So, going back to our original question, “Is shooting Log like shooting Raw?” The answer is still “yes and no.” Hopefully, now you can see why. Raw is not Log because Log is in a video format, and Raw is not video. Raw data has no video processing baked in and has to be converted into video for viewing.
Should I shoot log or RAW?
Logarithmic functions on cameras were designed to capture the maximum dynamic range that the sensor was capable of, as well as colour information, and cramming it all into a smaller ‘container’ without having to record raw. Log works best if it is recorded with 10-bit colour precision.
Do you have to shoot in log?
Log is a VERY flat picture profile which retains a hell of a lot of contrast information in the image. Log is so flat it can become difficult to properly judge a shot because you are looking at something which looks so milky and lacking in colour. In this instance, an external monitor will help.
Is it worth shooting in RAW?
In Praise of Raw
Now your camera is set to take raw images, you have a greater ability to adjust the look of the image than if you have it set to take JPEGs. Raw files save all the data collected by the sensor and allow for non-destructive development of the photo. This is unlike shooting to produce JPEG files.
Is s log the same as RAW?
It’s important to remember that LOG is still a video format. So, unlike shooting RAW, you’ll still be able to see LOG footage on an external monitor without a conversion step. Additionally, because it’s a video format, certain things such as white balance and exposure are going to be baked in.
What is a RAW log?
What are raw logs? Raw logs provide historical information on the CDN traffic that flowed through your account. Each raw log contains platform-specific information for a given time period and location.
Why does raw footage look flat?
The color of raw footage actually is flat—that is, it was shot in a video type called “flat” that doesn’t include a lot of the color information in a finished video file. The footage will look lifeless, but only so that the editors have the most control over the end result.
Should I shoot with a LUT?
When you should use LUTs
Because of these drawbacks, LUTs make the most sense during production and the early stages of post. If you are working on a shoot and know what kind of look you want to put on the footage, using a LUT on set can help your collaborators see your vision and help make key decisions easier.
Should I shoot v log?
The key benefit to shooting in V-Log is to have the ability to extend the camera’s dynamic range, and thus have greater latitude in post-production.This is because the camera sensor is preserving its maximum colour information possible, and thus the most malleable image when in post-production.
What does JPEG stand for?
Joint Photographic Experts Group
jpeg) stands for “Joint Photographic Experts Group“, which is the name of the group who created the JPEG standard.
Do professional photographers use RAW or JPEG?
As you might expect, the tradeoff for these detailed files is that RAW files are quite a bit larger than JPEG files. Still, most professional photographers shoot in RAW because it gives them more information to work with in the post-processing phase.
Why does JPEG look better than RAW?
It’s because when you shoot in JPEG mode, your camera applies sharpening, contrast, color saturation, and all sorts of little tweaks to create a fully processed, good-looking final image.
What is log and Lut?
Recording in Log allows your camera to capture its maximum amount of dynamic range. A LUT is applied to your camera’s viewfinder or monitor, but not generally to the recording. The benefit of this is that you can see an image on location that is closer to what the final image will look like after colour grading.
Should you shoot photos in a flat profile?
A flat or neutral picture style will give you an image with the least contrast, maintaining better highlight and shadow detail. This allows you to bring out those details in processing.I had been shooting RAW for some time, but have left the Picture Style set to Standard or Landscape, for the most part.
What is the difference between RAW and ProRes?
ProRes RAW applies the same principles of ProRes to the raw camera image data. It applies compression that is near lossless. ProRes adjusts compression to hit a target data rate (file size) while ProRes RAW adjusts the bit rate to hit a target quality.
Why do we need RAW logs?
Log is video and has things like white balance baked into it. They’re very much not the same; however, they’re both designed to get the most information out of the sensor. Raw is getting everything the sensor has to offer; likewise, Log curves are designed to get the most tonal range out of the sensor.
What is log in photography?
A log profile, or logarithmic profile, is a shooting profile, or gamma curve, found on some digital video cameras that gives a wide dynamic and tonal range, allowing more latitude to apply colour and style choices.
What does filming in log mean?
LOG format is when you intend to go back and do extensive color grading to the footage. Different cameras have different log profiles, SLog being the kind of LOG in Sony Cameras. It is not always used because some people don’t want to do extensive color correcting.
How do you charge raw footage?
The cost for the client to purchase the raw footage is 150% of the contract price. If a clients project is $10,000 then the rights to the raw footage comes out to an additional $15,000.
How do I view raw footage?
First, open File Explorer and the folder that includes your RAW images. Next, you should right-click a RAW image to open the context menu and select Open with > Choose another app. Then, select Photos App as the default software for the RAW file.
What is the purpose of LUTs?
LUT stands for “look-up table.” A LUT is a tool that lets filmmakers, editors, and colorists save particular color grades as a template. Think of a LUT as a color preset that a filmmaker can readily turn to when working on a project.
Contents