if you phone is set up to upload to the cloud.
What is Cloud Cam WIFI?
Amazon Cloud Cam is a connected security camera that records and streams video in 1080p whenever it detects motion; the camera is only enabled when motion is detected, so it’s not recording 24/7.
How do you use WIFI on a smart camera?
Select which Wi-Fi network you’d like the camera to connect to and enter its password. Wait for the camera to connect to your Wi-Fi and display live video. Place the camera in its final location. Configure the settings, such as motion detection regions and notifications.
How do I fix my offline camera?
You can reset your home router and/or modem. A) Power off the camera (unplug the camera, or hold the button down for 5 seconds until the lights turn off; press it to turn it back on after about 1 minute.) 3. If the camera is still offline, you can factory reset your camera.
How do I connect my Sricam to WiFi?
Once you get it, the connection will be easily done.
- Download Sricam app.
- Register Sricam app ID.
- Sign in the app.
- Launch the Sricam SP012 IP camera.
- Reset the camera.
- Add the camera to the app.
- Connect the camera to the app via WiFi.
- Input password and wait until the connection finishes.
Why wont my surveillance camera connect to WiFi?
Make Sure There Is No Signal Interference. If there is a bad reach, the IP camera can’t find your WiFi signal, and it cannot connect to the WiFi. The IP camera should not be too far from the router. Check the distance between the IP camera and the router.
How much is the cloud edge app?
CloudEdge APP:
| Alert Recording | ||
|---|---|---|
| Monthly | Yearly | |
| 3 days | $2.99 | $30.00 |
| 7 days | $4.99 | $50.00 |
| 30 days | $7.99 | $160.00 |
Where is Zumimall located?
Shenzhen | Sydney | New York. ZUMIMALL is one of the world’s finest smart home security manufacturer. We’re specialists in the most important thing – safety, and security, that’s affordable but of the highest quality.
How does security camera cloud storage work?
IP Camera Cloud Storage: How Does It Work. IP camera cloud storage uses Internet to store your encrypted IP camera recordings in the off-site storage software, namely the cloud server, so that you can view, playback, delete and download the recordings from your cloud IP camera cloud as long as there is network.
What app can I use for my wifi camera?
The Best IP Camera Apps for Android
- tinyCAM Monitor. Features. 2-way audio on selected models. Motion detection (both in-app and on-camera), face detection.
- IP Cam Viewer Pro. Features. 1600+ devices supported including NVRs and DVRs.
- ONVIF IP Camera Monitor (Onvifer) Features. Supports ONVIF, RTSP/MJPEG/H.264.
Contents