After pressing the top of the monitor, push the lock button towards right, then you can adjust the height of the monitor.
How do I move my Acer monitor up and down?
To adjust the height you’ll need to unlock it using a switch on the back of the monitor.
- Stand the monitor upright. Video of the Day.
- Face the back of the monitor and look for a lock switch at the base of the stand.
- Slide the lock to the right to allow the height to be adjusted.
How do I change the position on my Acer monitor?
To optimize the viewing position, you can adjust the monitor tilt by using both of your hands to hold the edges of the monitor as shown below. The monitor can be adjusted to 25 degrees up or 5 degrees down. Note: Remove the monitor and monitor base from its packaging.
How do I adjust the tilt on my Acer monitor?
The screen will tilt forward 5 degrees and backwards 15 degrees. The best way to do this is have one hand on the upper bezel and one on the bottom. Push back on the top edge as you pull forward on the bottom, to tilt it back.
How do I setup my Acer LCD monitor?
Turn off your computer and unplug your computer’s power cable. Connect the VGA cable’s blue connectors to the monitor’s signal connector and blue video connector on the back of your computer. Insert the monitor power cable into the power port on the back of the monitor. Turn on your computer and monitor.
How do I adjust the sharpness on my Acer monitor?
Please open Acer eColor Management using the menu button on the monitor and check if the Super Sharpness option is turned On. Super Sharpness adds in a slight amount of edge enhancement.
What is OD Acer monitor?
Answer: Response time overdrive allows you to push the monitor’s response time speed (pixel transition time) in order to decrease the trailing/ghosting artifacts behind fast-moving objects. Depending on the refresh rate, too strong overdrive can cause pixel overshoot or inverse ghosting.
Touch-sensitive buttons are often found on the front, bottom edge. Power – Turns the monitor on or off. Brightness – Using this button or wheel the user can increase and decrease the brightness on the screen. Contrast – Using this button or wheel can increase and decrease the amount of contrast on the screen.
The instructions start on page 10. Pushing the menu button brings up the on screen display and then the bottom bar provides the corresponding options.
Assistance by Acer.
| Drivers & Manuals | Acer Answers |
|---|---|
| Get Product Information ( only) | Acer Support Videos |
Can you raise Acer monitor?
In oder to optimize the best viewing position, you can adjust the height/tilt of the monitor. After pressing the top of the monitor then you can adjust the height of the monitor.
How do I adjust my monitor brackets?
Adjusting the Monitor Swing
- Find the small hex bolt on the monitor mounting bracket.
- When the tension is loose enough to allow you to move the monitors, swing them left or right to position them where you want them.
- Turn the Allen Wrench clockwise to tighten the swing tension and keep the monitors in place.
How do I change the angle of my monitor?
Use the Crtl and Alt keys with any of the arrow keys to spin your display 90, 180 or even 170 degrees. The screen will go dark for a second before it displays your preferred setting. To switch back, simply press Ctrl+Alt+Up. If you don’t want to use your keyboard, you can opt for the control panel.
How do I tilt my monitor?
You can usually tilt your monitor by gently grabbing both the top and bottom and then pulling the bottom or pushing the top. Avoid simply turning the monitor without support. Many monitors are not designed to be turned, especially old CRT monitors.
How do I change my Acer monitor to HDMI?
Run your fingers until you reach the last to second button on the right side. This should have “Input” label. Press it. This should provide you the option to switch between HDMI or VGA (my options).
What is Acer super sharpness?
Super Sharpness adds in a slight amount of edge enhancement. While it might make graphic and video content appear sharper, the feature creates white outlines around black text in most applications. When you choose the User color temp, another click of the Select key brings up the RGB sliders.
What is VRB Acer?
VRB is Acer’s name for its motion blur reduction tool that strobes the backlight to insert a black image between frames to reduce blur in games.
What is VRB Acer monitor?
The VRB technology creates the effect of 1ms MPRT (Moving Picture Response Time). It does this by quickly turning off the backlight or inserting a blank, black image between frames aka “blinking”. This results in less noticeable blur when colors change quickly.
How do you reduce inverse ghosting?
How to fix monitor ghosting
- Monitor ghosting test. The first step to fixing any problem is to diagnose the issue.
- Turn on the overdrive function.
- Adjust monitor settings.
- Check connected devices and cables.
- Update graphics card drivers.
- Check monitor video port.
To navigate the On-Screen Display (OSD) menu, use the buttons on the monitor. The monitor control buttons are usually on the right side , either on the side, front or bottom of the monitor. To access the On-Screen Display (OSD) menu, press Button 3 on the monitor.
Max and Min Buttons. In Windows, almost all open windows have three buttons on the menu bar; located at the top of the screen. The far left button is the minimize button, depicted by a minus sign.
Contents