Test Sensitivity: Click and drag across the screen to simulate movement to ensure your sensitivity settings will pick up movement. Save: Select to save any changes to your sensitivity or motion grid settings. Close Menu: Closes the Sensitivity Menu. Right click on the mouse to restore the menu.
How do I set motion detection sensitivity?
Click on Video motion detection. Click 1, 2 or 3 to select the corresponding window. Use the mouse cursor to draw the VMD window in the areas where you’re looking to capture motion. Adjust the sensitivity of the VMD by selecting from a range of 1 to 10 (10 being the most sensitive).
What sensitivity should I use for security cameras?
It is recommended to select a Sensitivity between 30~70. Threshold determines how much motion is required to trigger an event. If the amount of motion exceeds the threshold, an event occurs. It is recommended to select a Threshold between 10~50.
What is motion detection holding time?
Holding Time: The time, in seconds, that need to pass after detecting motion before ending the alarm. If it continues to detect motion during that time, it will treat it as part of the same alarm and continue the alert until no motion has been detected for the Holding Time.
How do you reduce motion sensor sensitivity?
Use masking tape around the sensor for a temporary adjustment and locate the area which works for your sensitivity. Then for a permanent solution remove the tape and just paint over the area where the masking tape was placed.
How do I set motion detection on my DVR?
(DVR) – Motion Detect Setup & Recording
- Go to Video Detect.
- select a channel and check Enable MD (Motion Detection). Set region setting that will apply motion detect, it works on the whole image by default.
- Go to Schedule, change every color bar to MD (Yellow)
What is holding time on ZOSI motion?
Holding Time: Set recording time length after motion stops. Trigger: Multi-channels can be set to record when moving objects with temperature are detected by one of cameras. For example, when camera 1 detects motion, camera 2 and camera 3 can be triggered to record as well.
How far away can a security camera detect motion?
A good motion detection camera can detect human movement at 15 feet from the camera, and you can adjust this sensitivity to suit your needs. Before you go out to buy a motion detection camera, you should take care of this important feature.
What is ZOSI smart detection?
Set motion detection, the instant push notifications and email alerts will be sent to your phone via ZOSI Smart App directly as long as the cameras detect moving objects, and buzzer in DVR/NVR triggered by motion will make a sound warning, it will help you monitor smarter and keep you connected to what you cared while
What is sensitivity threshold?
Threshold sensitivity: the minimum write beam intensity required to record an image on the read-out beam.This time is limited by the decay or erasure of the recorded image.
How do you stop bugs from triggering motion cameras?
Keep Your Security Cameras Bug-Free
- Apply lubricants to the outside case of your camera.
- Attach a dryer sheet to the camera.
- Disable the LED lights.
- Loop a flea collar around your camera.
- Spray bug repellent around cameras.
- Sweep camera areas weekly.
- Use a fan to prevent spider webs.
What is the relationship between sensitivity and threshold?
Think about it this way: sensitivity is a measurement of the amount of change in a camera’s field of view that qualifies as potential motion detection, and threshold is how much of that motion needs to occur in order to actually trigger the alarm.
How do I watch playbacks on ZOSI?
Login your Zosi Smart app as you previously registered.
- Select “Device”
- Select the channel and open it, press “Playback” to view all your video playback.
- Choose the specific date and time you would like to review or manually drag to the timeline to view the playback.
- View your recordings:
- Select “Media”
- FAQ:
What is the default password for ZOSI DVR?
In the DVR login screen input the username admin and the Super Password that was created by the SPD App and press the login button. Next time you reboot the DVR, the username will be admin with blank password.
How do I turn on ZOSI DVR?
8. Powering the DVR On Follow
- Connect the DVR Power Adapter (12V/2A power adapter) to the DVR.
- Plug the DVR Power Adapter into a surge protector or wall outlet.
- Your Zosi DVR will automatically power on.
- notifying you that it has been successfully powered on.
- Please allow the DVR a moment to boot up.
How can I reduce the range of my PIR Sensor?
cover the PIR sensor with transparent plastic with different color (green ,red, yellow, orange, white), it can reduce the range of my PIR sensor, but also make it very un-reliable. I have also tried cover the sensor with combination of different color, and/or multiple layers, same result.
How can I increase the range of my PIR Sensor?
It is possible to make PIR more sensitive or Non-Sensitive Enough. The maximum sensitivity can be achieved up to 6 meters. Time Delay Adjust potentiometer is used to adjust the timetsel shown in above timing diagrams. Clockwise Movement makes PIR more Sensitive.
What is sensitivity in PIR Sensor?
PIR Sensor Components ? Sensitivity Adjust knob: The sensitivity adjust knob determines the distance (range) of motion detection of the sensor. It can be made to vary between 3 meters and 7 meters. The view area of the sensors is typically 110 degrees.
How do I set up ZOSI DVR for email alerts?
Zosi email alert setup (Quick and easy)
- Your Zosi DVR or NVR can send you emails just like the one below:
- Right-click the DVR/NVR main screen and click “Main Menu”
- Click the “Network Button”
- Click the “Email button”
- Fill all the information for the SMTP server.
- Click the “Test Button” and check if it works.
How do you set up a motion?
How to setup Motion detection ?
- Step 1: Tap the Wi-Fi camera.
- Step 2: Tap Settings on the camera main feature menu.
- Step 3: Tap Motion Detection.
- Step 4: Place a Check next to Enable Motion Detection to turn on.
- Step 5: Tap Active Areato select the area you want the camera to detect motion.
What is DVR motion detection?
Motion detected recording is a feature on all our DVR recorders. The DVR monitors camera images and decides when it thinks there is movement.To help minimise false triggers it is possible to limit where on the screen the DVR looks for movement and limit this to a small area or a number of areas.
Contents