How Do I Change The Wifi On My Wyze Plug?

Press and hold the on/off button on the side of the Plug until the status light begins to flash blue. Once the status light begins to flash blue, you can setup the Wyze Plug via the app again with the new WiFi network.

How do you reset a Wyze Plug?

First, ensure that the outlet or fixture that the Wyze Plug is plugged into isn’t controlled by a switch (such as a light switch or power strip.) If so, make sure it is turned on. Next, try and power-cycle the Plug by removing it from the outlet, waiting at least 5 seconds, and then plugging it back in.

How do I reconnect my Wyze Plug?

1. Plug in your Wyze Plug into an outlet. The status light on the plug will flash blue, indicating it’s in pairing mode.
2. Tap Next.
3. Select your network and enter your network password. Tap Next.
4. Pairing will complete automatically.
5. Enter a name for your Wyze Plug, then tap Finish.

How do I fix my Wyze Plug offline?

Troubleshooting Steps:

1. Check if your WiFi connection is strong and working properly.
2. Reconnect the outdoor plug to your network.
3. Factory reset the outdoor plug.
4. If it’s still offline, move the outdoor plug closer to your router, then reset the plug again.

How do I fix WYZE WiFi?

Basic Troubleshooting

1. Check that your phone or tablet is on a 2.4 GHz network. On iOS: In the Settings app, tap Wi-Fi to see your network name.
2. Forget all WiFi networks, restart your phone/tablet, then reconnect to your 2.4 GHz network.
3. Power cycle your Wyze Cam.
4. Force close the Wyze app, then open it again.

How do I change the WiFi ring?

Just open the Ring app, navigate to the cam, go to Device Health, and tap Change Wi-Fi Network. From the list of networks, choose the one that you want to connect to. Some devices may offer a different option, called Reconnect to Wi-Fi.

How do I connect my WYZE plug to Alexa?

Link Alexa with your Wyze Account

1. Open up the Wyze app, go into your Account settings, then tap on “Works With” to link Alexa to your Wyze account.
2. You can also link your Wyze account by asking Alexa to “Enable Wyze skill”.
3. Once enabled, follow the on-screen instructions to link your Wyze account to Alexa.

How do I reset WYZE WiFi?

To perform a factory reset on your Wyze Plug:

1. Press and hold the on/off button on the side of the Plug until the status light begins to flash blue.
2. Once the status light begins to flash blue, you can setup the Wyze Plug via the app again with the new WiFi network.

How do I connect my WYZE plug to Google home?

How to connect Google Assistant:

1. Set up your device with your Wyze app.
2. Make sure the firmware for your Wyze device is the latest version by going to Account > Firmware Upgrade.
3. Download and configure Google’s Home app.
4. Launch the Home app.
5. Tap Add.
6. Tap Set up device.
7. Tap Works with Google.

Why does my smart plugs keep going offline?

Smart Life devices go offline due to overloads in your router when your router renews the LAN/WAN IP address, or if there are errors stored in its cache. Solutions to this problem include clearing the cache or using a dedicated 2.4g WiFi router for Smart Life devices.

Why do my WYZE bulbs keep going offline?

Check that the bulb is plugged in and turned on at the light socket or physical switch. The bulb requires a constant power source to stay connected. If connected to a dimmer switch, make sure the dimmer switch is set to maximum to ensure the bulb is getting the power it needs.

Why does my WYZE CAM say offline?

Your camera appearing offline can also lead to contact and motion sensors falling offline if they’re attached to a Bridge plugged into the affected camera. To fix this you will need to power cycle your camera. Unplug the camera from its power source.Plug the camera back into the power source and allow it reinitialize.

How do I put my WYZE thermostat back on line?

How Do I Get My Wyze Thermostat Back Online?

1. Close out of the Wyze app on your phone or smart device.
2. Reboot your home Wi-Fi router by holding down the reset button or unplugging it.
3. After a few minutes, plug the router back in and allow it to restart fully.
4. Open the Wyze app back up and try to adjust the thermostat.

How do I connect to 2.4 GHz WiFi?

To connect your Android device to a 2.4 GHz network:

1. Unlock your device and tap the Settings app.
2. Tap Network & Internet > Wi-Fi.
3. Enable WiFi by tapping Use WiFi at the top.
4. Select a 2.4 GHz WiFi network.
5. If prompted, enter the password for the network.

How do I know if my network is 2.4 or 5?

1. Connect to the WiFi network.
2. Open your networks panel from your taskbar (click the WiFi icon in the bottom right).
3. Click on “Properties” of your WiFi network.
4. In the new window that opens, scroll all the way down to “Properties”.
5. “Network Band” will either say 2.4GHz or 5GHz.

How do you tell if your network is 2.4 or 5GHz?

If you have an Android phone, you can definitively confirm whether the network is 2.4G or 5G.

1. Connect to the network.
2. Go to Settings > Network & internet > WiFi > Select the network properties (tap the gear icon or menu icon).
3. Read the frequency setting.

How do I change the WiFi on my WYZE camera?

How to change your WiFi details

1. In the Wyze app, tap Home.
2. Tap the+ plus sign in the upper left, then select Add Device > Cameras.
3. Tap on your camera version.
4. Follow the on-screen prompts to set up your camera again.

How do you change your wireless Internet password?

How to Change Your WiFi Name and Password

1. Open a web browser.
2. Then type your router’s IP address into the search bar and press the Enter key.
3. Next, enter your router’s username and password and click Sign In.
4. Then click Wireless.
5. Next, change your new WiFi name and/or password.
6. Finally, click Apply or Save.

Where is the smart network switch?

With Mobile Data enabled, go to Menu > Settings > Wi-Fi. Tap the action button (More button on some Samsung devices). Tap on smart network switch. Set it on OFF if you want it disabled or ON if you want to enable Smart network switch.

Does Wyze sense work with Alexa?

The sensors work with Alexa, but not Google Assistant.
Wyze Sense v2 sensors, including entry sensor and motion sensors, work with Alexa! Create routines in the Amazon Alexa app that execute when your sensor is left open or closed.

How do I unlink my Wyze from Alexa?

If you’ve linked your Wyze account through the Alexa app, you can open the Alexa app (or go to alexa.amazon.com) and select Smart Home. In the Devices tab, tap your camera then use the options to delete or disable the camera. This will unlink it from the account.