How Do I Connect Multiple Hikvision Nvr?

Open a Web browser and go to www.hik-connect.com and login. Select My Shared Devices. Select Share Device. Enter the e-mail address of the hik-connect account to share with, select the device to share and select Share.

Can you link two Hikvision NVR together?

It is possible to combine multiple NVR’s on the same network into one a single NVR.*Both NVR’s must be upgraded to the latest code level. Setup both NVR’s with their respective cameras, once that is done, simply go to a spare channel on the 16ch NVR and then search for a new camera to add.

How connect NVR to NVR?

Here is how you can proceed with the hardware setup:

1. Take the Ethernet cable from the router and connect it at the back of NVR. Ensure that NVR is connected to the Internet.
2. Use Ethernet cables to connect the IP cameras to PoE NVR.
3. Take an HDMI cable or a VGA cable to connect NVR and TV or monitor.

How do I add a second device to HIK-connect?

Add a Device by Hik-Connect Domain

1. On the device list page, tap > Manual Adding to enter the Add Device page.
2. Select Hik-Connect Domain as the adding type.
3. Enter the device serial No.
4. Tap to search the device.
5. Tap Add on the Result page.
6. Enter the device verification code.
7. Optional: Tap Configure DDNS to configure DDNS.

How do I connect multiple DVR?

Setup Multiple DVR Viewer Software (EMS)

1. Download the latest EMS software for the iDVR here.
2. Launch the software on your Windows PC.
3. One the software launches: 1) Click the Device button.
4. When the device manager window closes: 1) You will see the DVRs added to the EMS software.
5. After the virtual DVR view is added.

Can I connect 1 IP camera to 2 NVR?

yeah you dont want to connect NVR to NVR.. you want both NVR’s connecting to the cameras via external switch, the cameras can handle streaming two feeds simultaneously.. your not getting much of a failsafe if you chain them together because one will always depend on the other.

How Share hikvision connect?

Steps: (1) Open Hik-Connect app in your mobile and login your account; (2) Go to More->Manage Sharing Settings to enter the Share Device Interface. (3) Set the account you want to share with. You can tap the Email Address field or the Mobile Phone Number field to set the account that you want to share with.

How do I enable Poe on Hikvision NVR?

1, Connect your camera to the POE port of the NVR. Assume you connect your camera to the POE port 2. 2, Go to Camera Management->Camera->IP Camera, highlight the second channel (D2) and click Edit. 3, Select Adding Method as Plug-and-Play, click OK.

How many cameras can be connected to a NVR?

NVR can connect maximum 9 Network Cameras.

How connect hikvision to HIK-connect?

Version 3.0

1. 1) Right click and select Menu and then browse to Configuration > Network > Platform Access.
2. 2) Tick the Enable box.
3. 3) You should hopefully now see a screen like the one below.
4. 1) Open the Main Menu by clicking the Cog icon and then browse to Network > Advanced > Platform Access.
5. 2) Tick the Enable box.

How do I add HIK-connect device to iVMS 4200?

To add a Hik-Connect or Cloud P2P device, you must first login or create a Hik-Connect account using the app or at www.hik-connect.com. Once added, come back to this screen and modify the devices to iVMS-4200 by placing a checkmark next to the device(s) and click the Modify [button].

How do I connect two DVRs to one router?

How to port forwarding of multiple DVR on single Static IP using TP-Link Router.

1. Login to the web interface of each of the DVR’s and go to Network Settings Main-System Configuration-Network Configuration.
2. On the 1st DVR you will record the assigned IP Address and make note of the HTTP port (should be 80)

Can I connect one camera to two DVR?

Connecting video from CCTV cameras to multiple monitors can be very simple using video distributors and multiplexers.The camera may also be connected to one or more additional spot monitors. Below is a diagram that illustrates how video from four CCTV cameras can be connected to a DVR and four monitor displays.

How many IP cameras does cat6 have?

All four HD PoE cameras can be powered by one single Cat5/6 Ethernet network cable.

Why is my HIK-connect not working?

Make sure your phone has connected to a Wi-Fi network.Make sure the device is powered on and then tap OK on the Initialize Device page to enter the Network Connection page. Note: If you have set the device before, you should reset the device. Tap How to Reset and follow the instructions to reset your device.

How do I share my LTS connection?

How to Access from Live View: From the Main View screen, click the […] in the Top Right corner to get into the More Settings screen. From Here Select the Share icon to get to the Share Device screen. Set the permissions you would like to set for this shared account and then hit OK.

What is HIK-connect verification code?

The device verification code is used for verifying user identity, as well as encrypting a device’s videos (including live videos and recorded video files) and captured pictures. You can change the device verification code for the network camera and Mini Trooper (a kind of camera powered by battery).

How do I connect NVR to PoE?

How to connect a POE Switch to a NVR designed for POE Switches:

1. Plug the IP Cameras into the POE Switch.
2. Plug the POE switch into the NIC 2 on the NVR.
3. Plug the POE switch into the wall outlet.
4. Follow the instructions on how to tell the NVR to add and record those cameras:

Do I need a PoE switch with my NVR?

NVR without Power over Ethernet means it has no Ethernet ports on the back panel, so it can not be connected to IP cameras directly, which requires an external PoE switch or a power adapter to provide power to each IP camera.

Can I connect PoE switch directly to NVR?

You can plug the PoE switch to PoE NVR, then plug the NVR LAN port to the router.(The NVR LAN port is a Gigabit Ethernet port, the other ports are 100Mbps Ethernet ports). And in this kind of connection, all the cameras will obtain IP address from the NVR, and can’t be connected as separate devices.

How can I extend my NVR signal?

The First Method of extending the NVR signal is using the built-in Repeater feature of the IP Camera. There are also separate Repeaters (picture of such a repeater attached) built specifically for extending NVR signal, and the method to set them up is the same as setting up the IP Cam Repeater.