Open up the August App. Select the house from the keychain.
If you want to update an existing personal entry code, follow the steps above, then:
- Select the Entry Code you wish to change.
- Enter a new code or update the existing code in the entry code field.
- Select the back arrow or save changes.
- Select SAVE CHANGES.
Where is the QR Code on August Smart Lock?
The QR Code is located on the inside of the front battery cover. To remove the cover, simply press down on the August logo located at the bottom of the face plate.
How do I connect my august lock to WIFI?
Android
- Open the August App and select the associated Home from your Keychain.
- Select the gear icon to navigate to Lock Settings.
- Select the associated device to open Lock Settings.
- Scroll to the Utilities section and select Connect to Wi-Fi Network.
- Select BEGIN WI-FI SETUP.
How do I calibrate my August Smart Lock?
Smart Lock Needs Recalibration
- Open the August App and navigate to the affected lock.
- Select Lock Settings.
- Scroll to and tap on Calibrate Lock.
- Follow in-app instructions to recalibrate.
How do I change the code on my electronic door lock?
First, open the door and lift off the lock’s interior cover. Press the Program button once and you should hear your unit beep five times and see its checkmark icon at the keypad’s bottom left flash five times. Press the checkmark once and then enter the master code.
How do I change my digital door lock password?
Open the battery cover and press the [Registration] button briefly. Enter the master password (default is ‘1234‘) and press the [*] button. Enter the new master password and press the [*] button.
Why is my August keypad not working?
If you find that the issue is the lock, try rebooting the lock first. To reboot the lock, remove one battery from the lock and replace it. Once you have rebooted the lock, try the entry code again. If this does not work, the keypad must be reset.
Does August lock work without wifi?
Do August smart locks work without Wi-Fi? Yes, August smart locks can be operated without Wi-Fi as they can also connect via Bluetooth or Z-Wave. However, you need Wi-Fi if you’re looking to control your lock remotely. If you’re still curious about how the August smart lock works, you want to continue reading.
How do I turn off smart network switch?
Enabling / Disabling Smart Network Switch on Samsung devices
- With Mobile Data enabled, go to Menu > Settings > Wi-Fi.
- Tap the action button (More button on some Samsung devices).
- Tap on smart network switch.
- Set it on OFF if you want it disabled or ON if you want to enable Smart network switch.
Why does my august lock lose WIFI connection?
As you probably know, the August Wi-Fi Smart Lock does not support the 5GHz Wi-Fi network band, but 2.4GHz. So if your lock keeps losing connection, chances are you have a dual-band router, and it automatically switches between the two bandwidths (5GHz and 2.4GHz).You can do this via your router’s Wi-Fi settings.
How do I fix my august lock?
Below are steps on how to fix it:
- Taking the smart lock off of your door and turning it on its back.
- Undo the latches on both sides to remove the metal cover and use a Philips #0 screwdriver to take off the cover.
- Take out the gears and replace them to get your smart lock working again.
Can you manually unlock August Smart Lock?
Here’s the genius of the August Smart Lock, though: It replaces the interior portion of your currently installed deadbolt. Nothing changes on the outside of your door, and you can still manually open the door from the inside by simply turning the outer rim of the Smart Lock, just like you would a door knob.
How do I reset my Aug module?
How to Reset Your Connected by August Module
- Open the August App while you are in Bluetooth range of the lock.
- Go to House Settings and select the host lock.
- Open Lock Settings.
- Scroll to Factory Reset.
- Select RESET.
How do I change the 4 digit code on my Schlage keypad?
Press the Schlage button and the number 1 button simultaneously to add/change a new entry code. Wait for the Schlage button to beep and flash three times. Enter a new four-digit code, and wait for the Schlage button to flash and beep three times. Re-enter the same four-digit code to confirm the change.
How do you reset the code on a August keypad?
How do I find the code to reset my Smart Keypad?
- Open the August App.
- Go into the Keypad Settings menu.
- Select DISCONNECT to remove the Keypad from the Lock.
- This action triggers the system to send your unique reset code.
- Enter that into the keypad to complete the reset.
What is August DoorSense?
With DoorSense on your door, your August Smart Lock can detect when your door is open or closed in addition to whether or not the deadbolt is locked. If you accidentally leave the door open as you are rushing to work in the morning, you will receive an alert through the August app.