Change the master code. The master user should be listed as the first user at the top of the user list. Select the master user to continue. On the next screen, select “change pin”. You will be prompted to enter a desired 4-digit code that will be used as the new master code.
https://www.youtube.com/watch?v=CeXhoQE9ii4
What is Vivint master code?
Question 9 What is a Vivint master code? Answer: The default master code is 1111. On the Vivint 2GIG GC2 model, simply go to security, and from there to the menu and to toolbox and enter this default code to reach the user management point.
How do I reset my Vivint security PIN?
To change a user PIN online, follow the steps below:
- Go to www.alarm.com, and click Login.
- Enter the same email and password you use for your Vivint account.
- Click Users.
- The PINs will be hidden from view.
- Click on the user’s name to access and edit their PIN.
How do I add Z wave to Vivint?
At the Vivint panel, press the Home button, then select the three dots in the bottom right-hand corner of the panel. Select Software Version and enter the 4-digit code that appeared in Site Manager after unlocking the Installer Toolbox. Select Smart Home Devices > Z-wave > Add Node. Turn on the physical light switch.
How do I reset my Vivint sky panel?
Line up the BOTTOM of the panel to the backplate and snap it back in place. Replace the top screw and plug the panel back into the wall. After 10-15 minutes, the panel should finish powering on.
How do I turn off vivint alarm without code?
To disarm your alarm, Touch the Shield icon on your home screen and drag it down to disarm. 4. Press the alarm icon in the middle to disarm the system and cancel the alarm if there is an alarm in the process.
What is a Z-Wave switch?
Z-wave switches are one you can control your home lighting from your smart phone, Alexa, or Z-wave controller interface. The configuration options for your lighting are endless.
Will any Z-Wave work with vivint?
Vivint equipment compatibility overview
Vivint is compatible with Amazon Alexa, Google Home, and Z-Wave devices like smart locks, thermostats, smart speakers, and smart outlets.
Can I add my own camera to vivint?
Vivint does not allow the addition of third-party cameras to a home’s Vivint security system; users are required to use only Vivint-compatible equipment. However, Vivint does provide users the option to add up to four Vivint security cameras to their security system for an extra monthly fee.
How do I change my PIN on my Vivint panel?
To change user PINs, watch the video or follow the steps below:
- From the home screen of your Go! Control, tap Security.
- Tap Menu.
- Tap Toolbox.
- Tap User Codes.
- Enter your 4-Digit PIN.
- Choose the user you would like to edit.
- Enter the new PIN in the field provided.
How do I update my sky vivint panel?
From the Panel
- At your panel, open your menu by pressing the 3 dots in the corner.
- Select General.
- Enter your PIN.
- If your panel is already on the latest update, the option will be grayed and say “Panel is up to date.” If not, it will list the newest firmware option next to Software Update and allow you to select it.
How do I reset my vivint thermostat?
Factory Reset
- From the Home screen, press and hold the SIDE button for three (3) seconds.
- Press DOWN to highlight Installer, then press the SIDE button.
- Press DOWN to highlight Reset, then press the SIDE button.
- Press DOWN to highlight Reset, then press the SIDE button.
How do I disarm alarm without code?
Access the Main Control Panel of Your Alarm System
- Remove the AC power to the home alarm console from the wall directly.
- Use your console’s access key (or another item such as a small screw) to unlock and open the system’s backing.
How do I get rid of Vivint?
If you wish to cancel your agreement with Vivint, call 1-800-216-5232 x5020 for assistance. At Vivint, we understand that sometimes the unexpected happens. We also know that when the unexpected happens, changes must be made in your life.
Can the panel duress code be changed Vivint?
Your Vivint system will have a default duress code programmed to the panel. If you do not remember your duress code, you can check it on your panel by accessing your users and tapping on the duress user. We recommend that you do not change this code so that Vivint can assist you.
Is Z-Wave going away?
The short answer is no, the standard is far from dead and still receives a lot of updates from its creators. Many different standards can exist at the same time without putting one another entirely out of the game.
Do I need a Z-Wave hub?
Do I need a hub? Yes – to get the most out of your Z-Wave device, a Z-Wave Certified hub is required to set schedules and control remotely away from the home, which a handheld Z-Wave controller cannot do. You can visit our Z-Wave website for more information on compatible hubs.
What do you do with old Vivint equipment?
Is the equipment mine to keep? If you bought the house and the equipment is still in there, then it is yours to keep. If the previous owner failed to move the equipment with them and still owes money on it then they will have to settle it with Vivint.
How do I connect my Vivint to Kwikset?
To add a thermostat, door lock, or module to your system, complete the following steps:
- Go to your touchscreen panel and touch the home button.
- Tap Services.
- Tap the wrench icon.
- Enter your 4-digit PIN.
- Tap Add Devices.
- At this point, go to the device you want to add (door lock, thermostats, light module, etc.).
How do I program my Vivint thermostat?
Smart Home App – Adjust Thermostat Schedule Settings
- Tap the thermostat icon on the bottom navigation bar of your Vivint Smart Home app.
- Tap the settings icon in the top right corner.
- Select Schedule preferences to adjust the temperature settings for weekdays and weekends.
- Adjust the schedule as desired.
Can you have 2 Vivint panels?
Users can have up to four of the Vivint Secondary Panels installed, in a customized configuration that best addresses the needs of each unique situation.
Contents