The Sensitivity setting of Reolink cameras is controlled by a slider, allowing you to set a value between 1 to 50. You may drag the slider to the left (right) side to set the motion detection sensitivity. The higher the level, the more sensitive the motion detection.
How do I change the angle on my Reolink camera?
If you want to adjust the angle of this camera, you can loosen the screw toward the direction of Unlock symbol.
Note:
- Twist it with the wrench to unlock, and adjust the cam (green part) in any directions.
- After adjustment, twist it back to lock it.
- Store the wrench here for later use.
How do I change the sensitivity on my Reolink?
How to Set up Motion Detection Sensitivity via Reolink App
- Launch Reolink App, then tap on the gear icon to go to the Device Settings page of the camera.
- Go to Alarm Settings-> MD Settings -> Sensitivity page to set up the sensitivity of motion detection.
How do I set motion detection sensitivity?
Click on Video motion detection. Click 1, 2 or 3 to select the corresponding window. Use the mouse cursor to draw the VMD window in the areas where you’re looking to capture motion. Adjust the sensitivity of the VMD by selecting from a range of 1 to 10 (10 being the most sensitive).
How do I set up motion detection Reolink?
Log in to your Reolink PoE NVR on a monitor. Go to Menu -> Recording -> Schedule page, then select the channel (camera) and check the Enable box. Select Motion and tap on the grids to choose the time that you want to enable motion detection recording for, and then click Apply to save the settings.
How do you reset a Reolink dome camera?
Press the Reset button and hold on, then power on the camera while pressing the Reset button. Step 3. Hold for about 10 seconds then release the Reset button. After reset, your camera will return to factory default settings, then you can log in with the default username and password.
How does Reolink Argus work?
The Reolink Argus 2 runs on a rechargeable lithium-ion battery.The camera has a motion sensor built in, and it conserves battery life by recording to a micro SD card only when it detects motionit doesn’t run continuously. The app lets you set up alerts so you get a push notification whenever it senses motion.
How do you stop bugs from triggering motion cameras?
Here are a few ideas:
- Apply lubricants to the outside case of your camera.
- Attach a dryer sheet to the camera.
- Disable the LED lights.
- Loop a flea collar around your camera.
- Spray bug repellent around cameras.
- Sweep camera areas weekly.
- Use a fan to prevent spider webs.
Do all Reolink cameras have motion detection?
Applies to: All Reolink cameras except battery-powered cameras. The Sensitivity setting of Reolink cameras is controlled by a slider, allowing you to set a value between 1 to 50.
What is mask on Reolink?
The mask is to disable parts of the picture for motion detection.
How do I make my sensor less sensitive?
Use masking tape around the sensor for a temporary adjustment and locate the area which works for your sensitivity. Then for a permanent solution remove the tape and just paint over the area where the masking tape was placed.
What is high motion sensitivity?
There are 3 sensitivity levels of motion detection. High – The camera records videos when it detects a small motion, such as yawning or stretching.Low – The camera records videos when it detects a large motion, such as children are chasing or jumping around.
What is backlight on Reolink camera?
Backlight?: Optimize brightness and contrast levels to compensate for differences between dark and bright objects using either BLC or WDR mode. This may improve image clarity in high contrast situations but should be tested at different times of the day and night to ensure there is no negative effect.
How do I Reolink playback?
Note: The playback interface may vary depending on the specific camera model. The following steps describe how to playback recorded videos via a web browser. Step 1.
Why has my Reolink stopped recording?
Cause 1: The Motion detection or PIR settings are not set up properly. Cause 2: Abnormal function of motion detection or PIR sensor. For Reolink battery-powered cameras, please enable Siren and manually trigger the camera.
How do I reset my Reolink camera?
You may follow the steps below to reboot your camera or NVR via Reolink App.
- Launch your Reolink App, go to Device Settings-> Advance page.
- Find the Reboot button and click it, and then click OK to reboot it.
How do I reset my Argus Reolink camera?
How to Reset Argus PT
- Turn ON the power button to power the camera.
- Rotate the lens to find the reset hole. And then insert the reset needle into the reset hole of your camera.
- Press and hold for several seconds until you hear the prompt Factory reset succeeded.
How do I reset my NVR to factory settings?
To factory reset the device, hold the reset button down and unplug the NVR from power. Once power is removed from the unit, continue holding the factory reset switch for 4 – 5 seconds, continue holding the reset switch and plug the power supply back into the unit. You should hear a beep if not that is alright.
How long do Reolink cameras last?
Reolink Argus battery-operated security camera could sustain up to 6 months standby on a single charge and it’s designed to last up to months with normal usage. Reolink Argus is powered by four GP CR123A non-rechargeable lithium batteries (1,600 mAh per battery), which are shipped out together with Reolink Argus.
Which Reolink camera is best?
Reolink Argus 3 Pro
Reolink Argus 3 Pro: Best overall
The Reolink Argus 3 Pro is our favorite Reolink camera because it’s essentially a budget version of the Arlo Pro 4, our top pick for wireless cameras. It shares many of the same traits as Arlo: 2K video quality, portability, and a bright spotlight.
Are Reolink cameras good?
With an intuitive app, plenty of customization options, reasonable prices, and reliable equipment all very crucial factors we think that overall, Reolink is a great option to consider for home security.
Contents