How Do I Add A Device To My V380?

Add and Delete a New Device Press “+” to add a new device. V380 helps new starters to connect the camera to WIFI easily. Power on the new camera, enter WIFI SSID & password (the same WIFI as your smartphone has connectedto). Wait for connection.

How do you add a camera to a V380?

How to add the online device to your phone

1. Click the “+” button in the upper right corner of the device list -> select [Add Camera]
2. Select [WiFi Smart Camera] -> [Add device ID]
3. Fill in or scan the device ID as prompted by the system -> click [Confirm]
4. APP prompts “Completed”

How many devices can V380 connect?

V380 APP supports 4 cameras on one quad view on mobile devices(NVCMS software for Windows PC is the same), so you can mix stationary eweton ip cameras. Again, V380 APP supports 4 mobile devices to see 1 camera at the same time as long as network status permits.

Why wont my V380 connect to WiFi?

There are several reasons why V380 security camera can not connect WiFi: 1. You entered the wrong login password.WiFi coverage is too poor – IP cameras are too far away from the router.

How do I connect my V380 to my computer?

So let’s see how to realize it.

1. Install software on PC. Download the V380 IP camera’s official PC oftware.
2. Sign in the program. Single click right button of the mouse on the software icon to run the program as Administrator.
3. Add device.
4. Set the program and connect to the camera.
5. Watch live video on the program.

How do you record on a V380 Pro camera?

Pls kindly follow below steps to record video for V380 WIFI camera:

1. Plug in 32GB Micro SD card into the camera.
2. Format the SD card on V380 APP.
3. Restore the camera to factory default settings.
4. Replug in the Micro SD card again.
5. Open V380 APP, connect to wifi.

Why is my V380 Pro offline?

Your router must use 2.4GHz frequency mode to be compatible with our v380 camera.If the ip camera is still offline, there may be a problem with the home network. You can reset your home router. 6.

How do I find my IP camera MAC address?

You can see the IP Camera’s information in the search table. There is a column about the MAC Address. The third method is to login the IP Camera’s web GUI. Go to the device information page, you can check the IP Camera’s MAC Address.

How do I update the firmware on my V380 camera?

Method 1: Format your TF card to FAT32, then put the correct firmware to the root folder of the TF card and insert it to the camera. Press the reset button don’t release, and connect the power adapter, after 5 seconds, the camera’s LED starts to flick, release the reset button, now the camera is updating its firmware.

What is the default password for V380 camera?

The camera connects to WIFI successfully. Name the camera whatever you like, for example “V380123”, enter its password”123456” (default).

How do I find the IP address of my V380?

Remote View V380 IP Camera Tutorial:

1. First download and install the V380 APP to your mobile phone (use the mobile phone to scan the QR code on the package)
2. Open the “Settings” item on your phone, select “Wireless LAN” or “WLAN”, search for the router’s wireless network signal, and connect to the router.

Why won’t my IP camera connect?

Make Sure There Is No Signal Interference. If there is a bad reach, the IP camera can’t find your WiFi signal, and it cannot connect to the WiFi. The IP camera should not be too far from the router. Check the distance between the IP camera and the router.

What is the SSID for Wi-Fi?

From the Apps menu, select “Settings”. Select “Wi-Fi”. Within the list of networks, look for the network name listed next to “Connected”. This is your network’s SSID.

How do I connect my camera to my Wi-Fi?

(This can be done by going to the settings in your Android phone and turning on the “hotspot” function—usually called “mobile hotspot” or “portable hotspot”. Set a password for the hotspot connection.) Connect the camera to the Android phone’s hotspot-enabled Wi-Fi network.

Can I connect an IP camera directly to my computer?

You can connect your IP camera directly to a PC via network cable as long as you have a power supply to power up the camera and minimum skills for the setup.

How do I setup an IP camera on my laptop?

Here is how:

1. Get your security camera charged. Use the power adapter to get the camera plugged-in and charged.
2. Use the network cable to connect to the camera and the computer.
3. Scan and find out the security camera’s IP address on the computer.
4. Change the computer’s IP address to the same network prefix of the IP camera.

How can I use IP camera without PC NVR?

How to setup an IP Camera without DVR or NVR?

1. Step 1: Download the free security camera software provided by the manufacturer.
2. Step 2: Enter the camera UID and password to add the camera device (In order to improve cameras security, remember to change the default password)

How does the 1859 panoramic camera work?

In 1859, Sutton developed the earliest panoramic camera with a wide-angle lens. The lens consisted of a glass sphere filled with water, which projected an image onto a curved plate. The camera was capable of capturing an image in a 120 degree arc.

How do you play Sricam playback?

Sricam:How to setup microSD card record and playback

1. Insert microSD card to your camera. Note: please notice the MicroSD card direction when insert.
2. Format microSD card and Record Setting. Login “Sricam” App and follow the steps:
3. Setup the recording on microSD card.
4. Recording Playback.

How do you record a Sricam?

Log in “SriHome” App and follow the steps:Settings -> Record Setting -> SD card Formatting->Record Switch. There are 2 types of recordings? General recording: The camera captures all footage all the time. Alarm recording: The camera captures footage only when the motion detection alarm is activated.

What is preset PTZ?

So what is a preset position for a PTZ camera? Preset positions are a speed dome camera’s memorized P/T/Z and focus functionality. This means a user/operator can set the security camera to automatically look at a certain area in your CCTV application.