How Do I Add A Device To My Lts?

Posted on by

Adding and Viewing Devices

  1. Click the. (Menu) button in the upper left corner of the screen.
  2. Click Devices on the Menu that pops out on the left.
  3. Click. button in the upper right corner, & click Manual Adding.
  4. From here you will be prompted for your device information.

How do I get my LTS Connect verification code?

Register an account on LTS Connect with your mobile phone number. You will receive the verification code through SMS. You will use this code in the “Input Verification Code” section.

How do I connect my LTS camera?

Camera Setup

  1. Connect the camera and the NVR to the separate switch.
  2. Using the IP portal tool, find the LTS IP camera, select the device and activate the camera with a password of your choosing.
  3. Once the camera is activated, change the IP address to an address that is free on the network.

How do I add a device to CMS software?

Add a Device to CMS

  1. The CMS Software will search your local network to discover NVR units or Cameras.
  2. Enter a Name for the Device and the Device User Name and Password.
  3. When the Device is successfully added it will show under Device for Management Table.

How do I set up PT cloud?

Setting Up PT Cloud

  1. Run NVMS7000 Mobile App, Create PT Cloud Account. Create PT account with an email address.
  2. Login PT Cloud Account.
  3. After Login, Add your QR Code.
  4. Find the DVR/NVR:
  5. Completed.
  6. Next time running NVS7000, use PT Cloud Login.
  7. PT Cloud is setup is completed.
  8. Troubleshooting:

How do I get my hikvision device verification code?

Tap and tap Settings. Tap Change Verification Code, and then tap Edit on the pop-up Prompt to enter the Change Verification Code page. Input the old verification code, and then tap Next. Create a new verification code and confirm it.

See also  How Do You Make A Twitch Team?

How can I reset my hikvision verification code?

Change Device’s Verification Code

  1. Enter the Settings page of the device.
  2. Tap Change Verification Code, and then tap Edit on the pop-up Window to enter the Change Verification Code page.
  3. Enter the old verification code, and then tap Next.
  4. Create a new verification code, and then confirm it.

Where is my hikvision verification code?

Go to Remote Configuration->Network->Hik-Connect. 3. Click the device to view its verification code.

How do I connect my camera to my wireless router?

Simple steps to connect camera to WiFi network via PC or Mac:

  1. Connect camera to power using 12V DC power adapter and wait approx.
  2. Connect camera to WiFi router using Ethernet Cable.
  3. Download and install IP Search Tool (Platinum IP Portal) for PC/Mac from.

How do I make my wired IP camera wireless?

Using IP cameras with Wireless Access Points for viewing on WiFi enabled devices.

  1. Step 1: Set IP address on your security camera.
  2. Step 2: Connect the AP to your network.
  3. Step 3: Login to the AP.
  4. Step 4: Change default password.
  5. Step 5: Configure WiFi radio in Access Point mode.

How do I reset my LTS DVR password?

Resetting the Password

  1. Open the IP Portal first.
  2. Select “Forgot Password.” on the bottom right corner.
  3. A new menu will now present itself.
  4. Select Export and then designate the location the file will be saved to.
  5. Once you have the file.
  6. LTS Tech Support will reply email with the unlock file.

What is cloud PT?

PT Cloud is designed to enable remote viewing of DVR/NVR without configuring port forwarding on router. Please follow these steps on the local interface of the DVR to enable PT Cloud on your DVR for remote viewing.

See also  What Kind Of Ethernet Cable Does Arlo Use?

How do I add a device to hikvision?

How To Add Your Device and View Your Cameras With The Hik-Connect App

  1. Enter your CloudP2P (also known as Guarding Vision or Hik-Connect) credentials to login to your account.
  2. Tap the plus sign in the center of the screen to add a new device via QR Code.
  3. Use your phone’s camera to scan the QR Code.

How do I add a device to HIK-connect?

Add a Device by Hik-Connect Domain

  1. On the device list page, tap > Manual Adding to enter the Add Device page.
  2. Select Hik-Connect Domain as the adding type.
  3. Enter the device serial No.
  4. Tap to search the device.
  5. Tap Add on the Result page.
  6. Enter the device verification code.
  7. Optional: Tap Configure DDNS to configure DDNS.

How do I verify my device?

Confirm your identity using your Android device

  1. On your phone, find your Google Settings. Depending on your device, either:
  2. Tap Manage your Google Account.
  3. Scroll right and tap Security. Security code.
  4. You’ll find a 10-digit code.
  5. Enter the code on the phone you want to sign in on and tap Continue.

How do I create a verification code?

Set up Google Authenticator

  1. On your device, go to your Google Account.
  2. At the top, in the navigation panel, tap Security.
  3. Under “Signing in to Google,” tap 2-Step Verification.
  4. In the “Add more second steps to verify it’s you” section, under “Authenticator app,” tap Set up.
  5. Follow the on-screen steps.

What is security code in Hikvision DVR?

From there we can provide you with a security code to enter which will restore your password to the Default “12345”. Once you have entered the code, click confirm to complete the procedure. To provide you with a security code you will need to Copy and Paste the full serial number from SADP.

See also  Can A 17 Year Old Get A Drivers License In India?

What is Hik-Connect server address?

To do this we will navigate using the web-based GUI to Configuration >> Network >> Advanced Settings >> Platform Access and ensure that it is enabled and the “Platform Access Mode” is set to Hik-Connect, we will then ensure that the “Server Address” is ‘dev.eu.hik-connect.com‘ and press “Save”.

What is Hik-Connect service?

Hik-Connect is a new service introduced by Hikvision which integrates the dynamic domain name service along with alarm push notification service. It provides an easy way for devices to connect to the Internet. This manual is a guide for users to show them how to enable Hik-Connect service in device. Discretion.

How do I connect my wireless camera to my laptop?

How to connect a wireless camera to your computer?

  1. Plug your wireless security camera’s power adapter into an electrical outlet to turn the camera on.
  2. Log on to your PC.
  3. Open any standard web browser on your computer and enter the IP address of the camera into the address bar at the top of the window.

Contents

This entry was posted in Smart Camera by Alyssa Stevenson. Bookmark the permalink.
Avatar photo

About Alyssa Stevenson

Alyssa Stevenson loves smart devices. She is an expert in the field and has spent years researching and developing new ways to make our lives easier. Alyssa has also been a vocal advocate for the responsible use of technology, working to ensure that our devices don't overtake our lives.