How Do I Activate My Shaw Modem?

Activating your Shaw WiFi modem Attach one end of the coax cable to your modem and the other to the coax cable outlet. Attach the power cord from your modem into the electrical outlet. Once the coax and power cables are connected, your modem will activate automatically. The activation process can take up to 15 minutes.

How do I know if my Shaw modem is working?

How do I check if my Internet modem is online and functioning properly?

  1. If you have a BlueCurve Gateway, you should see a white solid light at the top corner. You can also verify your gateway status in the BlueCurve Home app.
  2. If you have one of the other Shaw modems, the first 4 lights should be solid.

How do I connect to my Shaw router?

Modem login instructions

  1. Open an Internet browser (e.g. Google Chrome) and locate the address bar.
  2. In the address bar, type in the following: 10.0. 0.1 and press the enter key on your keyboard.
  3. You will be presented with your WiFi modem login page.
  4. Enter the following information:
  5. Select the Login button.

How do I enable Internet on my modem at home?

How to Hook Up Your Internet

  1. Connect your modem. Before you power up your modem, you’ll want to connect it to your computer and your phone jack or cable outlet.
  2. Connect your router to the internet (optional)
  3. Test your internet connection.
  4. Set up your modem and network.
  5. Connect to a wireless network.

Why does Shaw Internet not work?

Power cycle your equipment
Restarting your equipment is often the quickest way to solve Internet connectivity problems. Unplug the power cord from your Shaw modem. Wait at least 30 seconds, then plug the power cord back into your modem. Wait a few minutes until the modem comes back online.

See also  How Much Resolution Is 4K?

Is my Shaw modem also a router?

Your Shaw modem acts as a router for your home, but if you would prefer to use your own third party router, you can.

Why is the modem blinking?

A blinking light means you are having difficulty connecting to the internet. Ensure all telephone cable connections are tight and secure and reboot the modem and router (if applicable). POWER: A solid green light indicates the unit is properly connected to power. A blinking red light indicates a possible modem failure.

What lights should be on Shaw modem?

Each Shaw modem has an online light, which should be a solid light when things are working well. If the online light is flashing, you may have a connection issue. Hitron modems: lit up ‘@’ symbol, located 4th light down on front. All other modems: 4 light down on front with ‘Online’ label.

Why is my new modem not working?

There are a lot of possible reasons for why your internet isn’t working. Your router or modem may be out of date, your DNS cache or IP address may be experiencing a glitch, or your internet service provider could be experiencing outages in your area. The problem could be as simple as a faulty Ethernet cable.

How do I enable my WiFi?

Swipe down from the top of the screen. Tap Internet. In the panel that appears, select a network.
Turn on & connect

  1. Open your device’s Settings app.
  2. Tap Network & internet. Internet.
  3. Tap a listed network. Networks that require a password have a Lock .

How do I reset my Shaw modem?

Locate the small pin-hole reset button located on the back of the Shaw WiFi Modem. Push and hold this button down for 15 seconds with a paper clip or pen. This will cause the modem lights to begin to flash and after a few moments, the modem will come back online.

See also  Does Lorex Camera Have Audio?

How do I access my modem settings?

Access the modem’s configuration page.
Open your Internet browser e.g. Internet Explorer, Firefox, Chrome, Safari, etc. and enter the IP address of your D-Link modem in the address bar: http://192.168.1.1. This should open the login page for your modem’s configuration pages.

How do I activate the router?

But if you want a general walk-through of setting up your home network, these steps should get you fully connected.

  1. Check Your Internet Connection.
  2. Place the Router.
  3. Connect to Power.
  4. Connect to Your Internet Source.
  5. Access the Router’s Web Interface.
  6. Connect Wired Devices.
  7. Connect Your PC or Device to Wi-Fi.

How do I restart my modem?

To reboot a modem:

  1. Unplug the power and Ethernet cables from the modem.
  2. Wait two to three minutes for the modem to fully power off.
  3. Reconnect the power and Ethernet cables to the modem.
  4. Wait for the Internet light to turn solid, then check if the Internet is working properly.

How do I connect my modem to WIFI?

Attach the modem to a router.
If you have a Wi-Fi router that you want to use in conjunction with your modem, plug one end of an Ethernet cable into the square port on the back of the modem, then plug the other end into the “INTERNET” (or similarly labeled) square port on the back of the router.

What do the flashing lights on my Shaw modem mean?

Flashing indicates the modem is scanning for network connectivity. When solid, these lights indicate that a connection has been detected. If flashing, this indicates that data is currently transmitting through this ethernet port. When light is solid or flashing, data is transmitting over the wireless network.

See also  Is Transferwise Safer Than Paypal?

How do I fix my offline modem?

What should I do if my network is offline?

  1. Check your modem’s Internet connection.
  2. You can check if your modem is connected to the Internet by connecting a device to the modem and seeing if you can still access the Internet .
  3. Restart the router to make sure it isn’t causing the issue.

Where is WPS button on Shaw modem?

top
Press the WPS button located on the top of the modem.

How do I connect my router to my bridged modem?

Bridge Mode is only supported for VDSL and Fibre connections.

  1. Connect your laptop or computer to one of the LAN ports on the gateway router using an ethernet cable.
  2. Type your username and password to sign in.
  3. Go to Internet settings.
  4. Edit the settings and select the Connection type as Bridged.
  5. Click Save.

How do I know if my modem is working?

Check the lights on your modem. The lights on the side of your modem can tell you whether or not your modem is connected to your router and the internet. If none of the lights on your modem are glowing, then your modem isn’t turn on, so you should check the power cable.

Why is my modem blinking orange?

f the cable light is blinking orange, your modem is connecting to the network.If it continues to remain blinking or solid orange, the modem cannot establish a connection to the internet. Check the cable line that screws into the back of the modem and make sure it is secure.

Contents

This entry was posted in Smart Camera by Silvia Barton. Bookmark the permalink.
Avatar photo

About Silvia Barton

Silvia Barton is someone who really enjoys smart devices. She thinks they make life a lot easier and more fun. Silvia loves to try out new gadgets and she's always on the lookout for the latest and greatest thing in the world of technology.