Does Yale Lock Need A Bridge?

A Yale Connect Bridge is needed for remote operability and to receive alerts of events such as manual locking and unlocking, Auto-Lock and Keypad operations, when you’re away from home.Yale Connect Bridge supports 802.11b/g/n (2.4 GHz) Wi-Fi networks.

What does a Yale WIFI bridge do?

YALE CONNECT WI-FI BRIDGE – Enables integrations like Voice Assistant and remote functionalities of your Yale Smart Lock from your phone, such as lock/unlock your door remotely and instant alerts.

Does Yale lock need a hub?

Yale Assure Locks with Zigbee are compatible directly with the Amazon Echo Plus, no additional hub required. To enable the Alexa skill for your smart home, you’ll need to follow the steps provided by your smart home system.

How do I connect my Yale lock to WIFI Bridge?

In the Yale Access app, go to the side menu (upper left), tap Set Up New Device. Choose Set Up A Connect. Choose a lock with which to associate your Yale Connect Wi-Fi Bridge. When prompted, plug connect into an outlet near your door and then follow the in-app instructions.

How do you wire a Yale lock?

How to Set up a Device in the Yale Access App

1. Download the Yale Access App. Download the free Yale Access App on your smartphone and create an account.
2. Enable Bluetooth.
3. Set up the Device in the Yale Access App.
4. Scan the QR Code.
5. Install Your Assure Lock.
6. Power Your Assure Lock.
7. Create Master Entry Code.
8. Remove the Batteries.

How do I setup a wireless bridge?

Place the wireless bridge within range of your wireless router’s signal, and also within a cable’s length of your wired devices. If your router supports Wi-Fi Protected Setup, or WPS, setup is easy. Simply press the WPS buttons on your bridge and router to link them wirelessly.

How do I connect my Yale lock to Google home?

Under Assistant, go to Home Control. Tap the plus sign icon in the bottom right corner to Add devices. Select Yale. Sign in with your Yale Access account information to see your lock(s) listed in Google Assistant’s Devices section.

What hubs work with Yale locks?

Yale locks with Zigbee, Z-Wave or Z-Wave Plus are compatible with Samsung SmartThings hubs and the SmartThings app (both the SmartThings Classic and SmartThings Samsung Connect apps).

How do you put a Yale lock on smart things?

Connect Your Yale Lock To SmartThings

1. Tap “My Home”
2. Under “Things”, tap “Add a Thing” at the bottom of the “Things” list.
3. The app will display, “Looking for devices…”
4. While the Hub searches, bring the lock within 10 feet of the Hub, then: If needed, press any key on the lock to wake it.

Do all Yale locks have Z-Wave?

The Yale Z-Wave Smart Module (AYR202-ZWV-USA) is compatible with all Yale Assure Locks and Levers. To control your lock with your phone, you must purchase a compatible Z-Wave Smart home hub.

How do I connect my Yale lock to my nest?

How to Connect the Nest x Yale Lock to the Nest App

1. Sign into your Nest account or create one. If you’re new to Nest: Go to the Apple App Store or Google Play to download the Nest app and create a free account.
2. Scan the QR code.
3. Add the lock to your Nest account.
4. Create Nest passcodes.

How do I add a Yale lock to my Yale app?

Open the Yale Secure app and create a new home by tapping the + icon in the top right corner. Tap the + icon next to your home name to add a new lock. Tap the Yale lock when it appears as an available device.

How do I use Yale secure?

While holding your phone close to your Yale lock, open the Yale Secure app.

1. Wake the keypad by touching it with three fingers.
2. Enter your master pin code followed by the gear key.
3. Tap 7, followed by the gear key.
4. Tap 1, followed by the gear key.
5. Your module has now been successfully enrolled.

How do you calibrate a Yale lock?

Open the Yale Access App and navigate to the affected lock. Select Lock Settings. Scroll to and tap on Calibrate Lock. Follow in-app instructions to recalibrate.

What is the difference between bridge mode and wireless bridge?

The distinction is important: A wireless access point connects users to a network by creating a wireless signal they can use. A bridge, in contrast, connects separate networks —your preexisting wireless home network to all of the devices connected to the bridge.

Does WIFI work in bridge mode?

Yes, but bridge mode will only work if you’re using a single Wifi device. If you want to create a mesh network with multiple devices, your router or primary Wifi point cannot be in bridge mode.

Does bridge increase speed?

Bridging DOES NOT INCREASE PER CONNECTION DOWNLOAD SPEED! All bridging lets you do is (assuming your OS is smart enough to not swap inputs for connections that need the same IP to work) use two different outputs for two different streams.

Does Yale alarm work with Google home?

Thanks to this integration, Yale’s Sync Smart Alarms together with Smart Locks, Smart Plugs, Window Sensors and Smart Cameras? ?can now be activated, using just your voice.” will activate the Google Assistant in conjunction with the Sync Smart Home Alarm and any other security devices connected to it.

Can Google unlock doors?

Can Google unlock doors? Yes. Google Assistant has Smart Door Lock support. To get a Smart Door Lock working, like with an August Door Lock, you first need to have a specific hub that serves as a bridge between your home network and the Smart Door Lock’s Bluetooth connection.

Does Yale assure work with Google Assistant?

“Hey, Google, unlock the front door.”
Unlock your Yale Assure Lock – Connected by August for trick-or-treaters with Google Assistant: “Hey Google, unlock the front door.” The Google Assistant will then ask you for a security code, which is set up during the integration process.

Does the nest Yale lock work with SmartThings?

Yale Assure Lock SL, Wi-Fi Smart Lock – Works with the Yale Access App, Amazon Alexa, Google Assistant, HomeKit, Phillips Hue and Samsung SmartThings, Satin Nickel.