How Do I Add An Apn To Reolink?

How to Import APN information to Reolink Go PT

1. Create a txt file named as “my_custom_apn”.
2. The file content is as below.
3. Upload the “my_custom_apn.
4. Turn off the camera, then install the SD card and power on the camera.
5. Once reset, you will see the status red led light flash 3 times during the factory reset process.

How do I add APN settings to Reolink camera?

Upload the attached file “my_custom_apn. txt” to the root directory of the SD. Before you do this, you have to decompress the file. Remove the battery from the camera, then insert the SD card (leave it in the camera) and reinsert the battery.

How do I connect my Reolink to the Internet?

How to Set up WiFi for Battery-powered Cameras via Reolink App

1. Launch Reolink App and log in to the battery-powered camera, then go to Settings->Network page.
2. Select the SSID (network name) you would like to connect the camera with.
3. Input the password, then click Save to save the settings.

How do I connect my Reolink NVR to Internet?

If you want to connect the NVR to your router via WiFi, please go to the NVR WiFi Setting page, then select the “Station” mode. After that, you may connect the NVR to your router’s wifi. And the SSID and Password (Station mode) in the picture below will be your router’s WIFI SSID/Password.

What carriers work with Reolink?

The Go is compatible with 3G W-CDMA and 4G LTE networks from T-Mobile in the U.S., as well as carriers in several other countries. It also works with a handful of T-Mobile MVNOs (mobile virtual network operators), including Cricket, Freedompop, Mint, Ting, Metro PCS, U.S. Mobile, and Tracphone.

Why does Reolink connection fail?

Check whether your computer has been connected to Internet successfully. Check if the computer’s firewall has been configured properly. If you haven’t set the VPN, please also close the VPN on your computer. Refer to How to Allow Reolink Client Pass Through the Firewall on your PC.

How do I change APN settings on Android?

How to change APN settings on an Android mobile phone

1. From the home screen, tap the Menu button.
2. Tap Settings.
3. Tap Mobile networks.
4. Tap Access Point Names.
5. Tap the Menu button.
6. Tap New APN.
7. Tap the Name field.
8. Enter Internet, then tap OK.

Why won’t my Reolink camera connect?

Click Add Device->Scan in LAN to see whether the camera shows up. For the mobile app, please check whether it has a firewall or APN settings, and disable the APN to add again. If still fail to add, please try to reboot this camera and your home router network or hard reset this camera and set up from factory status.

Why is my Reolink not connecting to WiFi?

1. Lumus, Battery-powered WiFi series cameras and E1 only supports 2.4GHz. It will not be able to connect to any Wi-Fi with 5GHz wireless frequency. Please make sure that your phone is connected to a 2.4GHz Wi-Fi network when setting it up.

How do I add another Reolink camera?

Launch Reolink App, click “+” on the top right of the Devices page to add a new device. Step 2. For local access, we recommend you to add device by scanning the QR code. Note: You may tap Light to enable flash light when setting up in a dark environment.

What port does Reolink app use?

The default media port for Reolink cameras is 9000. And it is used for streaming video when you access the camera via Reolink Client or Reolink App.

What Sim does Reolink use?

nano SIM card
The Reolink PT has one slot for a nano SIM card and another for a microSD card. The first empowers it to join T-Mobile’s LTE network, and the second provides the option of local storage.

What kind of SIM card do you need for a Reolink camera?

Applies to: Reolink Go, Reolink GO PT. If your local T-mobile has a strong 4G signal covered, we recommend one T-mobile (prepaid data-only SIM card). And we have tested virtual sim card like Mint and Freedompop(based on AT&T) which can work with our camera properly.

What kind of SIM card does Reolink go use?

Answer: The Reolink Go could support the prepaid AT&T sim card with cellular data, text, voice call, 3 in 1 SIM card. Please click the below link for details.

How do I update the firmware on my Reolink camera?

How to Upgrade Firmware via Web Browsers

1. Launch Reolink Client in a web browser and log in to your cameras/NVRs, then go to Device Settings -> System -> Maintenance page.
2. Select the correct file and click on Upgrade to update the firmware.

Why does my Reolink keep going offline?

Offline: the camera might be powered off or disconnect from the network.We need to reset the NVR and camera to see whether the status becomes into Previewing after that. Please try to reset the NVR and camera to check.

Can’t add or edit APN settings?

You need to go to mobile networks- network preferences and hit the three dot menu button. Click add and then operator list. You then add the carrier you want from the list. Then reboot and the apn for your new carrier will be there.

Where do I find my APN?

How do I check my APN (mobile internet) settings?

1. 1 Swipe up from the home screen, to access your apps.
2. 2 Tap the Settings app.
3. 3 Tap Connections.
4. 4 Tap Mobile networks.
5. 5 Tap Access Point Names.
6. 6 Tap the Access Point you would like to check.

What is my APN number?

If your carrier allows it, you can view your APN settings in one of the following locations: Settings > Cellular > Cellular Data Options > Cellular Network. Settings > Mobile Data > Mobile Data Options > Mobile Data Network.

How do I reset my Reolink camera?

You may follow the steps below to reboot your camera or NVR via Reolink App.

1. Launch your Reolink App, go to Device Settings-> Advance page.
2. Find the Reboot button and click it, and then click OK to reboot it.

How do I connect my Reolink camera to my phone?

How to Do Initial Setup for Reolink Go via Reolink App

1. Tap on the icon in the top right corner to start configuration.
2. Scan the QR code on the back of the camera.
3. Create the login password and click Next to continue.
4. Name the camera, then click the button Next to enter the next page.