How Do I Add Devices To My Iq Panel?

How do I add Z-wave device to IQ panel?

IQ Panel 2 – Add Z-Wave Device

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS.
2. Press ADVANCED SETTINGS then enter Installer Code 1111.
3. Press INSTALLATION then DEVICES.
4. Press ADD DEVICE then PAIR.
5. IQ Panel 2 enters Z-Wave learn mode.

How do I add camera to IQ panel?

Navigate to the Video Menu on the left side of the screen. Find the camera you want to stream to the IQ Panel 2 System, and click on the gear icon in the upper-right corner. This is the settings button. Choose “Stream Video to Security Panel Screen”.

How do you program an IQ panel?

Complete the following steps to program a Qolsys IQ Panel 2 System:

1. Enter auto enrollment mode. Start from the main screen of the IQ Panel 2.
2. Enroll the sensor. Make sure the wireless sensor you are trying to enroll is compatible with your IQ Panel 2 System.
3. Configure the zone.
4. Return to home screen.

What is the installer code for IQ panel?

1111
The Installer Code (default 1111) on a Qolsys IQ Panel 2 Plus has the second-highest authority level on the system, after the Dealer Code (default 2222). You can use the Installer Code to change most system programming settings.

Can I connect ring to IQ panel?

Yes, the IQ Panel 2 is very versatile. It has Bluetooth and Wi-Fi capability so you can add your Ring doorbell, smart thermostat, and other smart home devices to your home security network.

How do you find the doorbell on an IQ panel?

Using the Video Device dropdown menu, select the Alarm.com Doorbell Camera’s name. Click Video Device Info. Click to select Send motion notifications to panel and/or Send button pushed notifications to panel as desired. Click Save.

How do you put a doorbell camera on alarm com panel?

Here’s how to enable the Live Video Cameras and Doorbell Camera streaming to the control panel screen. Log into www.alarm.com user web portal. Go to Video –> Settings –> Stream Video to Security Panel Screen — Select each camera you want to stream to the panel. Up to 40 cameras allowed.

What devices work with alarm com?

Here are the following types of devices and partners you can choose to have installed and configured in your home:

• Smart Thermostats – Lux, Trane, Linear, Lennox and Radio Thermostats.
• Video Doorbells – Skybell.
• Sensors – image, temperature, motion and window (glass break)
• Door Locks – danalock, Yale, Schlage and Kwikset.

How many cameras can be attached to an alarm com account?

The maximum number of cameras that can be connected to a single Alarm.com account is 40.

Does IQ panel work with Alexa?

Yes, you can connect an IQ Panel 2 Plus to Alexa. To do this, the system will need to be active with Alarm.com. You can use the Alexa App to enable the Alarm.com Skill and link your Alarm.com account with Alexa. You will then be able to control the system using spoken Alexa voice commands.

How do I add photos to my IQ Bluetooth?

If you have an Android device, you can follow these steps to add your own photos to the IQ Panel 2 / 2+ via Bluetooth.

1. Swipe down to access the Settings Tray.
2. Tap Photo Frame.
3. Tap Add.
4. Tap the SD Card button to access the dropdown menu, and select Bluetooth.

What is the master code for?

Master Code: The master code can do everything the installer code can, except enter system programming, enter certain test modes, and program any installer-only schedules.The master code can always arm or disarm the system, regardless which code was used to arm, or if the system was quick armed.

What is the default installer code?

5555
The default installer code for a DSC is 5555. The installer code is the code that is used to get into the DSC programming mode so you can set the system up and make changes to panel programming. Having the installer code is the most important part of setting up the system.

How do I add skybell to IQ panel?

Connecting the Skybell to built-in Access Point – Qolsys IQ 2

1. From the Alarm.com app and go to drop-down menu – select Doorbell Camera.
2. Add Doorbell Camera.
3. Select Begin.
4. Name your doorbell device.
5. Go to your Wifi settings on your phone and select the Skybell Wifi.
6. Connect to the open network on your phone.

What is compatible with IQ panel?

*COMPATIBILITY BASED ON IQ PANEL SOFTWARE 2.5.1
The panel can pair up to 80 Lights, 20 Door Locks, 10 Thermostats, 6 Garage Door Openers, 15 Smart Sockets and 21 “Other” devices for a total of 152 Z-Wave devices.

How do I connect my camera to alarm com?

Add Camera to Alarm.com

1. From the customer website press Video.
2. Press Settings.
3. Press Add Video Device.
4. If the camera is found press Name then enter the camera name then press INSTALL.
5. Alarm.com sends information to camera, this may take up to 5 minutes.
6. When finished press Live View to view camera image.

Does Qolsys have an app?

The only mobile app that can be used with a Qolsys IQ Panel 2 Plus to control the system remotely is the Alarm.com Mobile App. This app allows you to arm and disarm your system, check its current status, control Z-Wave smart home devices, view Alarm.com Security Cameras, and more.

Can you add ring doorbell to alarm?

In this circumstance the recent wireless signal quality history is very consistently low compared to what is required. For the Skybell HD nothing under 90% quality will typically work well. The signal quality listed in your history fluctuates between 75% and 84%.

What smart locks work with alarm?

Alarm.com compatible Smart Locks

• Kwikset Obsidian. Touchscreen Z-Wave Deadbolt Lock.
• Yale YRL256. Assure Lever Lock with Z-Wave Plus and Touchscreen Keypad.
• Yale YRL236. Assure Lever Lock with Z-Wave Plus and Push-Button Keypad.
• Yale YRD226.
• Yale YRC226.
• Yale YRC216.
• Kwikset 888.
• August Smart Lock Pro.

What cameras can I add to alarm com?

All Alarm.com IP cameras, the 2GIG-HD100 and most analog cameras with a BNC connection (when attached to an Alarm.com video server) are compatible. The Alarm.com Video servers do not support the HDCVI (HD over Coax) input type.