How Do I Attach A Print Mount?

What is a backing board?

Backing boards are a supportive board that goes directly behind your art. It gives your artwork rigidity. For example, a poster might naturally want to sag or buckle, but a backing board will help sandwich the thin poster paper in place.

How do you mount a floating print?

1. Step 1: Cut the mat board to the size of the frame.
2. Step 2: Mark where you want the picture to go.
3. Step 3: Cut a slit a little narrower than the picture.
4. Step 4: Apply hinging tape to the back of the picture.
5. Step 5: Slide tape through the slit and secure on the back.
6. Step 6: Frame the picture and add spacers.

What is a backing mat?

Backing boards come in any size. Backing is used to provide support and protection for your artwork, either in a picture frame or as a standalone product in a show kit.The larger your artwork, the more support you need. Foam is much thicker than the economy backing and is the most popular for use in.

When to use a mount in a frame?

A mount is a great way to provide a level of ‘breathing space’ in between your artwork and the frame itself. This is especially useful in situations where your artwork is very close to the edge of the medium it is printed on. Let’s say you have a print which is exactly A4 (210 x 297mm to be precise) in size.

How do you hang art?

We find it’s best to hang single artwork at eye level, and 60 inches from center to the floor is the magic number. If you’re hanging your art above furniture, it can be 4-6 inches above the piece. If the art is going above a sofa or console, the piece should be approximately 2/3 width of the furniture.

How do you mount a print on wood?

How to Mount Artwork to a Piece of Wood

1. STEP 1: Seal the wood. First, the wood should be sealed.
2. STEP 2: Glue the paper to the wood. Make sure to use a pH neutral or acid free glue, such as PVA glue.
3. STEP 3: Seal the Drawing (this step can be done before Step Two) To seal your artwork, use a varnish or spray sealer.

How do you attach poster to Wood?

Quickly pour some Mod Podge on the face of your plywood and spread it evenly. Place the poster onto the plywood surface. If you put enough Mod Podge, you will be able to shift and slide it around to line up with the edges of the poster. Next, smooth out the poster and get as many bubbles out as you can.

How do you Modge podge a poster?

It dries clear and is ideal for adding texture to slick surfaces such as posters.

1. Lay a piece of cardboard on a flat surface. Place your poster on top of the cardboard.
2. Pick up your poster, and set it aside.
3. Remove the poster.
4. Brush Mod Podge over the poster — applying it in even, vertical strokes.

What material is used for picture frame backing?

A dust cover, also called backing paper, is a thin sheet of paper attached to the back of picture frames. Professional picture frames will often refer to using this framing material as a “dust seal,” as the adhered paper prevents dust from entering the picture frame.

What can I use for frame backing?

Depending on what you’re framing; you can use cardboard, standard foam board, acid free foam board, mat board, hard board, chip board, easel backs, or what the heck, you can even use wood.

What is a float mount hanger?

Float Mount: This option looks like it is literally “floating” about a half inch off of the wall. There is a hanger on the back which you can use to hang the image with a nail or picture hanger. Float mounts are usually recommended for smaller sized images but can also work well for most sizes.

What can you use instead of mat board?

Crisp white matboard might be the most traditional way to give your art that gallery-quality look, but don’t be limited by it. Scrapbooking papers (a wide selection can be found at any craft store), recycled, vintage papers (see above!), or even swatches of thick fabric can all be used to mat art and photography.

What is a picture mount board?

In the picture framing industry, a mount board is a thin, flat piece of coloured card included within a picture frame, which serves as additional decoration and to perform several other, more practical functions such as separating the art from the glass.

Is mat board the same as foam board?

Unlike mat board, mount board is generally made of foam — often polystyrene — with a smooth, sometimes paper-based face on either side. Some mounting boards, like the Artcare AlphaRag cotton mounting board, do not use foam in order to enhance the ability to preserve the artwork.

What kind of tape do you use for matting?

Hinging Tapes
Archival Methods generally recommends two types of tape for hinging mats: self-adhesive Tyvek Tape and moisture-activated Linen Tape. Tyvek Tape is easy to use, as you just cut the length you need, peel off the backing, apply it to your mat and backing board, and burnish it down with a Burnishing Bone.

How do you hang art on top of a mat board?

Flip your artwork over and carefully center it on the uncut matboards. Do not press down on the hinged area until it is properly centered. Using a tape measure to check the border sizes is the most accurate way of centering. Once your artwork is centered, gently smooth the top edge of paper to create the adhesion.

Is it OK to frame a print without a mat?

If you just put a print into a frame without a mat or spacers, contact with the glass can cause sticking, buckling, newton rings, and a variety of other problems. The trick is to use spacers to create an air gap between the print and glazing (glass or acrylic).

What is a matted print?

Matted prints are likely more familiar to most, since they are commonly seen in framed pieces across the globe in family homes. The difference to those already in the frames, is that these prints come encased in the mat, rather than it just being a pretty topical piece for the frame.

What does with mat or without mat mean?

If you are framing a large poster, no mat allows a more modern, edgy look. Photographs, whether large or small, are often complemented by the addition of a mat. A mat can give an elevated or sort of “focused in” look to the photograph.