How Do I Change The Fingerprint On My Yale Lock?

Touch the keypad of the front body gently with your palm. Enter the registered fingerprint number in the keypad. Press the ? (Registration) button in the back body again to complete the fingerprint registration. ( Press [#] button to continue the fingerprint registration process.)

How do I change my Yale lock password?

To change your passcode

  1. On the Nest app home screen, tap Settings .
  2. Tap Family & Guests .
  3. Tap You to change your own passcode.
  4. Tap Passcode.
  5. Enter a passcode you’ll remember between 4 to 8 digits long.
  6. Tap Show passcode to view the passcode.
  7. Tap Save.

How do I reset my Yale digital door lock?

How to reset your lock to its factory settings

  1. On your phone, open the Yale App and go to the lock circle screen, which is the screen that shows you whether your door is locked or unlocked.
  2. Select the Settings menu (gear icon).
  3. Select the device you wish to reset.
  4. Scroll to factory reset.
  5. Select “Reset Lock”.

How do you set a biometric lock?

Setting up your fingerprint

  1. Tap the Settings icon on your Android device and tap Lock screen and security.
  2. Scroll down and tap Screen lock type.
  3. Add your fingerprint — follow the instructions on your screen and go through the wizard. You’ll be prompted to lift and rest your finger on the home button several times.

Does factory reset remove fingerprints?

Factory Reset means resetting the device back to a state like the way it arrived from the factory. Just OOB experience again, setup your device and start using it again. So logically speaking, Factory Reset should clear the Fingerprint data.

How do I register my Yale Bluetooth?

Steps to Register Your Smart Module:

  1. Remove the batteries from your lock.
  2. Remove and reinsert the Smart Module into the slot in the battery compartment.
  3. Reinsert the batteries.
  4. Wake up the keypad by pressing the Yale logo or any key.
  5. Enter your Master Entry Code and then the gear icon.
  6. Press 7 followed by the gear icon.
See also  What Is A Lock Pin Used For?

How do I cancel my Yale digital lock alarm?

To disable the locks alarm, the lock needs to be unlocked either via the App or using the Contactless key tag.

How do I reset my Yale lock to factory settings?

Remove the mounting plate to reveal the reset button, which is located on the left side of the cable connector. Hold down the reset button while you put in the batteries. Keep holding down on the reset button until the light turns red and the lock says “Just a moment, erasing all settings.” Release the reset button.

How do I reset my Yale touch deadbolt?

To reset the lock to factory default, see the following:
2. The reset button (see image at right) is located above the PCB cable connector. 3. Hold down the reset button for a minimum of 3 seconds and then reinstall the batteries; once the batteries are properly installed, release the reset button.

How do I reset my Yale lock?

How do I Factory Reset my lock?

  1. Open the Yale Access App and go to the lock circle screen, which is the screen that shows you whether your door is locked or unlocked.
  2. Select the Settings menu (gear icon).
  3. Select the device you wish to reset.
  4. Scroll to factory reset.
  5. Select Reset Lock.

How do you set a fingerprint?

Set up a fingerprint

  1. Open your phone’s Settings app.
  2. Tap Security. Fingerprint Unlock.
  3. Follow the on-screen steps. If you don’t already have a screen lock, you’ll be asked to add a backup PIN, pattern, or password.
  4. Scan your first fingerprint. The fingerprint sensor is towards the bottom of your phone’s display.
See also  Why Do Doors Lock Twice?

How do I set up fingerprint on Iphone?

Tap Settings > Touch ID & Passcode, then enter your passcode. Tap Add a Fingerprint and hold your device as you normally would when touching the Touch ID sensor. Touch the Touch ID sensor with your finger—but don’t press. Hold it there until you feel a quick vibration, or until you’re asked to lift your finger.

How do I reset my Iphone fingerprint?

Go to Settings > Touch ID & Passcode. If you added more than one fingerprint, place a finger on the Home button to identify its print. Tap the fingerprint, then enter a name (such as “Thumb”) or tap Delete Fingerprint.

How do you reset fingerprint scanner?

Just hold the power button and restart your phone. Also, on some Android phones, you can long-press the power button for about 10s to automatically reboot your device.

Why did my fingerprint option disappeared?

You just need to go to security settings and remove the pattern protection. I.e. no screen lock at all. Then you restart the phone, and YEAH, the fingerprint option is back in menu. Thanks!

How do you connect your phone to a Yale lock?

Tap the + icon next to your home name to add a new lock. Tap the Yale lock when it appears as an available device. Using your iPhone® or iPad®, scan the 8-digit Accessory Set-Up Code located on the back of your iM1 Installation Manual (inside the Network Module box). You can also manually enter this code in the app.

How do I set up a Yale link?

To install your Yale Connect Bridge:
In the Yale Access App, go to the side menu (upper left), tap Set Up New Device. Choose Set Up Yale Connect Bridge. Choose a lock with which to associate your Connect. When prompted, plug connect into an outlet near your door and then follow the in-app instructions.

See also  What Are Considered Weak Passwords?

How do I control my Yale phone lock?

Tap the + icon next to your home name to add a new lock. Tap the Yale lock when it appears as an available device. Using your iPhone® or iPad®, scan the 8-digit Accessory Set-Up Code located on the back of your iM1 Installation Manual (inside the Network Module box). You can also manually enter this code in the app.

How do I change my digital door lock password?

Open the battery cover and press the [Registration] button briefly. Enter the master password (default is ‘1234‘) and press the [*] button. Enter the new master password and press the [*] button.

How do I reset my Yale lock without a master code?

I’ve forgotten or need to change my Primary Code

  1. Locate the black battery cover at the top of the inside door handle.
  2. Remove the battery cover.
  3. Then remove the rear cover.
  4. Now remove the cable.
  5. Press both the I and P buttons at the same time and then place the batteries back in.

How do you reset the code on a Yale Smart Lock?

How do I set or change the primary code on my Keyless Connected Smart Door Lock?

  1. Wake up the keypad by touching it using the palm of your hand.
  2. Enter your current master code and then press the hash button.
  3. Then press the number 1, followed by the hash key.
  4. Enter a new master code, which must contain 6 numbers.

Contents

This entry was posted in Smart Lock by Warren Daniel. Bookmark the permalink.
Avatar photo

About Warren Daniel

Warren Daniel is an avid fan of smart devices. He truly enjoys the interconnected lifestyle that these gadgets provide, and he loves to try out all the latest and greatest innovations. Warren is always on the lookout for new ways to improve his life through technology, and he can't wait to see what comes next!