Our shutters are designed as most shutters on the market, with the slats (also called louvers) closing fully flat in the upwards direction. While you can rotate the slats to point downward, the fully flat closure will occur by pushing the slats closed in the upwards direction.
Should plantation shutters close up or down?
Tilting the shutters all the way down is a good position to leave your shutters in if you’d prefer not to adjust them with the light.But if you want to maximise the light coming into the room without opening the louvres completely, tilt the shutters downwards to bring as much light into the room as possible.
How do plantation shutters close?
Plantation shutters consist of a frame which is permanently attached to your window opening, and a shutter panel which is hinged inside the shutter frame.Closing them is as simple as swinging each shutter panel back toward the window.
Should shutter slats be up or down?
The louvers must slant down and away from the window opening to best protect from both elements when closed. If the shutters will be operable, they should be installed with the louvers angled up and away from the building when fully open.
Can shutters be lifted up?
The most innovative feature is the ability to raise your plantation shutters. Lift from the bottom and change the height of the shutter to any size within the window.
Which way do you turn plantation shutters for privacy?
The direction ? up or down ? to close blind slats is a matter of personal preference, but if you want more privacy, tilt them up, with the rounded side facing out. With window blinds tilted up, passers-by can’t see in: The convex side faces the window, creating less space through which to view.
Do plantation shutters fold back?
Full height shutters are an incredibly popular design because they offer complete privacy, they’re great for insulating the home and they also help to keep out unwanted noises. Another big benefit is that they’re incredibly easy to open simply swing open and fold them back.
How should shutters be hung?
When open, shutters should be located tight to the window covering all or part of the window casing and projecting outward at the window edge. Architecturally, it is not necessary for a feature to actually be functional; however, it must always appear functional.
Should blinds be up or down in summer?
During summer to keep your homes cool you turn the slat upwards. It will reduce heat gain inside the house and help you control heat better. When the blinds are tilted upwards, the heat tends to flow upwards towards the ceiling.
How do you keep plantation shutters closed?
Adjusting Louver Tension
Locate the hole on each side of the shutter panel. Inside the hole is a screw called the tension screw. 2) Using a Philips head screwdriver, turn the screw ? turn to the right to tighten the louvers or ? turn to the left to loosen them.
What are the pros and cons of plantation shutters?
Pros and cons of shutters
Pros | Cons |
---|---|
They can help control the temperature | They can be the more expensive option |
You can use them to manipulate the light stream | Difficult to fit yourself |
Shutters add value to your home | Cannot be raised completely |
Durable |
Can plantation shutters be cut down?
It is best to trim the shutters with a stationary power saw, like a power miter saw, a table saw or a radial arm saw, because it is difficult to make accurate cuts with a hand saw. Trim the bottom of the shutters first, but do not cut off more than three-quarters of an inch.
Should you close your blinds at night?
Closing window blinds can also save energy in the winter. During cold winter nights, heat is lost through windows. Closing the blinds adds some insulation to the windows, reducing heat loss during cold periods. Some blinds also reflect heat back into the room.
Should blinds be up or down in winter?
During the winter months, you should open your blinds to let the sunlight in to warm the room. However, if the forecast is cloudy, turn your blinds down to add insulation and help keep cool air at bay.
How do you close blinds?
A step-by-step guide to closing window blinds
- Step 1: Locate the pulling string. Find the pull-string, which typically hangs on the right side of the shades.
- Step 2: Unlock the blinds.
- Step 3: Adjust the slats.
- Step 4: Lower the blinds.
- Step 5: Lock the blinds.
- Step 6: Shut blinds.
How far should shutters be from window?
In most cases, the height of decorative shutter that is most appropriate is from the top to the bottom of the window trim. If there is a sill at the bottom of the window and you are installing vinyl shutters, it is important to leave a gap of at least 1/4 inch to allow the vinyl material to expand and contract.
Can you use plantation shutters with tilt in windows?
There are specialty frames that can be used when installing plantation shutters that allow for tilt in window operation. They are called L frames, “tilt-in” Z frames, or you can use a deco frame. Given you have molding around your windows, you can have a qualified shutter dealer pick the right frame for you.
How much space do you need for shutters?
For the most authentic look, we recommend measuring only the window opening not including any frame or trim around it. Typically, the width of your shutters should be half of your total window width. However, vinyl shutters are available in a handful of sizes.
Why wont my shutters stay open?
Why Won’t My Vinyl Shutters Stay Open? Probable Cause: The tension in the louvres has slackened with time. Solution: You can solve this problem by tightening up the tension on one of the middle louvres in the shutter. Once the tension is tighter in that louvre, all of the louvres will stay open and work properly.
How do you tighten plantation shutters without tension screws?
If it doesn’t get tight, you likely have a stripped out hole. This is generally fixed by removing the screw, inserting a toothpick or wooden matchstick (without the head) into the hole, and then re-inserting the screw. Sometimes the latches or magnets that hold the shutters closed also become loose or get damaged.
How long do PVC shutters last?
Longevity of Shutters
PVC is 3 times heavier than a traditional timber shutter and as UV degradation sets in the panels can warp and drop from the weight. We discovered that windows made from aluminium have an expected life of 45 plus years whilst UPVC windows require replacement around the 25/30 year mark.
Contents