How Do I Change My Wifi On Wyze?

Press and hold the on/off button on the side of the Plug until the status light begins to flash blue. Once the status light begins to flash blue, you can setup the Wyze Plug via the app again with the new WiFi network.

How do I fix Wyze WiFi?

Basic Troubleshooting

1. Check that your phone or tablet is on a 2.4 GHz network. On iOS: In the Settings app, tap Wi-Fi to see your network name.
2. Forget all WiFi networks, restart your phone/tablet, then reconnect to your 2.4 GHz network.
3. Power cycle your Wyze Cam.
4. Force close the Wyze app, then open it again.

Can I have Wyze cameras on different WiFi?

Yes! Since network information is used by the device itself instead of being associated account-side, you can set up Wyze devices across multiple networks with no trouble.

How do I get my Wyze camera back online?

Reboot your Wyze Base Station to reestablish the connection.

1. Unplug the base station from power, wait 5-10 seconds, then plug it back in.
2. Once the status light is solid blue, the reboot is complete.

How do I change settings on Wyze?

To change the settings, go to your Wyze app and pick the camera you would like to edit. This will take you to the Live Stream of that camera. Then tap the Settings icon on the top right.

How do I connect to 2.4 GHz WiFi?

To connect your Android device to a 2.4 GHz network:

1. Unlock your device and tap the Settings app.
2. Tap Network & Internet > Wi-Fi.
3. Enable WiFi by tapping Use WiFi at the top.
4. Select a 2.4 GHz WiFi network.
5. If prompted, enter the password for the network.

How do I change the WiFi ring?

Just open the Ring app, navigate to the cam, go to Device Health, and tap Change Wi-Fi Network. From the list of networks, choose the one that you want to connect to. Some devices may offer a different option, called Reconnect to Wi-Fi.

How do I change the WiFi on my blink camera?

To start, tap the settings icon for the Mini camera you want to change. From the the Camera Settings screen scroll down to the bottom and tap Change Wi-Fi. In the Change Wi-Fi screen, follow the instruction to “Press and release the reset button on the camera until red and blue lights flash.

Can I use the same Wyze account on two phones?

There is no limit to he number of Wyze devices you can share. The sharing feature is set per camera. To share multiple devices, you’ll have to invite users to each manually.

How do I reset my WYZE camera?

With the Wyze Cam Pan plugged into power, press and hold the setup button on the bottom of the camera for 10 seconds. This will reset the camera. Wait at least 30 seconds for the unit to initiate. This process can take up to 5 minutes.

How do I fix my offline camera?

You can reset your home router and/or modem. A) Power off the camera (unplug the camera, or hold the button down for 5 seconds until the lights turn off; press it to turn it back on after about 1 minute.) 3. If the camera is still offline, you can factory reset your camera.

Why does my IP camera keep going offline?

Occasionally, your camera may go offline due to network connectivity.Even if your camera is not too far from your router, there may be different materials (walls, floors, metal, concrete, plaster) that can block the WiFi signal. Minimize the number of physical obstructions between the camera and router.

Why do my WYZE cameras go offline?

Troubleshooting: Try power cycling your camera by unplugging for about 30 seconds and plugging it back in. Reboot your router.

How far can WYZE outdoor cam detect motion?

The maximum signal range for the Wyze Outdoor Camera from the Base Station is up to 300 Feet. However, this range is for a completely unobstructed signal and may vary depending on certain factors.

What is person detection on WYZE?

Person Detection is a service that works with your Wyze Cam and the Motion Detection feature to detect people in your event videos. Not your cat strolling past, or a tree rustling in the wind, but people who enter the area in front of your Wyze Cam. Supports: Wyze Cam v2 and Wyze Cam Pan.

Where is setup button on WYZE Cam?

To set up your Wyze Cam or Wyze Cam Pan:

1. In the Wyze app, tap Home, then tap + plus sign on the top left.
2. Tap Add Device.
3. Tap Cameras > Wyze Cam or Wyze Cam Pan.
4. With your camera plugged into an outlet, tap Next in the app.
5. Pull the base from your camera and single-press SETUP on the bottom of the camera.

How do I connect to 2.4GHz instead of 5?

To connect to a 2.4GHz network, go to Settings ( )>Wi-Fi. In this menu you will see all detectable networks in your area. Locate the SSID for your network, and tap on the SSID with the 2G or 2.4 end notation. Connect to that network using the Wi-Fi password associated with your network.

How do you check if your WiFi is 2.4 or 5?

1. Connect to the WiFi network.
2. Open your networks panel from your taskbar (click the WiFi icon in the bottom right).
3. Click on “Properties” of your WiFi network.
4. In the new window that opens, scroll all the way down to “Properties”.
5. “Network Band” will either say 2.4GHz or 5GHz.

How do I enable 2.4GHz and 5GHz on my router?

Click the Wireless tab.

1. Under the Basic Wireless Settings sub-tab, select Manual.
2. NOTE: Select either the 2.4 GHz or 5 GHz band.
3. For the Linksys Wi-Fi Routers, you may enable either the 2.4 GHz or 5 GHz band, or both by setting the Network Mode to your desired standard (i.e. Mixed, Wireless-N Only, etc.).

How do you change your wireless Internet password?

How to Change Your WiFi Name and Password

1. Open a web browser.
2. Then type your router’s IP address into the search bar and press the Enter key.
3. Next, enter your router’s username and password and click Sign In.
4. Then click Wireless.
5. Next, change your new WiFi name and/or password.
6. Finally, click Apply or Save.

Where is the smart network switch?

With Mobile Data enabled, go to Menu > Settings > Wi-Fi. Tap the action button (More button on some Samsung devices). Tap on smart network switch. Set it on OFF if you want it disabled or ON if you want to enable Smart network switch.