Typical drill bits have markings somewhere on the shank above the threads. It’s small, but it usually has the drill-bit diameter stamped into the metal; the number is written in fractions. For example, the markings may read: 1/4-inch, 3/6-inch or 25/32.
What size is a 1/4 drill bit?
Drill Bit Hole Diameters | ||
---|---|---|
Metric Size | Fractional Size | |
5 mm | .1968 | 7/32 |
6 mm | .2362 | 15/64 |
7 mm | .2756 | 1/4 |
What do the numbers on drill bits mean?
The numbers indicate how easily the drill will “cam out”, or stop driving the bit. Lower numbers mean the drill will cam out with less torque; for example when you are driving a screw into something soft and you don’t want to overdrive it and strip the screw.
What are the 3 measurements on a drill bit?
For Morse taper-shank drill bits, the standard continues in 1/64 inch increments up to 1¾ inch, then 1/32 inch increments up to 2¼ inch, 1/16 inch increments up to 3 inches, 1/8 inch increments up to 3¼ inches, and a single 1/4 inch increment to 3½ inches.
How do you measure the diameter of a drilled hole?
A caliper log records the hole diameter measured using spring loaded caliper arms. Figure 9.2. 1 shows a variety of two, three, four, and six arm calipers. In general, the more arms, the more accurate the measurement of the shape and cross-sectional area of the wellbore.
What size is a 5 HSS drill bit?
Additional Information
Size: | #5 |
---|---|
Material: | High Speed Steel |
Finish: | Black Oxide |
Flute Length: | 3-5/8″ |
Overall Length: | 6″ |
What size is 5mm drill bit?
Metric Tap and Drill Bit Size Table
Tap | Metric Drill | US Drill |
---|---|---|
5mm x 0.8 | 4.3mm | – |
6mm x 1.0 | 5.2mm | – |
7mm x 1.0 | 6.1mm | 15/64″ |
8mm x 1.25 | 6.9mm | 17/64″ |
What size is number 8 drill bit?
What Size Drill Bit for a #8 Screw?
Screw Size | Drill Hole Size (Softwood) | Drill Hole Size (Hardwood) |
---|---|---|
#7 | 3/32″ | 3/32″ |
#8 | 3/32″ | 1/8″ |
#10 | 7/64″ | 1/8″ |
#12 | 1/8″ | 9/64″ |
What does inches mean for drills?
Size: Drills are available in 1/4-inch, 3/8-inch and 1/2-inch sizes. These measurements refer to the size of the drill chuck — the part that holds the bit — and indicate the largest bit shank that’ll fit the drill.A 3/8-inch drill accepts a wide range of bits, making it versatile for common tasks around the house.
What are the numbers on a drill chuck?
You’ll see a list of numbers from 1 to 10 or 20. These are used to set the clutch to deliver a torque range. The higher the number on the collar, the higher the torque and the larger the fastener that can be driven. To adjust your clutch, align the arrow to a lower setting and start driving a screw.
What size is a number 20 drill bit?
Drill Bit Size Chart
Size | Decimal Equivalent | Size |
---|---|---|
74 | 0.0225 | 21 |
.60 mm | 0.0236 | 20 |
73 | 0.024 | 4.10 mm |
72 | 0.025 | 4.20 mm |
What size drill bit is number 29?
9/64"
To Tap This Size Screw Or Bolt: | Use This Drill Bit: | (Closest Fractional:) |
---|---|---|
8-32 NC | #29 | – |
8-36 NF | #29 | 9/64″ |
8-40 NS | #28 | – |
3/16-24 NS | #26 | – |
What is the standard drill bit size?
Drill Bit Size
There are drill bit sets or packs that usually contain bit sizes that range from 1/16 of an inch to 1/4 of an inch, which are common sizes for home and shop projects. Other sizes of use would include 1/2 of an inch, 7/16 of an inch, 5/16 of an inch and 3/8 of an inch.
What size is a 5.5 mm drill bit?
Standard metric drill bit sizes
Drill size | Diameter (in) |
---|---|
5.4 mm | 0.2126 |
5.5 mm | 0.2165 |
5.6 mm | 0.2205 |
5.7 mm | 0.2244 |
How do I know if I have a 1/4 inch drill bit?
Check the Shank
Typical drill bits have markings somewhere on the shank above the threads. It’s small, but it usually has the drill-bit diameter stamped into the metal; the number is written in fractions. For example, the markings may read: 1/4-inch, 3/6-inch or 25/32.
How will you determine the diameter of the bolt hole?
Use the inside jaws to measure the diameter of one of the holes. Before you remove the caliper from the hole, press the button to zero the caliper while it is set to the diameter of the hole. 2. Still using the inside jaws, measure the distance between the far surfaces of the two holes.
What size is #6 drill bit?
3/32"
Drill Bit Sizes For Pre-Drilling For Screws Most Commonly Used Sizes In Bold
Screw Size | Pilot hole size for hardwoods* | Pilot hole size for softwood** |
---|---|---|
#4 | 1/16″ | 3/64″ |
#5 | 5/64″ | 1/16″ |
#6 | 3/32″ | 5/64″ |
#7 | 3/32″ | 5/64″ |
What number is a 10mm drill bit?
Drill Bits. Wilko 10mm Masonry Drill Bit Number 21.
What is a number 7 drill bit?
A number 7 drill bit is 0.2010 inches. As a fraction, the 0.2010 decimal is 201/1000.
Is 3/8 drill bit the same as 10mm?
3/8″ bits have a nominal size being just ever so slightly under 10mm. You can’t drill a hole of any size and put something in it the same size. It must be a bit smaller than the hole you drill.
What can I use instead of a 5/16 drill bit?
5/16 converts to 10/32. Assuming your bit set is that granular, the next larger size is 11/32, and the next smallest size is 9/32. Those aren’t necessarily common sizes, however. The next size up in x/16 would be 6/16, which is 3/8.
Contents