It is not recommended to use Reolink cameras on third-party NVR, as there might be compatibility problems between Reolink Cameras and third-party NVR, and it’s not conducive to troubleshooting.
Do Reolink cameras work with any NVR?
Applies to: All Reolink cameras. It’s not suggested to add Reolink IP cameras to other brands of NVRs. We recommend that you should choose Reolink NVRs when using Reolink IP cameras.
Will Reolink cameras work with Hikvision NVR?
After much frustration eventually got Reolink camera working with HIK NVR. It just needed the default ports that the Reolink uses changing. The NVR expect ONVIF management port to be 8000 and the HTTP port to be 80. The built in camera Reolink app can be used to change these.
Can I use any NVR with my cameras?
Because each IP camera has its own user interface and camera options built into the camera itself, not all IP cameras are completely compatible with all NVRs.
Can Reolink cameras work on Lorex NVR?
A: No, Reolink Nvr only works with reolink cameras. Helpful?
Does Reolink software work with other cameras?
Yes, cameras/NVRs from different locations can be added to the same Reolink APP from both locally and remotely. Please refer to the article here about the instructions to Add Reolink Products via Reolink App.
Will any IP camera work with Reolink?
And that’s it! This Reolink model RLN8-410 has been confirmed (by me) to work with all IP POE 3MP Swann, Qcam & Amcrest cameras that are rated ONVIF compliant (which most if not all are from these three brands).
Is Reolink a Chinese company?
Another Chinese disruptor, Reolink, is gaining attention. This one is selling direct from its own website, with fulfillment by Amazon. And a number of their prices make Dahua and Hikvision look downright expensive.
What is better than Reolink?
Which one is better? Let’s find out in this comprehensive Lorex vs. Reolink comparison guide.
Lorex vs. Reolink: A Security Camera Comparison.
| Security Product Comparison: | Lorex | Reolink |
|---|---|---|
| SafeHome.org’s Review | ||
| Customer Service | 8.4 | 6.2 |
| Value | 8.5 | 7.3 |
| Equipment | 9.5 | 7.2 |
Is Amcrest better than Reolink?
In the comparison between Reolink and Amcrest, the winner is Amcrest. Amcrest offers top-notch video quality, clean recordings, a superior field of view, and better motion detection and audio.
Can 3rd party cameras work with Reolink NVRs?
This Reolink model RLN8-410 will work with third-party compatible (ONVIF compliant) cameras. Just make sure to enter the password “12345” (and NOT “123456”) and NOT the 3rd-party NVR password that the cameras were originally connected to. To do this goto the NVR’s menu screen and click on “IP Channel”.
How do I add another camera to my Reolink?
For cameras or NVRs that are not set up yet, please finish the intial setup firstly. For cameras or NVRs that are already connected to a network (router), there are 3 methods to add it to Reolink app.
Can I use any PoE camera work with any NVR?
Actually, if you get a complete PoE IP camera system set, which means both PoE security cameras and NVR are from one manufacturer, then you can simply connect all cameras with the NVR directly via the 4, 8 or even 16 PoE ports on it.
Do I need the NVR with Reolink?
Reolink PoE cameras and NVR can work without the internet, but the functions supported may be limited. You need to use an Ethernet cable to directly connect your PoE camera to your computer.
2. With a router but no internet available.
| Local Access (in LAN) | Yes |
|---|---|
| Audio Alarm | Yes |
| Push Notification | No |
| Email Alert | No |
Can I mix and match security cameras?
Each camera style has different benefits and capabilities.You can even mix and match cameras of different types on the same surveillance network, as long as they are all compatible with the recorder.
How do I add a third party camera to Reolink NVR?
How to Add Reolink Cameras to Onvif Device Manager
- Launch Reolink Client and add your devices, then go to Device Settings -> Recording -> Encode, select Base Line for H.
- Launch Onvif Device Manager, the device list will automatically show the devices that are compatible with Onvif.
Can you mix and match Reolink cameras?
The good news is that the Reolink NVR works with both Reolink wireless and PoE cameras, so you may mix and match the different security camera types.
What cameras work with Reolink?
Work with Reolink 4K/5MP/4MP Cameras
- Cams Supported: B800, D400, B400,D800 RLC-410-5MP, RLC-520-5MP, RLC-423, RLC-422, RLC-511, etc.
- The Reolink NVRs are designed for Reolink security cameras ONLY.
Does Reolink lumus support RTSP?
Applies to: Reolink POE NVRs and all Reolink IP cameras except for battery-powered cameras and B800/D800/B400/D400/E1/ Reolink Lumus. It cannot be used directly on web browser, since web browsers don’t support RTSP protocol.(or you may install RTSP plug-in on web browser to view RTSP stream.)
Will Amcrest cameras work with Reolink NVR?
Reolink NVRs only support Reolink Cameras; Amcrest is ONVIF compliant. If you buy a Reolink recorder, you need to buy their own cameras as well since their device does not offer support for third-party cameras.
Is Reolink same as hikvision?
While Hikvision supports ONVIF and RTSP on all their IP cameras, Reolink is a real mix. The RLC-410 does support both protocols but the B400 model doesn’t. ONVIF ensures that your camera will work with standards-compliant gear from other manufacturers.
Contents