Upright and chest freezers require a 120 volt, individual, properly grounded branch circuit with a 3 prong grounding type receptacle, protected by a 15 or 20 amp circuit breaker or time-delay fuse. The freezer should be on a dedicated circuit.
Can you plug a chest freezer into a regular outlet?
An upright or chest freezer should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. A 115 Volt AC, 60 Hz, 15- or 20- amp, fused, grounded electrical supply is required.
How many amps does a small chest freezer use?
A 20 cubic foot freezer will typically use less than 4 to 5 amps when running. Upon start up, the a 20 cubic foot freezer will use around 10 to 15 amps.
Can you plug 2 chest freezer into a regular outlet?
You can plug a freezer and a refrigerator into the same outlet if their total draw doesn’t exceed the capacity of the circuit.It is better to place the appliances on separate dedicated circuits that only have one outlet.
What size breaker do I need for a chest freezer?
Wiring and Electrical Considerations
A 220-volt freezer needs 12?3 wiring and a 220-volt outlet. A 110-volt freezer can run on a 15 or 20 amp breaker, but a 220-volt one requires a 30-amp breaker.
Does a garage freezer need a dedicated circuit?
You should have refrigerators and freezers installed on a 15-20 amp dedicated 120 volt circuit.Keep in mind that even if you don’t place your freezer or refrigerator in your garage, it is still required that freezers be on a dedicated 120 volt circuit.
What appliances need a dedicated circuit?
Dedicated circuits are highly recommended for all these devices:
- Electric oven, stove, or range.
- Refrigerator.
- Stand-alone freezer or chest freezer.
- Dishwasher.
- Microwave.
- Garbage disposal.
- Toaster oven.
- Countertop convection oven.
How much power does a small freezer use?
Compact and small freezers that are 5 cubic feet can use around 1 amp or 100 watts while running. During start-up, however, they use approximately 6 amps or 700 watts.
How many watts does a small chest freezer use?
Average Freezer & Refrigerator Wattage Consumption
A freezer uses 300 to 700 watts, depending on the size and model year. For example, a 13 cubic foot frost-free freezer consumes around 300 watts, while a 20 cubic foot chest freezer utilizes 350 watts.
How many amps does a 3.5 cubic foot freezer use?
A 3.5 cubic foot freezer such as the Midea Freezer has a compressor that draws a running current of 0.83 Amps, and at 120 Volts gives a power consumption of 100 Watts.
Can a deep freezer and fridge be on same circuit?
Refrigerators are considered noncontinuous duty loads. Loads that draw current for less than three hours at a time are allowed to be on the same circuit with other noncontinuous loads, as long as the total load does not exceed the circuit breaker rating.
Can you use an extension cord for a chest freezer?
Grounded Extension Cord for Freezer
The power cord on a freezer or refrigerator has a ground pin, so you need a UL® listed 3-wire grounding appliance extension cord, and you must plug the cord into a grounded three-pin receptacle.Never use a damaged extension cord.
Can I plug a deep freezer into an extension cord?
GE strongly recommends that an extension cord not be used with a freezer due to the potential safety hazards under certain conditions.
What is the amp draw of a chest freezer?
All of our upright and chest freezers (excluding international units) function at 115V AC, 60 Hz and have approximately a 5 amp draw. Freezers typically draw extra current during start up (approximately 2x the running amp draw). The freezer should be on a dedicated circuit.
What is a dedicated circuit?
A dedicated circuit is used by one appliance only. Meaning the circuit is not shared with any other devices or appliances. Nothing else is able to draw energy from this circuit. The purpose of the dedicated circuit has one purpose.Most major appliances such as; washer/dryer, hot tub, large kitchen appliances etc.
How many amps does a mini fridge use?
So , 15 20 amps is the average quantity of electric current used by the fridge . It might also depend on the voltage drawn by the refrigerator and the power it requires for it’s functioning .
Does a freezer need to be plugged into a GFCI outlet?
A. That “protector outlet” you’re referring to is a GFCI, or “Ground Fault Circuit Interrupter” receptacle, and GFCI’s are required by building code in garages, kitchens, bathrooms, and on the exterior of new homes.So freezers and refrigerators should never be plugged into GFCI’s.
Why does my freezer keep tripping the breaker?
Every time your compressor turns on to run the cooling cycle, it will trip the breaker. When this happens, it is typically due to a grounding issue with the compressor that is causing the part to essentially become overloaded with electricity. Essentially, it means it is faulty and needs to be replaced.
Are GFCI outlets required in garage?
GFCI protection is required for 125-volt to 250-volt receptacles supplied by single-phase branch circuits rated 150 volts or less to the ground. GFCI receptacles are required in bathrooms, garages, crawl spaces, basements, laundry rooms and areas where a water source is present.
How can you tell if an outlet is dedicated?
A 20 amp receptacle will have one slot that looks like a sideways T. If it is a dedicated circuit it would be a single receptacle instead of a duplex. If you look at the breakers in your breaker panel and there is a “20” on the handle, it’s a 20 amp circuit.
What happens when you plug in too many appliances?
A power overload point is when the maximum amperage of the electrical circuit is exceeded. Plugging too many appliances into a single power point can cause this. A short circuit and possibly a fire can be the result of an overload.
Contents