For roller blinds, you only need to measure the width at the top of the recess. This is because the fabric is narrower than overall width of the blind which includes the controls and brackets.
What is the width of a blind?
Blind Slat Sizes
Deeper windows look best with the widest slat sizes, and small, shallow windows work better with the narrowest slats. Common slat widths are 1/2 inch, 1 inch, or 2 inches, which is the most popular width.
How do you measure for blind fittings?
To take the correct measurements for a recess-fit blind, accurately measure the inside width of your window in three places, writing down the narrowest. This is your recess width. Then measure the inside drop of your window in three places, writing down the shortest. This is your recess drop.
What are standard roller blind widths?
The maximum fabric width most roller blind fabrics come in is 3000mm. (3 metres), So something like a standard sliding door is no problem for a roller blind to fit along the top. There is a new range of roller blind fabric that now spans 3200mm wide.
Do blind measurements include brackets?
Fitting blinds without or outside a recess requires a bracket or track to be fitted above your window, fixed directly to the wall or to a wooden batten more than 5cm (2″) above your window frame. Measure from the top of the fitting to the sill to ensure your blind will extend to provide full coverage.
How do you measure for roller blind recess?
If you want to fit roller blinds within your recess, measure the area like this: Measure the width of the window, starting at the top. Use the edges of the window recess as your guide. Now measure across the middle and bottom of the window.
Is it easy to cut roller blinds to size?
Cutting a roller blind is fairly simple as long as you make the correct measurements. By laying the blind flat and marking out your desired measurements you will be able to ensure your blind is cut to fit your window. When it comes to cutting the blind, you should use sharp scissors for a clean finish.
Can roller blinds be fitted outside recess?
A benefit to fitting roller blinds outside of a recess is the increase in light that it produces.Conversely, when a roller blind bracket is fitted outside of a recess, it will be situated far above the top of the window itself, enabling the maximum amount of light exposure possible.
How much gap do you need for roller blinds?
When measuring for inside mount Rollers, make sure that you have at least 60 mm clearance inside your window recess. Measure the hard width across the top inside the window recess. *It is important that you take your width measurement from the top of the window as this is where your brackets will be fitted.
How wide can a single blind be?
As you measure your windows, you may find a window opening or two that are very large widths. Payless Decor blinds and shades have maximum widths that can be six, seven, or eight feet or longer, and thus can cover many large openings.
Should blinds be flush with wall?
1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
How wide should outside mount blinds be?
Outside Mount
To minimize light leakage and ensure privacy the blind should overlap the window opening by 4″ on each side for a total of 8″ on entire width. 2) Measure distance from where the top of the blind will be located to the window sill.
What do you do when your blinds are not wide enough?
Blinds Too Wide? Try An Outside Mount. The easiest solution for blinds that are too wide is to install them as an outside mount instead of an inside mount. The included installation brackets are compatible with either mounting option, so this is a quick fix.
How do you cut the width of a blind?
Cutting down the slats
- Align the slats so that they are even.
- Using a clamp or rubber bands, secure the slats together into position.
- Wrap the slats with masking tape to prevent chipping.
- Measure where you want to cut and mark a line with your pencil.
- Lay them on the saw and line up the blade where you need to cut.
How do you cut roller blinds without fraying?
Use scissors to remove any frayed material or loose strings that you see on the edge that you cut. If you need to make additional cuts or trims, use the same straight edge and knife that you used the first time.
Can you fit a roller blind above a window?
You want your mounting brackets to be far enough away from these obstructions that you can open and close the blinds easily. You’ll also want to consider any obstructions in the room that may make it difficult when it’s time to fit your roller blinds.
Should blinds be wider than window?
Not Adding Width To Outside Mount Blinds
We recommend going at least 2″ wider than the opening on either side, so 4″ total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.
Contents