How Can I Add Reolink Nvr To My Phone?

How to Do Initial Setup for Reolink NVR via Reolink App

1. Applies to: All Reolink NVR.
2. Power the camera and the NVR, then launch the Reolink App on your phone.
3. During start-up, you will find the NVR shown on the Delive List automatically on Reolink App.
4. Click the device you want to add to start initialization.

How do I get Reolink on my phone?

Launch Reolink App, click “+” on the top right of the Devices page to add a new device. Step 2. For local access, we recommend you to add device by scanning the QR code. Note: You may tap Light to enable flash light when setting up in a dark environment.

How do I access Reolink NVR remotely?

For Reolink PoE NVRs, the web browser remote access is available via IE browser, Firefox, Chrome.

1. Find the IP address of your PoE NVRs.
2. Log on to your router and forward ports for your PoE NVRs.
3. Input the URL into the web browser and log in to view the camera live.

Does Reolink work with Android phone?

Applies to: All Reolink Products. Reolink App is an easy-to-use security camera system surveillance App (for both Android and iOS) with user-friendly interface. Also, it supports remote multi-screen live streaming (up to 16 screens) and video playback (single channel) anywhere.

How do I connect to Reolink NVR?

How to Do Initial Setup for WiFi NVR on the Monitor

1. Applies to: RLN4-211W; RLN4-210W.
2. Connect the NVR to a Monitor or TV via VGA or HDMI cable.
3. Connect the mouse to the USB port.
4. Connect the NVR to the power supply and turn it on.
5. Power on the NVR and the camera.
6. During the startup, you will see the below splash screen.

How do I connect my camera to my phone?

How do I connect Google Clips to additional phones?

1. Step 1: Set up camera sharing. Open the Google Clips app and connect to your camera. Tap Settings Share camera .
2. Step 2: Connect additional phones. On another phone, install and open the Google Clips app.

How do I connect my wireless camera to my phone?

How can I connect my Android phone to my camera via Wi-Fi?

1. Enable the hotspot function in your Android phone, i.e., you set up a Wi-Fi network on your Android phone.
2. Connect the camera to the Android phone’s hotspot-enabled Wi-Fi network.

How can I access my Reolink camera remotely?

How to Remotely Access Reolink Cameras via a Web Browser

1. Find the IP address of your cameras.
2. Log on to your router and forward ports for your cameras.
3. Input the URL into the web browser and log in to view the security camera live.

How do I live stream my Reolink camera?

Set up the camera to connect to the Internet (You may test this point by checking whether the camera could be accessed remotely).

1. Build the RTSP/RTMP URL of your IP cameras.
2. Upload the live view to YouTube referring to this website: https://reolink.com/stream-ip-camera-to-youtube/

Where is Reolink NVR IP address?

You may locate their default IP address when connecting your device directly to your PC with an internet cable. Step 2. Connect the camera directly to your PC with a network cable. You will find the default IP Address of your devices like the example below.

How do I connect my IP camera to my Android phone?

How do I add it?

1. Connect your android device to your wireless network.
2. Install IP Webcam on your android device.
3. Start the IP Webcam application.
4. Press “Start Server” at the bottom of the main menu.
5. Start iSpy, click Add – IP Camera with wizard (or see the wizard tab if using iSpyPro)

Why won’t my Reolink camera connect?

Click Add Device->Scan in LAN to see whether the camera shows up. For the mobile app, please check whether it has a firewall or APN settings, and disable the APN to add again. If still fail to add, please try to reboot this camera and your home router network or hard reset this camera and set up from factory status.

How do I connect NVR to wireless router?

To connect using WPS, power the NVR up without the Ethernet cable attached, then on your router press the WPS button for the specified time, (check your router for this) usually five seconds, then press the WPS button on the rear of the NVR for 2-4 seconds. Leave the NVR for a few moments and it should connect.

Does Reolink make WiFi NVR?

It can be used with RLC 211W/RLC 210W in NVR kits. WiFi cameras that do not exceed 5MP can be connected with RLN4-211W.

Can I connect an external camera to my iPhone?

In addition to using your iPhone’s internal camera for capturing, you can connect action cameras or 360° cameras with your phone and use the Mapillary app to control the capture process. You can capture with an external camera and your phone’s camera at the same time.

Why is my phone saying cant connect to camera?

To fix this problem, you should go to your Android Settings then tap on Apps to find Camera. Remove all updates for it, if it is possible, then clear the cache and data. You will need to force stop the camera app, then re-install the updates again. Test your camera if it is running again.

How do I connect my IPhone to a wireless camera?

Connecting to the Camera from an iPhone, iPad, or iPod Touch

1. Tap the Settings icon in the Home screen.
2. Tap Wi-Fi.
3. Enable Wi-Fi.
4. Press the button to which WIRELESS COMMUNICATION has been assigned or select WIRELESS COMMUNICATION in the camera menus.
5. Select the desired camera.
6. Wait until the connection is established.

How do I connect my IP camera to my mobile hotspot?

(This can be done by going to the settings in your Android phone and turning on the “hotspot” function—usually called “mobile hotspot” or “portable hotspot”. Set a password for the hotspot connection.) Connect the camera to the Android phone’s hotspot-enabled Wi-Fi network.

How do I watch Reolink on my iPhone?

Security Cameras with iPhone App

1. Install security cameras iPhone app, like the free Reolink app.
2. Launch the app and add iPhone security cameras to the app by entering the UID (Unique ID) and password.
3. Click on the feed to view the live of security camera on iPhone.

How do I access my NVR remotely?

Once the network itself has been configured, you can log in to your NVR from any Internet-connected device. Logging in from a computer is usually as simple as entering your DDNS hostname into an Internet browser and using the NVR’s username and password to view your feeds.

Do Reolink cameras support RTSP?

All Reolink IP cameras except battery-powered security cameras support RTSP streaming.