When the lights match a blinking blue and solid green pattern, then press Discover Device and you are asked to join the Sync Module Wi-Fi network. Tap Join, and then select your Wi-Fi network from the available choices. Carefully enter your Wi-Fi password and tap Join on your keyboard.
Why is my Blink not connecting to Wi-Fi?
Restart your device, or try switching the Wi-Fi setting off and on again to establish a connection. Make sure your mobile device is within range of your router or access point. Check that your router and any access points are powered on. Restarting your Wi-Fi router may also resolve this issue.
Why won’t my blink Camera Connect?
If one of your Blink cameras isn’t responding, you may see error messages like “Camera Busy” or “Thumbnail Failed”.Wait two minutes for Internet service to be restored, then try using your camera again. Power cycle your camera. To do this, remove the batteries for 10 seconds and reinsert them.
Does blink camera connect to Wi-Fi or sync module?
Blink’s original Indoor, XT, and XT2 cameras will only connect to the same Wi-Fi SSID that the Sync Module is connected to. To set up these cameras with an extender, be sure to rename the Wi-Fi extender SSID to be the same the main Wi-Fi network, and use the same password.
How do I reset the wifi on my blink camera?
From the the Camera Settings screen scroll down to the bottom and tap Change Wi-Fi. In the Change Wi-Fi screen, follow the instruction to “Press and release the reset button on the camera until red and blue lights flash. When ready, the lights will display: Blinking Blue, Steady Green.”
How do I resync my blink camera?
To reset a Blink camera, reset the Sync Module by holding down the button on the module’s side until its light turns red; this resets the Blink camera system and requires reinstalling the module in the Blink app to use the camera again.
What network does Blink use?
2.4 GHz Wi-Fi network
Blink devices use your 2.4 GHz Wi-Fi network to communicate with the main servers. Some routers create a 5 GHz network that may be visible to your phone or tablet, but will not be visible to the Blink system. Important: Blink devices communicate on port 443 HTTP Secure (HTTPS).
Does Blink have its own WIFI?
The Blink app needs to connect to the Sync Module’s Wi-Fi network. It is named BLINK-” followed by four digits from the Sync Module Serial Number. Tap Join, then you are asked to join your local Wi-Fi network.The Add Sync Module screen displays 2.4 GHz Wi-Fi networks within range.
Does Blink work with cellular?
No, the Blink product does not operate as a cellular device. To use the system you need wifi and internet access that is always on.
Will Blink cameras work with hotspot?
We do not recommend connecting the Blink system using a cellular hotspot or satellite based internet connection.
What is the WiFi range of Blink cameras?
How far away can camera units be placed? Assuming a fairly standard home (single building, no unusually dense construction materials), the Sync Module should be able to communicate with Blink units up to (and perhaps over) 100′ away in any direction.
How do I reconnect my Blink Sync module?
If you are having any issues with your Sync Module, it is best to first power cycle the Sync Module by unplugging the power cord from the back of the unit for 10 seconds and then plug it back in. This should cause the device to reboot and then reconnect within 45 seconds displaying a solid blue and solid green light.
The reset button is located on the right-hand side of the Sync Module next to the USB port. Please note that this could take between 15-30 seconds. This will cause the Sync Module to reboot into setup mode.
How do I reset my blink camera without syncing the module?
Blink mini camera doesn’t need sync module to operate. Therefore, Blink mini cameras have to be reset separately through the reset button available on the bottom of the camera. Press and hold the reset button for 10-15 seconds.
Where is the QR code on Blink?
On the Blink app Home screen, tap the + icon in the top right corner. 2. Tap the Blink mini camera as indicated by an arrow in the image below. You are taken to the Scan QR Code screen, where your camera may request permission to scan the QR code.
How do I access Blink cloud?
On the Home screen, the cloud icon appears at the bottom of each system with a Sync Module as shown in the image. Note that Blink Mini camera systems do not display this icon because they communicate without need of a Sync Module. Tapping on the cloud icon brings you to a Sync Module status screen, shown here.
Can someone else access my blink camera?
You can only invite users from your desktop because it is not possible to access the Admin portal from the mobile Blink app. Anyone can be invited to join you on Blink and you can begin working together from the moment they activate their Blink account.
Can you use WIFI camera without Internet?
Even though a connection to the Internet is not required in order to use your IP security camera, it can be a good idea to connect your cameras to the Internet in order to get the most out of your IP cameras. Without an Internet connection, you can only access your security cameras through your local area network.
What does it mean when Blink camera flashes red?
The Blink Outdoor Camera may be sending you signals that something needs to be fixed by flashing different colors. If you see your camera flashing red, that can mean one of two things: either your device is not connected to the internet, or your battery is running low.
Does blink camera work with Android phone?
Blink apps require devices to have a current version of iOS, Android, or Fire OS.If your device is iOS 12.5, Android 6.2. 4, Fire OS 5.1 or higher, your device should be compatible. You can check the Operating System version in the System Settings of your device.
Will a Wi-Fi extender help with security cameras?
As the name implies, Wi-Fi extenders increase the distance your Wi-Fi signal can travel. Whether you need to place security cameras far from the router such as outside or if you’re connecting multiple security cameras, Wi-Fi range extenders will help to bridge the gaps between your cameras and router.
Contents