Does Lund Recommend A Transom Saver?

Lund does not have a recommendation whether to have a transom saver or not.

Are transom savers worth it?

“There is a great deal of impact on the transom while traveling down the highway,” notes Ranger’s Trailer Engineer Rick Huddleston, “and a transom saver [connected to the rear cross member of the trailer] is far more effective at preventing stress at the engine bracket and transom than using the ’tilt/lock’ feature on

Does mercury recommend a transom saver?

Hydraulic Trim and Tilt Damage
While there is a lot of debate on the transom savers or motor support issue, we do not recommend trailering using your service/engine lock for engine support when trailering. Both Yamaha and Mercury recommend against it as well.

What years did Lund have transom issues?

This is a common problem with 2000 to 2007 vintage Lunds. That was the end of the Genmar era before they were purchased by Brunswick. Unfortunately there is no warranty on these boats.

Do Lund boats have wood transom?

No wood in transoms throughout the Lund line up. Its amazing that it took any boat company this long to figure out that wood as a component material was a bad idea. “WHAT MATERIAL IS USED IN LUND TRANSOMS? In 2017, select models have a composite transom.

How do I choose a transom saver?

DETERMINING THE CORRECT “TRANSOM SAVER”.

  1. (#1) Hitch trailer, with boat on it, to tow vehicle and place on flat surface.
  2. (#2) Raise motor, with power trim or settings, so the bottom of lower unit is 12″ to 16″ off the ground.
  3. (#3) Choose between “Roller Mount” or “Frame Mount” models.
See also  How Do I Get The Most Out Of My Sony Camera?

Should you leave your outboard up or down?

It’s best to tilt your outboard up when leaving your boat in the water to prevent marine growth from forming and from corrosion eating away at its metal parts.

Should you travel with your outboard up or down?

Generally, you should tow your boat with the motor down, especially if your trailer offers good ground clearance. Additionally, most manufacturers recommend that you should pull your boat down. However, you can choose to tow with the motor up if you desire ground clearance.

Should you store your boat with the motor up or down?

When you park the boat for the winter keep the motor trimmed or tilted down, especially if it’s outdoors. This will allow all of the water to drain out of the motor’s cooling system. If it’s tilted up, some water may remain in the motor, where it can freeze and cause a cracked block or a ruined water pump housing.

What year did Lund switch to composite transom?

What material is used in Lund transoms? In 2017, select models had a composite transom. In 2018, all transoms were made with a composite material (exception of the Angler/Renegade/Jon Boats/Predator have aluminum transoms).

Do Lund boats hold their value?

Although some attribute this to their higher initial price point, Lund boats have a reputation for holding their value. A 1775 Impact Sport made in 2015 sold new for $29,725 in that year. This boat has a current average resale value of $22,900. This is a depreciation of 23%, which is very good for about 5 years.

See also  Why Do You See Double?

Is Lund a good brand?

The Quality
Lund Boats is famous as a high-quality brand. Many buyers choose a fishing boat based on a combination of price and quality, but if you’re looking for the best of the best in quality, go for the Lund. Lund Boats costs more than most of its competitors on the market, but the quality is unmatched.

Are Lund boats riveted or welded?

Lund Boats are Riveted
Aluminum boats are either riveted together, or they are welded together. Riveting is easier and cheaper than welding, and it helps boat manufacturers create boats quicker and cheaper. The downside is that a riveted boat is more likely to leak.

Is Lund a building boat?

Since 1948, Lund has been building boats from the heart of lakes country in New York Mills, Minn. Built with professional grade materials to withstand a lifetime of use, Lund Boats are guide tested and wilderness proven, and demanded by more camps, resorts, fishing guides and professionals throughout North America.

How long does it take to get a boat from Lund?

Special order is the only option if you want a Lund. When I ordered it they said 4 to 6 weeks.

How long do transoms last?

Step 4: Fabricating the Transom
From the looks of the transom in this boat, I would estimate a typical transom will last about 20 years or so before they need to be replaced.

How high should transom saver?

You’ll probably want a transom saver that extends from 21” to 31” which gives many options to position your outboard optimally on the trailer.

See also  How Do You Test A Ball Joint And Tie Rod?

How much does a 9.9 motor weigh?

9 and F8, provide nimble, lightweight, efficient power you can take with you. These SOHC 212cc two-cylinder wonders are both under 90 pounds.
Specs & Compare.

Engine Type 2 cyl
Fuel Induction System Carb
Weight † 39 kg (87 lbs) – 42 kg (93 lbs)
Recommended Fuel Octane 87

Do you need a transom plate?

While you do not need a transom plate, they are a great way to protect your transom from damage. A transom plate will not only extend the life of your transom but also any add-ons you have. If you have an older boat, a transom support plate is absolutely necessary for keeping your boat going.

Is it OK to store an outboard motor on its side?

It’s almost never a good idea to lay an outboard motor down on its side or back.Mercury Marine recommends upright storage to allow the water to drain from the motor, but Mercury also says that a motor may be stored on its side after the water has drained completely.

Is it OK to run an outboard out of water?

Running the engine without a water source for any length of time will cause damage, so you’ll need to attach a hose to the motor’s water intakes. Some newer motors have built-in attachments that accept a hose nozzle. If your motor doesn’t, you’ll need a set of motor flusher muffs.

Contents

This entry was posted in Mounts & Rods by Alyssa Stevenson. Bookmark the permalink.
Avatar photo

About Alyssa Stevenson

Alyssa Stevenson loves smart devices. She is an expert in the field and has spent years researching and developing new ways to make our lives easier. Alyssa has also been a vocal advocate for the responsible use of technology, working to ensure that our devices don't overtake our lives.