How Do I Change The Network On My Wyze Doorbell?

Press and hold the on/off button on the side of the Plug until the status light begins to flash blue. Once the status light begins to flash blue, you can setup the Wyze Plug via the app again with the new WiFi network.

How do I reconnect my WYZE doorbell to a new WiFi?

Steps to Connect Wyze Cameras to New Wi-Fi
Log in if you haven’t set the app to remember you. Connect your Wyze camera to the USB port or a power outlet. Wait until it flashes yellow (about thirty seconds). Hold the Setup button on the back of the camera until you hear the automated message “ready to connect.”

How do I connect my WYZE camera to a different WiFi?

Here’s how to change the Wyze Cam Wifi

1. Load the Wyze app on your mobile phone;
2. Log into your account;
3. Plug the USB cable to turn on the Wyze camera;
4. Hold the setup button for about 20 to 30 seconds until you hear the message “ready to connect”;
5. On the Wyze App click on the dots on the top right corner;

How do I reset my WYZE doorbell?

To factory reset your doorbell and chime:

1. Press and hold the button on the side of Wyze Chime Pro for 3-5 seconds until it says “Reset successfully”.
2. The WiFi signal LED will start flashing red > solid yellow > flashing yellow.
3. The device is now ready to be set up again.

How do I change the WiFi on my ring doorbell?

Just open the Ring app, navigate to the cam, go to Device Health, and tap Change Wi-Fi Network. From the list of networks, choose the one that you want to connect to. Some devices may offer a different option, called Reconnect to Wi-Fi.

Why is my wireless WYZE camera offline?

Make sure the Wyze Cam Outdoor is charged. A low battery can cause poor connectivity. Check the battery level from the Home screen of the Wyze app, under the camera’s name. If the battery is low, charge the camera for 4 hours to guarantee a full charge.

Why does my WYZE camera say Cannot connect to local network?

Forget all WiFi networks, restart your phone/tablet, then reconnect to your 2.4 GHz network. On iOS: In the Settings app, tap General > Reset > Reset Network Settings. On Android: In the Settings app, tap General management or System, tap Reset or Reset Options > Reset Network Settings. Confirm the reset.

How do I sync my WYZE camera?

To set up your Wyze Cam or Wyze Cam Pan:

1. In the Wyze app, tap Home, then tap + plus sign on the top left.
2. Tap Add Device.
3. Tap Cameras > Wyze Cam or Wyze Cam Pan.
4. With your camera plugged into an outlet, tap Next in the app.
5. Pull the base from your camera and single-press SETUP on the bottom of the camera.

How do I change the WiFi on my blink camera?

To start, tap the settings icon for the Mini camera you want to change. From the the Camera Settings screen scroll down to the bottom and tap Change Wi-Fi. In the Change Wi-Fi screen, follow the instruction to “Press and release the reset button on the camera until red and blue lights flash.

How do you pair a WYZE doorbell with a chime?

In the Wyze app, tap Home, then tap + plus sign on the top left. Tap Add Device. Tap Cameras > Wyze Video Doorbell. Tap Next.
To set up your Wyze Chime:

1. Tap Add a Wyze Chime, then tap Next to continue.
2. Plug your chime into a standard power outlet close to the doorbell.

Why does my WYZE doorbell keep going offline?

Power Cycle your network
Unplug your router for 10 full seconds, then plug it back in. This will reboot the network and clear up any potential channel congestion that may be causing trouble for the doorbell.

How do I contact WYZE?

Customer Support
There are many ways to contact us, our phone number is (206) 339-9646, or you can chat with an agent or create a ticket on the support site. We’re open for support between 4 am – 8 pm PT Monday through Friday, and 8 am – 6 pm PT Saturday and Sunday.

How do I change the channel on my WiFi?

How to Change Your WiFi Channel

1. Open a web browser and type your router’s IP address into the address bar.
2. Then hit Enter on your keyboard.
3. Next, enter your username and password.
4. Then open Wireless Settings.
5. Next, click the Channels drop-down menu and change your WiFi channel.
6. Finally, make sure to hit Save or Apply.

How do I change the WiFi on my ring doorbell without removing it?

Follow these steps to reconnect your doorbell or security camera wifi in the Ring App:

1. Tap on the three lines on the top left.
2. Tap Devices.
3. Select doorbell or security camera you need to reconnect to wifi. The next screen is the Device Dashboard.
4. Tap on Device Health.
5. Tap on Reconnect to Wifi or Change Wifi Network.

Where is the smart network switch?

With Mobile Data enabled, go to Menu > Settings > Wi-Fi. Tap the action button (More button on some Samsung devices). Tap on smart network switch. Set it on OFF if you want it disabled or ON if you want to enable Smart network switch.

How do I reset my Internet connection on my WYZE camera?

To perform a factory reset on your Wyze Plug:

1. Press and hold the on/off button on the side of the Plug until the status light begins to flash blue.
2. Once the status light begins to flash blue, you can setup the Wyze Plug via the app again with the new WiFi network.

How do I fix my offline WYZE camera?

Troubleshooting:

1. Try power cycling your camera by unplugging for about 30 seconds and plugging it back in.
2. Reboot your router.

How do I use WYZE camera offline?

You must have an internet connection to set up the camera and configure it with the Wyze app. And if you have a microSD card inserted and Local recording to microSD card turned on in your settings, the camera will continuously record to that microSD card, even if offline.

Can’t connect to local network?

If Wi-Fi is disabled and you’re still not getting a network connection, make sure that ethernet is enabled in the same Network and Internet Settings section. Find the right network. It will likely say Local Area Connection. If you see Not connected below the name, right-click it and select Enable.

How do I connect to 2.4 GHz WiFi?

To connect your Android device to a 2.4 GHz network:

1. Unlock your device and tap the Settings app.
2. Tap Network & Internet > Wi-Fi.
3. Enable WiFi by tapping Use WiFi at the top.
4. Select a 2.4 GHz WiFi network.
5. If prompted, enter the password for the network.

Where can I find SSID?

Look for a sticker on your router.

1. Left-click the wireless signal icon (most often located in bottom right corner of the desktop).
2. Within the list of networks, look for the network name listed next to Connected. This is your network’s SSID.